GBC Momentum Paper Shredder, M20-32, Micro-Cut, Anti-Jam, 20 Sheets

The Momentum M20-32 is the departmental micro-cut machine in ACCO's Momentum line: a 12-inch throat, a 32-gallon bin and twenty sheets a pass at DIN 66399 P-5.

The throat is the specification worth paying attention to. At 12 inches it takes ledger and A3 flat, which the 9-inch models in the range cannot, and it lets a whole handful of mixed paper go in without being squared up first. Combined with the largest bin ACCO fits to a Momentum cabinet, that is what makes this a machine a floor can share rather than a team.

Key Features

• P-5 micro-cut at approximately 1.98 x 15.08 mm, just inside the 30 mm² DIN 66399 limit.
• Twelve-inch throat. Ledger, A3, legal and letter all feed unfolded, and a full handful goes in without being aligned.
• Twenty sheets per pass on 20 lb paper — a high figure for a P-5 machine.
• 32-gallon bin on castors, the largest in the Momentum range.
• Shreds CDs, DVDs, credit cards, paper clips, staples and junk mail, so a whole floor's mixed waste can go in one machine.
• Active Sensing Anti-Jam Technology, which stops an overload before it becomes a jam.
• Runs continuously until the bin is full rather than working to an on/off duty cycle.
• TAA compliant, two-year warranty, 132.3 lb on wheels.

Specifications

ACCO describes the Momentum range as ultra-quiet but publishes no decibel figure for it, so we have left that row out rather than repeat an unsourced number. Motor wattage is not published either. ACCO's specification table on this model reads P-4 while its product title and range comparison chart both read P-5; the published particle geometry of roughly 1.98 x 15.08 mm is just under 30 mm², which is P-5, so that is what we list.

What's in the Box

Shredder on its 32-gallon castered bin, with power cord and operating instructions. Bags and oil are separate. ACCO does not name a bag part for the 32-gallon Momentum bin; its 30-gallon bag, part 1765015, is the closest published size but ACCO does not list this model against it, so confirm before ordering a case. Shredder oil is part 1760049.

Who Should Buy This — and Who Should Not

Buy the M20-32 for a department that works to P-5 and generates real volume — twenty sheets a pass, a 12-inch throat and 32 gallons of capacity make it a machine people can walk up to with an armful. It is also the sensible choice if your paper is not all letter size: ledger drawings, A3 reports and oversized forms feed flat here and will not on the 9-inch models.

Do not buy it for a small office. It weighs 132 lb, stands over three feet tall and carries a bin most small teams would never fill; the M12-12 is the same P-5 cut in a 12-gallon cabinet and is the honest recommendation for three or four people. Do not buy it if you want maximum throughput rather than maximum security — the X26-32 is the identical cabinet at P-4 and takes 26 sheets a pass. And if the requirement is P-6 or P-7, no Momentum model reaches it.