HSM Pure 630 1/4 Inch Strip Cut Document Shredder - HSM2361

The HSM Pure 630 strip cut is a large-office floor shredder that cuts paper into 5.8 mm strips at DIN 66399 P-2 and takes 35-37 sheets per pass on 80 g/m² paper. Driven by a 700 W motor with a 12.2 in (310 mm) intake and a 34.3-gallon (130-liter) bin, it is a high-throughput machine for departments that destroy large volumes of routine, non-sensitive paper.

Pure 630 strip cut at a glance

• 35-37 sheets per pass at 80 g/m², or 40-42 at 70 g/m²
• P-2 strip cut, classified E-2 | O-2 | P-2 | T-2
• 700 W motor designed for continuous running
• 130-liter bin on a floor cabinet with castors
• Accepts CDs, DVDs, credit cards and floppy disks

Throughput first: what the strip head buys you

The 630 chassis comes with a strip head or a particle head, and the difference is stark. Cutting strips takes far less work per sheet than cutting particles, so this version handles 35-37 sheets where the cross cut manages 20-22. For a department feeding superseded drafts, internal printouts and mail by the tray, that means a stack clears in minutes. The two capacity figures HSM publishes describe different paper weights; plan around the 80 g/m² number for typical 20 lb copier stock.

The design is meant to keep running rather than stopping for cool-down breaks. Overload protection reverses the rollers when a stack is too thick, and a sensor handles start and stop.

The trade-off at P-2

A 5.8 mm (0.228 in) strip, sold as 1/4 in, sits at P-2, a classification for general documents. Text along each strip remains legible, so most privacy policies call for P-4 or above on anything that identifies a person. Treat this machine as a housekeeping tool for routine paper, and send sensitive records to a P-4 shredder.

Bin, bags and maintenance

Strip waste is bulky, so the 130-liter bin fills after roughly 1,085 to 1,170 sheets, sooner than the same bin behind a particle head. It ships with a removable collecting-bag frame; bags are not included, so match a liner to the 130-liter volume. Strip heads need less oil than particle heads but still benefit from periodic lubrication with shredder oil or oil sheets. The induction-hardened steel rollers carry HSM's lifetime warranty.

HSM Pure 630 strip cut specifications

Pure 630 strip cut against close alternatives

• Pure 630 4.5 x 30 mm cross cut: same cabinet and bin at P-4, with 20-22 sheets per pass.
• Pure 740 strip cut: the same 5.8 mm strip and 35-37 sheets with a wider 400 mm feed and a 145-liter bin.
• Pure 530 strip cut: 25-27 sheets with a 610 W motor and an 80-liter bin in a smaller cabinet.

Who should consider the Pure 630 strip cut

It fits a department that produces large amounts of everyday paper and keeps confidential records on a separate P-4 shredder. If personal data could reach it, buy the P-4 Pure 630 instead; one secure machine is usually wiser than a fast P-2 unit and a habit of feeding it the wrong paper.