{"title":"Personal \u0026 Small Office Shredders","description":"\u003cp\u003eThese are the machines that live beside a desk or under it: compact, single-phase, and priced for a single user or a small team. The specifications that decide the purchase are sheet capacity, bin size and duty cycle — in that order.\u003c\/p\u003e\n\u003cp\u003eManual-feed models here run from around 6 to 20 sheets per pass with bins of roughly 4 to 10 gallons. The HSM SECURIO C-series covers P-2 strip-cut through P-5 micro-cut in the same footprint; Kobra's +1 and +2 range and the Fellowes Powershred line cover similar ground at P-4. Auto-feed models — the GBC AutoFeed+ and Fellowes AutoMax families — take a stack of 150 to 300 sheets in a closing tray and work through it unattended, which changes the economics if shredding is a chore nobody gets round to.\u003c\/p\u003e\n\u003cp\u003eTwo things catch people out at this size. Duty cycles are short, often ten minutes of running to thirty minutes of cooling, so a machine bought for occasional use will trip its thermal cut-out if pressed into daily service. And a small bin at P-5 fills fast, because finer particles pack less densely. If more than five people will use the machine, start at \u003ca href=\"\/collections\/medium-office-shredders\"\u003emedium office shredders\u003c\/a\u003e instead. See also \u003ca href=\"\/collections\/autofeed-shredders\"\u003eauto-feed models\u003c\/a\u003e and the \u003ca href=\"\/pages\/specifications\"\u003especifications reference\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"kobra-1-cc4","title":"Kobra +1 CC4","description":"\u003cp\u003eThe Kobra +1 CC4 is the cross-cut member of Kobra's +1 deskside range: same 230 mm throat and same 38.5-litre bagless bin as its strip-cut siblings, but it reduces paper to a 3.5 x 40 mm particle for a DIN 66399 P-4 rating. That is the level most US offices land on for routine personnel files, invoices and customer records, and it is the reason to pick the CC4 over the cheaper +1 SS4. The trade is throughput: cross cutting costs you five sheets a pass compared with the SS4.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon bin.\u003c\/strong\u003e The bin pulls out without lifting the cutting head, and a transparent front window shows the fill level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 cross cut.\u003c\/strong\u003e A 140 mm² particle - well inside the 160 mm² DIN ceiling for P-4, and roughly ten times harder to reassemble than a 3.8 mm strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (full rating P-4 T-4 E-3 F-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.5 x 40 mm (1\/8 x 1 5\/8 in) - 140 mm² particle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12-14 sheets at 70 g\/m²; 10-12 sheets at 80 g\/m² (US 20 lb bond sits between the two)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres), bagless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, films\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder arrives as one assembled unit with its pull-out 10.2-gallon bin fitted and a power cord. Waste bags are neither required nor supplied: Kobra designed this cabinet to be tipped straight into a recycling container, and the front window shows the fill level so you are not opening it to guess. Nothing needs assembly beyond unboxing and plugging in.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy the +1 CC4 if one person or a small shared workstation needs genuine P-4 destruction and the daily volume is a folder or two rather than a filing cabinet. It suits a home office, a practice manager's desk, or a consulting room where records are confidential but not classified.\u003c\/p\u003e\u003cp\u003eDo not buy it if you feed it thick stacks all afternoon - 12-14 sheets a pass on a 250 W motor is genuinely deskside duty, and the 240 C4 doubles the motor and adds a steel chain drive for that work. Skip it too if you need to destroy CDs or plastic cards regularly: the +1 CC4 has one throat, while the \u003cstrong\u003eKobra +2 CC2\u003c\/strong\u003e and \u003cstrong\u003e+3 CC4\u003c\/strong\u003e add a separate 125 mm media slot and a second bin. And if a compliance officer has specified P-5, the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e is the same cabinet at 1.9 x 13 mm, at the cost of dropping to seven or eight sheets a pass.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370510912,"sku":"Kobra +1 CC4","price":347.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/76793dce-bb1b-486e-8ea0-3e147c65b5fa_43a2335e-2ed9-4546-86c1-2a77e3952925.jpg?v=1754951554"},{"product_id":"kobra-1-ss4","title":"Kobra +1 SS4","description":"\u003cp\u003eVolume, not secrecy, is what the Kobra +1 SS4 is built for. It cuts 3.8 mm strips at a DIN 66399 P-2 rating and takes 17-19 sheets a pass - five more than the cross-cut +1 CC4 in the same cabinet - which makes it the right choice for high-turnover, low-sensitivity paper: delivery notes, duplicate print runs, marketing returns, expired schedules. If the paper contains personal data, buy a cross-cut model instead; P-2 strips are reconstructable with effort.