Before you specify
Frequently Asked Questions
Which HSM baler uses strapping twine 6201 993 000?
Only the HSM V-Press 60. HSM lists this twine against no other press. The V-Press 60 is a manual machine without a strapping head, so bales are tied by hand with twine.
Can I use this twine on a V-Press 403 or 503?
No. The V-Press 403 uses WG 20 polyester tape, part 6100 993 010, and the 503 uses WG 30 or WG 40. Those presses tension and seal tape mechanically, so twine will not work in them.
What is the breaking strength of HSM V-Press 60 twine?
HSM does not publish a tensile strength or diameter for this twine, so we cannot quote one. The published data covers the roll only: 200 m at 2 kg. For a compliance record, ask HSM directly using part number 6201 993 000.
How many bales will one roll of twine tie?
That depends on your bale size and the number of ties, and HSM gives no bale figure. Measure a finished bale's girth, multiply by the ties you use plus some extra for knots, and divide into 200 m.
Can I use farm baling twine in a V-Press 60?
It will physically work, since the V-Press 60 is tied by hand. Farm twine varies a lot in strength and stretch, though, and you lose HSM's specification. Staying with the HSM roll avoids disputes over warranty or with your bale collector.