
Before you specify
Frequently Asked Questions
Is the intimus 60 CP7 NSA approved?
We cannot confirm that, and we will not claim it. A P-7 rating on its own does not make a machine NSA approved. NSA/CSS 02-01 requires both a maximum 1 mm x 5 mm particle and the specific model appearing on the NSA Evaluated Products List. The 60 CP7's 0.8 x 4.5 mm cut satisfies the particle requirement, but listing is a separate matter that only the current NSA EPL can settle. If your procurement depends on it, check the live NSA Evaluated Products List for this exact model number before you order, or contact us and we will confirm in writing.
Why does it only take five sheets when the 60 CP4 takes seventeen?
Because the cut is roughly thirty times finer by area. The CP4 produces a 114 mm2 particle; the CP7 produces 3.6 mm2. The same 395 W motor has to drive many more cutting edges through the same stack, so capacity falls. Five sheets at 80 g/m2 is normal for a P-7 machine of this size - if anything it is competitive. Feed it steadily in small stacks and it will run all day; force it and you will spend your time in reverse.
Can it destroy CDs, USB sticks or credit cards?
No. intimus rates the 60 CP7 for paper with staples and for foil only. Optical discs, plastic cards and electronic media are not approved for this machine and feeding them risks the cutting head. Destroy optical media and cards on a machine rated for them, and destroy SSDs, phones and USB devices on a dedicated electronic media shredder such as the intimus FlashEx, which is built for exactly that and rated E-3 under the same standard.
How often will the bin need emptying?
Less often than you would expect. P-7 waste is close to a powder and packs very densely, so the 60-litre bin holds around 2,100 sheets - about seventy percent more sheet-equivalent than the P-4 model in the same cabinet. In a secure office destroying a few hundred pages a week, that is a bin change every two to three weeks. Do not run past the bin-full indicator; compacted P-7 waste at the base of the cutting head is difficult to clear.
Does it still fit US Legal paper?
Yes. The feed opening is the full 235 mm (9.25 in) used across the 60 series, so US Letter at 8.5 in and US Legal at 8.5 x 14 in both feed short-edge first with no folding. That is unusual at this security level - many P-7 machines use a narrower throat. Tabloid at 11 in wide will not fit and would have to be folded, which at five sheets per pass leaves you very little headroom.
What warranty does it carry, and why is it shorter than the CP4's?
intimus North America places high-security shredders in a separate warranty class: one year parts, 90 days labour, and one year on the cutting cylinders. The commercial models in the same 60 series - the CP4 and CP5 - get two years parts plus a lifetime limited warranty against cutting-cylinder fracture. The difference reflects how hard a P-7 head works. Budget for it: the cutting cylinder is the expensive component on any high-security shredder.
How much maintenance does a P-7 head need?
More than a P-4 head. Oil the cutting cylinders every time you empty the bin, and after roughly 20 to 30 minutes of continuous running if you are working through a large batch. Use proper shredder oil across the full width of the throat and run a reverse cycle to distribute it. Skipping this is the single most common reason a high-security shredder loses capacity and starts jamming on three sheets when it should manage five.