intimus PB9 SHREDDER BAGS - PB9- 50CNT (14.95, 16.86)

PB9 is the industrial waste bag for the intimus 14.95 and 14.87, supplied as a case of 50. These are the largest machines in the intimus range that still line a container rather than bale directly, and the bag is sized accordingly.

Compatible Models

intimus North America's compatibility table for PB9 reads: 14.95, 14.87, 16.87. In our range that covers:

• intimus 14.95 industrial shredder (6 x 50 mm cross-cut, P-3)
• intimus 14.87 industrial shredder-baler (6 x 50 mm cross-cut, P-3)

One point of honesty on the 16.86. Our catalogue has historically listed PB9 against the 16.86 shredder-baler, while intimus's table names a 16.87. We have not been able to confirm whether these are the same designation recorded two ways or two distinct machines, so we are not going to assert that PB9 fits a 16.86. If that is your machine, contact us with the serial plate and we will get it confirmed before you order.

Not for the 16.50 — intimus states directly on this part's page that 16.50 series shredders use PB7.

Specifications

On a 14.87 the baling press handles the bulk of the output, so bag consumption is lower than the machine's raw throughput would suggest. On a standalone 14.95 it is the other way round — everything the machine shreds ends up in a lined container, and bags are the limiting consumable.

Both machines are 6 x 50 mm cross-cut heads rated P-3 under DIN 66399, which produces a coarse, bulky particle compared with an office P-4 or P-5 machine. That matters for planning: bulky waste fills a container by volume long before it becomes heavy, so on these machines you are usually changing bags because the container is full rather than because it has become difficult to lift.

Order a case at a time and reorder at around ten remaining. Industrial bag parts move less quickly through the supply chain than the office sizes, so a same-week delivery is not something to count on.