{"product_id":"hsm-powerline-450-2-1-16-x-5-8-industrial-shredder","title":"HSM Powerline 450.2 - 1\/16 x 5\/8 Industrial Shredder","description":"\u003cp\u003eThis is the highest security level HSM offers in the Powerline range: a 2 x 15 mm cut rated DIN 66399 \u003cstrong\u003eP-5\u003c\/strong\u003e, in a continuous-duty industrial cabinet that still fits in a 752 x 668 mm footprint. Buy it when a policy names P-5 and the volume is too high for an office machine to cope.\u003c\/p\u003e\n\u003cp\u003eBe clear-eyed about the trade. P-5 caps particle area at 30 mm², and a 2 x 15 mm particle is exactly 30 mm² — it sits precisely on the boundary of the band, not comfortably inside it. Getting there costs throughput: 28 to 32 sheets a pass, against 65 to 70 for the P-4 version of the same cabinet. You are paying roughly half your sheet rate for one security level. That is the correct decision when the requirement is real and a poor one when it is assumed.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 x 15 mm particle cut, DIN P-5.\u003c\/strong\u003e Full multi-media rating E-4|F-2|O-4|P-5|T-5, covering electronic, film, optical and paper media at the level above ordinary personal-data destruction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e443 mm (17.4\") intake.\u003c\/strong\u003e Unchanged from the P-4 version and wider than HSM's much larger FA 400.2, so legal, A4 and A3 all feed unfolded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty motor.\u003c\/strong\u003e P-5 shredding is slow work; a machine that has to rest between batches makes it slower still. This one does not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e290 litre roll-out container.\u003c\/strong\u003e The finer cut means the shred settles denser, so the sheet count per bin is higher than the raw volume suggests.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid steel cutting rollers.\u003c\/strong\u003e Staples and paper clips are handled without pre-sorting, which is unusual at P-5 and is one of the practical reasons to buy this over a small high-security office shredder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximately 58 dB(A) at idle\u003c\/strong\u003e and 220 kg, so it can be sited near the people who use it and moved without lifting equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 \/ ISO\/IEC 21964 \u003cstrong\u003eP-5\u003c\/strong\u003e (full rating E-4|F-2|O-4|P-5|T-5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro cut (particle cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e2 x 15 mm (approx. 1\/16\" x 5\/8\") — 30 mm², exactly the P-5 limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e28 to 32 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIntake width\u003c\/th\u003e\n\u003ctd\u003e17.4\" (443 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContainer volume\u003c\/th\u003e\n\u003ctd\u003e76.6 US gal (290 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003eThree-phase supply. HSM rates the EU article at 400 V \/ 50 Hz; confirm the 60 Hz configuration for your site before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 58 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e29.6\" x 26.3\" x 57.9\" (752 x 668 x 1471 mm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e485 lb (220 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eMetric values are HSM's published figures for the equivalent EU article; imperial values are converted from them. Sheet capacity is stated at 80 g\/m², the paper weight HSM uses on its per-model datasheets. HSM's overview brochure rates the same machines at 70 g\/m², which produces figures roughly 15% higher — check which weight a competing quote is using before you compare.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowerline 450.2 shredder in 2 x 15 mm, assembled and mobile\u003c\/li\u003e\n\u003cli\u003eRemovable 290 litre waste container\u003c\/li\u003e\n\u003cli\u003eOperating instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBags and cutting oil are \u003cstrong\u003enot included\u003c\/strong\u003e. Lubrication matters more at P-5 than at any coarser cut, because a finer cutting head runs hotter and loads up faster; budget for HSM's specified cutting oil rather than a generic substitute.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy this if a written policy, a client contract or a regulator names P-5 and you shred more than an office machine can absorb. Defence contractors handling commercially sensitive but unclassified material, research organisations, pharmaceutical firms destroying trial documentation, and financial institutions with special-category data requirements are the typical buyers. The combination of P-5 and genuine continuous duty is not widely available; most P-5 machines are small office units with a stated rest cycle.\u003c\/p\u003e\n\u003cp\u003eDo not buy it because P-5 sounds safer than P-4. If your requirement is ordinary personal data, the \u003ca href=\"\/products\/hsm-powerline-450-2-1-8-x-1-1-2-industrial-shredder-hsm1503\"\u003eP-4 version of this same cabinet\u003c\/a\u003e gives you more than double the sheet rate for the same footprint and the same money profile, and P-4 is what nearly every data-protection policy actually specifies. Halving your throughput for a level nobody asked for is a real operational cost.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for high-volume archive clearance either. At 28–32 sheets a pass into a 290 litre bin, a pallet of files is a long afternoon. If you need both P-4-and-above security and industrial volume, the \u003ca href=\"\/products\/hsm-powerline-fa-400-2-1-8-x-1-1-2-industrial-shredder\"\u003eFA 400.2 at P-4\u003c\/a\u003e with its 460 litre container and 80-sheet rate is the more honest recommendation — you cannot have P-5 and archive throughput in this range.\u003c\/p\u003e\n\u003cp\u003eOne further point on warranty worth raising before you order: HSM's lifetime cutting-roller cover is documented for certain cut classes rather than universally, and we have not been able to confirm from HSM's own documentation whether the 2 x 15 mm Powerline head is inside or outside that cover. Ask us to confirm it in writing before purchase rather than assuming it carries over from the P-4 model.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751942860864,"sku":"1688147","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/HSM_Powerline_450-2_P-4_P1_JPG_1280x1280_373e376a-5139-4dc8-a737-1ea1a89cc500.jpg?v=1759518064","url":"https:\/\/shreddermaster.com\/products\/hsm-powerline-450-2-1-16-x-5-8-industrial-shredder","provider":"Shredder Master","version":"1.0","type":"link"}