
Before you specify
Frequently Asked Questions
Can it shred CDs, credit cards and staples?
Yes to all of them, plus paper clips and unopened junk mail — ACCO lists the full set for this model. Feed optical discs singly rather than in a stack. It will not take laminated pouches, adhesive labels, continuous form paper or cardboard, and those are the materials most likely to damage a cutting head.
How often will the 23-gallon bin need emptying?
Roughly every 500 to 800 sheets of cross-cut waste, with real variation depending on paper type and how the shred settles. For a department of eight or so on normal correspondence volumes that is usually a weekly job. The bin sits on castors, so moving the machine to a waste point is easier than carrying a container to it.
Will legal paper fit?
Yes. The 9-inch throat clears US legal at 8.5 inches and A4 at 8.27 inches with the sheet fed flat, so nothing has to be folded. Ledger at 11 inches and A3 at 11.7 inches will not fit; those need the 12-inch throat on the X26-32 or M20-32.
What is the duty cycle?
ACCO rates the Momentum range to run continuously until the waste bin is full rather than publishing a fixed on/off cycle. With a 23-gallon container that is a substantial working session. It is still sensible to let the machine rest after a long clear-out, as you would with any motor.
What bags fit it?
We cannot give you a part number with confidence, and would rather say so than guess. ACCO's published bag sizes are 6-8 gallon (1765016), 13-19 gallon (1765010), 30 gallon (1765015) and 35-60 gallon (1145482), and none of the compatibility lists names the X22-23. The 13-19 gallon bag is undersized for a 23-gallon bin and the 30 gallon may be loose. Ask us before ordering a case.
Is P-4 enough for personal data?
For most ordinary business records, yes — P-4 is the standard commercial level and a 4 x 35 mm particle is not reconstructable by hand in any practical sense. Where regulation, a client contract or an internal policy specifies P-5, it is not, and the M12-12 or M20-32 are the machines that answer that requirement in this range.
Is this NSA approved?
No. NSA/CSS 02-01 requires a maximum 1 mm x 5 mm particle and requires the specific model to be listed on the NSA Evaluated Products List. A P-4 super cross-cut meets neither condition, and no Momentum model is listed. TAA compliance, which this machine has, is a separate matter entirely.