
Before you specify
Frequently Asked Questions
How many people can share this shredder?
Realistically a whole floor. At 37 to 39 sheets per pass on a continuous-duty 2.125 HP motor with a 37-gallon bin, the machine is rarely the limiting factor for a department of fifty or more doing normal volumes. The practical constraint tends to be walking distance and bin emptying rather than cutter throughput.
Can it shred CDs, DVDs and credit cards?
Yes. MBM specifies the 4 x 40 mm cross-cut models for the most common CDs and DVDs, and the hardened shafts also take staples, paper clips and credit cards. Feed discs individually. If you later switch this machine to a finer cut, be aware the P-5 configuration loses optical media capability.
Is P-4 enough, or should we specify the P-5 version?
P-4 at 160 mm² is the level most US organisations use for personnel, medical and financial records, and it is normally sufficient unless something in writing says otherwise. Move to the DSH0368L at P-5 when a client contract, agency requirement or internal risk assessment names that level. Do not pay the throughput penalty of P-5 speculatively — check the wording that binds you first.
What is the duty cycle before it needs to cool down?
MBM rates the single-phase motor for continuous operation, so there is no published cool-down interval for ordinary office use. The machine also carries thermal protection that will cut power if it is genuinely overworked. In practice, jams caused by overfeeding are far more common than thermal cut-outs — which is what the ECC indicator is there to prevent.
What does the automatic oiler cost to run?
Oil is bought separately in six-quart bottles and consumption depends entirely on how much you shred. For most departmental users a bottle lasts a long time. Budget for it as a recurring consumable, and note that the 3104 and 4001 have no oiler at all if oil-free running is a procurement requirement.
How is it delivered and installed?
It ships at around 324 lb on a pallet. The cabinet is on casters, so once it is at floor level it rolls into place, but unloading and threshold crossings need equipment and two people. It also needs a 115 V, 20 amp dedicated line at the final location. Confirm both the delivery route and the circuit before scheduling.