GBC AutoFeed+ Large Office Shredder, 750X, Super Cross-Cut, P-4, 750 Sheets

The AutoFeed+ 750X is the biggest machine ACCO offers in this range, and the honest way to describe it is as a 600X with more room at both ends: 750 sheets in the hopper instead of 600, a 37-gallon bin instead of 29, and a twenty-sheet manual slot instead of fifteen.

What it does not give you is more time. The run time is the same four hours as the 600X, and the cabinet runs seven decibels louder at 62 dB. Choose the 750X when the constraint is how much paper you can put in and how often somebody has to empty the bin, not when it is how long the machine can run.

Key Features

• 750-sheet locking hopper, the largest in the AutoFeed+ range — a ream and a half in one load.
• Twenty-sheet manual feed slot, the most generous manual capacity here, which matters more than it sounds when someone wants to feed a thick file by hand.
• 37-gallon pull-out bin, roughly 28 percent more than the 600X.
• DIN 66399 P-4 at 5/32 x 1 3/16 in (about 4 x 30 mm, roughly 120 mm²).
• 240-minute run time, matching the 600X.
• Accepts staples and paper clips from the hopper; credit cards through the manual slot.
• Two-year onsite warranty.
• 21 x 23 x 42 in cabinet — the same floor area as the 600X, four inches taller.

A note on the word micro-cut. ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.

Specifications

ACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.

What's in the Box

Shredder with auto-feed hopper, 37-gallon pull-out bin and power cord. ACCO's 1765015 30-gallon shredder bag (25 per box) names the 750X on its compatibility list — note that the bag is rated smaller than the bin, which is normal for a liner. Shredder oil is part 1760049.

Who Should Buy This — and Who Should Not

Buy the 750X if your problem is trips to the bin. A 37-gallon container and a 750-sheet hopper are the largest combination in this range, and in a busy department that translates directly into fewer interruptions. The twenty-sheet manual slot is a genuine convenience for anyone who prefers feeding by hand.

Do not buy it for a quiet room. At 62 dB it is the loudest AutoFeed+ model and noticeably louder than the 55 dB 600X, which is otherwise a very similar machine; if it has to sit near desks, the 600X is the better neighbour. Do not buy it if you need P-5 — the AutoFeed+ 750M is the identical cabinet with a 2 x 15 mm head. And do not buy it expecting continuous duty: four hours is four hours, the same as on the 600X, and a machine that must run all day is a commercial cabinet such as the GBC CX34-44.