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon bin.\u003c\/strong\u003e The bin pulls out without lifting the cutting head, and a transparent front window shows the fill level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighest sheet capacity in the +1 cross-cut range.\u003c\/strong\u003e 17-19 sheets a pass at 70 g\/m² means fewer stops when you are clearing bulk paper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (full rating P-2 O-2 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.8 mm strips (1\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e17-19 sheets at 70 g\/m²; 15-17 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres), bagless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e24 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray discs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder arrives as one assembled unit with its pull-out 10.2-gallon bin fitted and a power cord. Waste bags are neither required nor supplied: Kobra designed this cabinet to be tipped straight into a recycling container, and the front window shows the fill level so you are not opening it to guess. Nothing needs assembly beyond unboxing and plugging in.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThe +1 SS4 makes sense where the paper is bulky and the content is routine - a print room, a warehouse office, a school admin desk clearing old worksheets. It is also the quietest way to get volume out of a 250 W deskside machine, at 55 dB(A).\u003c\/p\u003e\u003cp\u003eDo not buy it for anything covered by HIPAA, GLBA or state breach-notification law. P-2 is the second-lowest DIN level and a 3.8 mm strip preserves whole words and full lines of text. For personnel or patient records step to the \u003cstrong\u003eKobra +1 CC4\u003c\/strong\u003e at P-4, or the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e at P-5. If you want even more throughput and do not care about security at all, the \u003cstrong\u003e+1 SS7\u003c\/strong\u003e takes 25-27 sheets at P-1.\u003c\/p\u003e\u003cp\u003eOne practical point about running costs: this machine has none. There are no bags to buy, no cartridges and no published oiling schedule, and the Energy Smart standby means it draws almost nothing between jobs. Over a three-year life that matters more than the purchase price difference between the SS4 and its cross-cut sibling, and it is the main reason the bagless Kobra deskside cabinet tends to outlast cheaper machines that depend on a supply of liners.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370543680,"sku":"Kobra +1 SS4","price":314.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/93bf4c0a-5d6e-422d-b45f-d968ef60ded2_d768ba46-84fe-4776-b2e4-e24e68075d7c.jpg?v=1754951557"},{"product_id":"kobra-1-ss7","title":"Kobra +1 SS7","description":"\u003cp\u003eThe Kobra +1 SS7 is the fastest and least secure machine in the +1 family: a 7.5 mm strip cut, DIN 66399 P-1, and 25-27 sheets in a single pass. Buy it for the throughput and nothing else. It exists for the office that destroys large quantities of paper nobody would want - superseded drawings, duplicate reports, old catalogues - and wants it gone quickly and quietly rather than irreversibly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon bin.\u003c\/strong\u003e The bin pulls out without lifting the cutting head, and a transparent front window shows the fill level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-27 sheets per pass.\u003c\/strong\u003e Roughly double the cross-cut +1 CC4 in the same cabinet, because a 7.5 mm strip asks very little of the 250 W motor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-1 (full rating P-1 O-1 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e7.5 mm strips (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e25-27 sheets at 70 g\/m²; 22-24 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres), bagless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e24 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray discs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder arrives as one assembled unit with its pull-out 10.2-gallon bin fitted and a power cord. Waste bags are neither required nor supplied: Kobra designed this cabinet to be tipped straight into a recycling container, and the front window shows the fill level so you are not opening it to guess. Nothing needs assembly beyond unboxing and plugging in.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the right machine for bulk disposal where confidentiality is not the point: print-room overruns, obsolete manuals, internal drafts. It is also the gentlest on the motor of any +1, so it is a reasonable choice for someone who shreds a lot but infrequently checks on maintenance.