
Before you specify
Frequently Asked Questions
What is the difference between the CX34-44 and the CX22-44?
Pass rate, essentially. Both are P-4 cross-cut machines on the same cabinet, with the same 400 mm feed opening, the same 165-litre bin, the same bags and the same two-year warranty. The CX22-44 is rated 19-22 sheets at 70 g/m2; the CX34-44 is rated up to 34. If your shredder is a bottleneck, that is the upgrade. If it sits idle most of the day, the CX22-44 does the same job for less.
Why is the exact cut size not listed?
Because we could not verify it from ACCO documentation for this specific model. The machine is designated CX34-44/P4 in the manufacturer's operating manual, which fixes the security class: DIN 66399 P-4 permits a maximum particle area of 160 mm2. The CX22-44 on the same cabinet cuts 4 x 40 mm. Rather than assume the CX34-44 is identical, we have left the figure out. Contact us if you need it confirmed in writing for a tender.
Will it shred staples, clips, cards and CDs?
Yes. The operating manual covering this model states the machine handles paper plus small amounts of CDs, credit and customer cards and discs, and the sibling CX22-44 datasheet confirms staples and paper clips. Feed hard media in ones rather than handfuls and let the cutters clear between items. Ring binders, laminated pouches and bulldog clips should still be removed.
What bags does it take, and are they included?
It takes ACCO shred bags part 1145482, the same liner as the CX22-44, and no bags are supplied with the machine. Budget for them as a running cost from day one. The bin is a 165-litre pull-out unit, so a generic 44-gallon liner will physically fit, but bags that are too thin tend to tear against the cut edge of paper particles.
How many people can realistically share it?
A floor of twenty-five to fifty is a reasonable planning figure, given continuous duty, a 400 mm throat and up to 34 sheets per pass. Beyond that the limit stops being the cutting head and becomes the bin: 165 litres of P-4 cross-cut waste from heavy use will need emptying more than once a day. At that point you are looking at a larger-bin machine rather than a faster one.
Does it need a dedicated electrical circuit?
The manual specifies 120 V on a 15 A minimum circuit for North America. A standard office outlet meets that, but sharing the circuit with a copier or a kettle is a common cause of nuisance tripping, because a shredder draws its highest current at the moment a loaded cutting head starts turning. Where practical, give it its own outlet.
What does the warranty cover?
ACCO's operating manual states two years covering the cutters and other parts for the CX34-44 and CX22-44. That is a shorter cutter warranty than some German-built competitors offer, several of which cover cutting cylinders for the life of the machine at P-4 and P-5. It is worth weighing if you expect very heavy use, since the cutting head is the most expensive component to replace.