{"product_id":"hsm-v-press-860-plus-vertical-bailing-press","title":"HSM V-Press 860 Plus Vertical Bailing Press","description":"\u003cp\u003eThe one thing that separates the HSM V-Press 860 plus from the 860 eco below it is that its upper door half pushes down and opens itself when the pressing cycle finishes. On a machine that gets cycled a handful of times a day that is a convenience. On a machine that gets cycled all shift by staff who are also picking, receiving and stocking, it is the difference between a baler people use and a baler people walk past with an armful of cardboard.\u003c\/p\u003e\u003cp\u003eEverything else is the big-chassis V-Press: 594 kN of pressing force, a 1,195 x 650 mm loading aperture, four-fold wire tying and a bale of up to 480 kg that a mill will take at a full-bale price. It handles cardboard, mixed paper and plastic film. Compared with the eco it is deeper — 1,579 mm against 1,363 mm — and 130 kg heavier in the frame, which is the cost of the door mechanism.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-assisted upper door.\u003c\/strong\u003e The upper half of the door is pushed down and opens automatically after compression, so the operator is not waiting at the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame aperture and bale as the eco\u003c\/strong\u003e, so the two models are interchangeable from a materials-handling point of view — same forklift, same bale stack, same wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes mixed paper\u003c\/strong\u003e in addition to OCC and film, unlike the plus B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e594 kN of pressing force\u003c\/strong\u003e from a 4.8 kW motor. HSM prints this as \"60 t\" on its US pages; that is the force divided by gravity, not a weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHSM TCS (Torsion Control System)\u003c\/strong\u003e monitors the press ram for twist. A ram that starts to skew in the chamber is the usual cause of expensive frame damage on vertical balers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRapid stroke technology\u003c\/strong\u003e runs the ram fast through free air and slows it only when it meets resistance, which is where the 25 second idle cycle comes from.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start after door close\u003c\/strong\u003e, so the operator loads, shuts the door and walks away. No two-hand start button to hold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand wheel door lock with counter-rotating thread\u003c\/strong\u003e — one turn locks or releases both sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMembrane keypad with text display\u003c\/strong\u003e reporting machine state and faults in words rather than blink codes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-fold wire tying\u003c\/strong\u003e as standard. A polyester tape station is available as an option.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine type\u003c\/th\u003e\n\u003ctd\u003eVertical baling press, manually loaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePressing force\u003c\/th\u003e\n\u003ctd\u003e594 kN (quoted by HSM as 60 t)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive motor\u003c\/th\u003e\n\u003ctd\u003e6.44 HP (4.8 kW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e480 V \/ 60 Hz, three phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCycle time\u003c\/th\u003e\n\u003ctd\u003e25 s (idle, theoretical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHourly output\u003c\/th\u003e\n\u003ctd\u003e1–2 bales per hour in practice (HSM figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoading aperture (W x H)\u003c\/th\u003e\n\u003ctd\u003e47.05 x 25.59 in (1,195 x 650 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBale size (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e1,200 x 780 x max. 1,200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBale weight\u003c\/th\u003e\n\u003ctd\u003eup to 1,058 lb (480 kg), material dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBale tying\u003c\/th\u003e\n\u003ctd\u003e4-fold with wire; polyester tape optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 62.9 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e68.94 x 62.17 x 117.52 in (1,751 x 1,579 x 2,985 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e4,475 lb (2,030 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMinimum ceiling height\u003c\/th\u003e\n\u003ctd\u003e118 in (3,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eCardboard, mixed paper, plastic film\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eHSM publishes no scope-of-delivery list for this range. What is certain: the press arrives assembled and skidded with its operating instructions, and it needs rigging into position and a three-phase 480 V connection made by an electrician.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWire is not included.\u003c\/strong\u003e The 860 plus ties with 2.8 x 3,700 mm pre-looped wire, HSM part 6135 993 002. The polyester tape alternative (WG 55, part 6514 993 000) only works if the optional tape station was specified with the machine.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBuy the 860 plus if\u003c\/strong\u003e the baler is going to be used many times a day by people whose main job is something else. The self-opening door is a small mechanical feature with a disproportionate effect on whether a baler actually gets used, and that is what you are paying the premium over the eco for.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy the 860 eco instead if\u003c\/strong\u003e baling happens in scheduled batches and one person stays with the machine while it runs. The eco presses identically, ties identically and makes the same bale, in a chassis 216 mm shallower and 130 kg lighter. If floor depth is tight, the eco is the better fit on that ground alone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuy the 860 plus B instead if\u003c\/strong\u003e your material is bulky film or oversized cartons that will not go through a 1,195 mm aperture without being cut down first. The plus B opens to 1,500 mm and bales to 550 kg. It is listed by HSM for cardboard and film only, so if mixed office paper is a significant part of your stream, stay with this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLook at a channel baler instead if\u003c\/strong\u003e you are already feeding the baler from a conveyor or a shredder discharge. The V-Press is a manual machine by design; automating the feed into it does not make it an automatic baler. The VK 2306 is the smallest HSM channel press and starts where the V-Press range stops.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751944499264,"sku":"6148213","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/HSM_V_Press_860_plus_P3_JPG_1280x1280_2329fb0d-0536-47df-9d40-c34352d0412d.jpg?v=1759518955","url":"https:\/\/shreddermaster.com\/products\/hsm-v-press-860-plus-vertical-bailing-press","provider":"Shredder Master","version":"1.0","type":"link"}