
Before you specify
Frequently Asked Questions
How much faster is this than the B32 in the same cut?
About 20 percent more sheets per pass - 30 to 32 against the B32's 25 to 27 - and a 700 W motor rather than 610 W, which means it holds that rate more consistently under continuous feeding. The bigger practical difference is the bin: 100 litres against 82, so someone interrupts the job to empty it less often.
Is the feed opening wider than the B32's?
No. Both machines have a 310 mm throat. The B34 is a larger cabinet - 541 x 439 x 845 mm against the B32's 497 x 398 x 793 mm - but the intake width is identical. If your reason for considering the B34 was fitting wider documents, it will not solve that.
Will tabloid or ledger paper fit?
Yes, fed short edge first. Tabloid is 11 inches on the short edge and the throat is 12.2 inches. Legal at 8.5 inches fits easily. Anything whose leading edge exceeds 12.2 inches has to be folded or cut, and folding doubles the effective thickness against the sheet capacity.
Can it shred CDs and credit cards?
Yes. HSM rates this model O-2 for optical media and T-2 for data carriers alongside P-2 for paper. Feed discs and cards singly rather than mixed with paper. Remember the destruction is coarse at these levels - fine for expired access cards and old software media, not for anything carrying live account data.
Does it need oiling?
No. HSM's oiling requirement applies to cross-cut and micro-cut heads. A 5.8 mm strip cut on this chassis is not on that schedule, which is part of why the strip-cut models are cheaper to run. There is no automatic-oiler version of this variant.
How many people can share it?
Comfortably a floor of twenty-five to forty in a normal office, more if usage is bursty rather than constant. The constraint is bin emptying rather than the cutting head: 658 sheets of strip waste fills 100 litres, so a heavy-volume records team will still be emptying it several times a week.
What is covered by the lifetime warranty?
HSM's lifetime warranty applies to the induction-hardened solid steel cutting rollers, and covers security levels P-2 to P-5 - so this machine qualifies. It does not extend to the motor, electronics or cabinet, which fall under the standard machine warranty. We were unable to verify that standard term for the US market from HSM's own documentation.