{"product_id":"hsm-v-press-825-plus-pro-vertical-bailing-press","title":"HSM V-Press 825 Plus Pro Vertical Bailing Press","description":"\u003cp\u003eThe V-Press 825 plus pro is the heavier-built version of HSM's most space-efficient vertical baler. It presses at \u003cstrong\u003e250 kN\u003c\/strong\u003e into a compact chamber, producing a dense bale of up to \u003cstrong\u003e280 kg\u003c\/strong\u003e from a machine only \u003cstrong\u003e2370 mm tall\u003c\/strong\u003e — the lowest press in this comparison, and the one most likely to fit a standard commercial unit without a survey argument about the roof.\u003c\/p\u003e\n\u003cp\u003eAgainst the standard 825 plus, HSM's published data shows three measurable differences: the loading aperture is 10 mm taller (540 mm against 530), the machine is 202 mm deeper, and it weighs 140 kg more at 1210 kg. Pressing force, bale size and bale weight are the same. HSM does not publish a feature list explaining what the extra depth and mass deliver, and we are not going to invent one — ask us and we will get it confirmed.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 kN pressing force\u003c\/strong\u003e — 40% more than the V-Press 820 plus, from a machine that is 129 mm shorter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBales of up to 280 kg\u003c\/strong\u003e in a 1200 × max. 700 × 780 mm format: dense, well-shaped and stackable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2370 mm overall height,\u003c\/strong\u003e the lowest of HSM's vertical presses in this range and a genuine advantage in a low-ceiling bay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1195 × 540 mm loading aperture,\u003c\/strong\u003e 10 mm taller than the standard 825 plus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-fold polyester tape strapping\u003c\/strong\u003e — no wire, no special tooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1210 kg reinforced frame,\u003c\/strong\u003e 140 kg more machine than the standard 825 plus on the same press specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.8 kW three-phase drive\u003c\/strong\u003e at 480 V \/ 60 Hz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine type\u003c\/th\u003e\n\u003ctd\u003eVertical baling press\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePressing force\u003c\/th\u003e\n\u003ctd\u003e250 kN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBale size\u003c\/th\u003e\n\u003ctd\u003e1200 × max. 700 × 780 mm (47.2 × 27.6 × 30.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum bale weight\u003c\/th\u003e\n\u003ctd\u003e280 kg (617 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoading aperture\u003c\/th\u003e\n\u003ctd\u003e1195 × 540 mm, W × H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive power\u003c\/th\u003e\n\u003ctd\u003e4.8 kW (6.44 hp) at 60 Hz. HSM rates the equivalent 400 V \/ 50 Hz article at 4 kW; the difference is the frequency, not a different motor.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e480 V \/ 60 Hz, three-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e1709 × 1248 × 2370 mm (67.28 × 49.13 × 93.31 in), W × D × H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003e1210 kg (2,668 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStrapping\u003c\/th\u003e\n\u003ctd\u003eFour-fold polyester tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterials\u003c\/th\u003e\n\u003ctd\u003eCardboard, plastic film, mixed paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eHSM publishes no noise rating for this machine and none is quoted here. The specific pressing pressure figure HSM gives for the standard 825 plus is 26 N\/cm²; we have not seen a separately published figure for the pro and so have not repeated it.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe press. Polyester strapping tape is a consumable and is bought separately, as is the three-phase electrical connection and any handling equipment for finished bales. HSM does not publish a packing list for this machine.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe case for the 825 family is density per square metre and per metre of height. At 250 kN into a 700 mm bale chamber, this press makes a heavier bale than the physically larger V-Press 820 plus while standing 129 mm lower. For a retail back-of-house, a hospital loading bay, a basement goods area or any building where the ceiling is fixed and low, that is decisive. The pro adds a heavier frame on top of that, which suits a site running the press hard all day.\u003c\/p\u003e\n\u003cp\u003eWhether it is worth the premium over the \u003ca href=\"\/products\/hsm-v-press-825-plus-vertical-bailing-press\"\u003estandard 825 plus\u003c\/a\u003e is a fair question, and the honest answer is that the published data does not settle it: same 250 kN, same 280 kg bale, same height. You are buying 140 kg more machine and 202 mm more depth. If your press will be lightly used, the standard version is the sensible buy and the smaller footprint is a bonus.\u003c\/p\u003e\n\u003cp\u003eLook elsewhere if bale grade drives your economics. A 280 kg bale is a handling bale; the \u003ca href=\"\/products\/hsm-v-press-1160-plus-vertical-bailing-press\"\u003eV-Press 1160 plus\u003c\/a\u003e at 594 kN makes a 550 kg mill bale, if you have 2985 mm of height for it. And if your material is bulky rather than heavy — large part-flattened cartons, light film — the \u003ca href=\"\/products\/hsm-v-press-820-plus-vertical-baling-press-hsm6143\"\u003eV-Press 820 plus\u003c\/a\u003e has a taller aperture and a wider bale face, and is easier to load even though it presses less hard.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751944433728,"sku":"6152313","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/HSM_V_Press_825_plus_pro_P1_JPG_1280x1280_017ad4fc-1c91-4aad-8cbf-ba49f12e2949.jpg?v=1759518884","url":"https:\/\/shreddermaster.com\/products\/hsm-v-press-825-plus-pro-vertical-bailing-press","provider":"Shredder Master","version":"1.0","type":"link"}