
Before you specify
Frequently Asked Questions
Will ledger and A3 paper fit?
Yes. The throat is 12 inches wide, which takes ledger at 11 inches and A3 at 11.7 inches fed short edge first, as well as letter, legal and A4. This and the M20-32 are the only Momentum models with a throat that wide; everything else in the range is 9 inches.
Can it shred CDs and credit cards?
Yes, along with paper clips, staples and unopened junk mail. Feed discs one at a time. It will not take laminated pouches, adhesive labels, continuous form paper or cardboard, and a wide throat makes it tempting to try — do not.
How often will the 32-gallon bin need emptying?
Roughly every 700 to 1,000 sheets of cross-cut waste, though it varies a great deal with paper type and how the shred settles. For a floor of a dozen people that is usually a weekly job. The whole cabinet rolls on castors, which is the practical way to handle 32 gallons of paper waste rather than lifting it.
What is the duty cycle?
ACCO rates the Momentum range to run continuously until the bin is full rather than to a fixed on/off cycle, so the working limit here is the container rather than the motor. That is a genuine advantage over machines that stop for a cool-down after twenty or thirty minutes.
Is 26 sheets a realistic figure?
It is quoted on 20 lb paper, which is a fair basis rather than an optimistic one, and it assumes flat loose sheets fed square. Stapled sets, creased pages, coated stock and damp paper all reduce it, and the anti-jam sensor will decline an overload rather than attempt it. Plan around eighteen to twenty in routine use.
How loud is it?
ACCO does not publish a decibel figure for any Momentum model, so we have not printed one. The range is marketed as ultra-quiet. If a specific noise limit is part of your requirement — and in an open-plan office it often should be — ask us and we will get a measurement rather than repeat marketing language.
Is this NSA approved?
No. NSA/CSS 02-01 requires a 1 mm x 5 mm particle and requires the model to appear on the NSA Evaluated Products List. This machine is P-4 at roughly 4 x 30 mm and is not listed. TAA compliance is a country-of-origin rule and says nothing about security level, though the two are often confused in procurement documents.