\u003c\/p\u003e\u003cp\u003eDo not buy it for anything with a name or a number on it. A 7.5 mm strip leaves whole sentences legible, and P-1 is the lowest level in the standard - it is not defensible under any US privacy regime. If that describes even part of your paper, buy the \u003cstrong\u003eKobra +1 CC4\u003c\/strong\u003e (P-4) or the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e (P-5) instead, and accept the lower sheet count. If you want a middle ground on speed, the \u003cstrong\u003e+1 SS4\u003c\/strong\u003e gives 17-19 sheets at P-2.\u003c\/p\u003e\u003cp\u003eA note on placement. The +1 SS7 is 15.6 in wide and 23.6 in tall with no castors, so it is designed to live under a desk or beside a printer rather than to be moved between rooms. At 24 lb it is a comfortable one-person lift when it needs to go somewhere, but the bin must be emptied first - with 38.5 litres of loose strip shred inside, the weight and the mess both work against you.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370576448,"sku":"Kobra +1 SS7","price":334.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/37277f51-2891-4731-af62-0abeb2102228_d521993a-4aeb-4dbc-ab72-926df2e02717.jpg?v=1754951559"},{"product_id":"kobra-2-cc2","title":"kobra +2 CC2","description":"\u003cp\u003eThe Kobra +2 CC2 is the highest security level available in Kobra's deskside cabinet: a 1.9 x 13 mm micro cut, 24.7 mm² per particle, rated DIN 66399 P-5. It also has the feature that defines the whole +2 series - a second 125 mm slot with its own 1.5-litre bin, so discs and plastic cards are destroyed without contaminating the paper recycling. What you give up is speed: 7-8 sheets a pass, the lowest in this range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro cut at 1.9 x 13 mm.\u003c\/strong\u003e 24.7 mm² per particle, comfortably inside the 30 mm² DIN limit for P-5 and about six times finer than the P-4 cross cut in the +1 CC4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo throats, two bins.\u003c\/strong\u003e A 230 mm paper throat over the 38.5-litre bin and a 125 mm media slot over a separate 1.5-litre plastics bin, so shredded discs and cards stay out of the paper waste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon paper bin.\u003c\/strong\u003e Pulls out without lifting the cutting head; a transparent window shows the level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-5 (full rating P-5 T-5 E-4 F-2; O-1 T-2 E-2 for the media slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1.9 x 13 mm - 24.7 mm² particle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e7-8 sheets at 70 g\/m²; 5-7 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm) paper, plus a separate 5.0 in (125 mm) CD\/DVD slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres) paper, plus 0.4 gallon (1.5 litres) plastics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e53-55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e30 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, films (paper throat); credit cards, chip cards, CDs\/DVDs\/Blu-ray discs (media slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled: cutting head, 10.2-gallon paper bin, 0.4-gallon plastics bin and power cord. No waste bags are included and none are needed - both bins empty directly. Keep the two bins separate at emptying time if you want the plastic shreds kept out of the paper recycling.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eChoose the +2 CC2 when the requirement is written down: a P-5 specification from an auditor, a client contract, or an internal policy covering financial or medical records at a single desk. The separate media slot makes it the practical option for anyone who also has to destroy access badges and archive discs.\u003c\/p\u003e\u003cp\u003eDo not buy it for volume. Seven or eight sheets a pass on a 250 W motor is slow work, and a 100-page report is a dozen passes. If you need P-5 with real throughput, the \u003cstrong\u003eKobra 240 C2 Turbo\u003c\/strong\u003e does 17-19 sheets at 1.9 x 15 mm on a 3\/4 HP chain-drive chassis. If P-4 is sufficient and speed matters more, the \u003cstrong\u003e+3 CC4\u003c\/strong\u003e gives you 12-14 sheets and keeps the media slot. And for classified material, no P-5 machine qualifies - only the \u003cstrong\u003e240 HS-6\u003c\/strong\u003e at P-7 is on the NSA EPL.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370609216,"sku":"kobra +2 CC2","price":513.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/de9eee07-2a54-4b75-a7cd-01c46550db14_dc35501f-55f7-462b-a659-5547caaebfa2.jpg?v=1754951562"},{"product_id":"kobra-2-ss4","title":"Kobra +2 SS4","description":"\u003cp\u003eTake the strip-cut head from the Kobra +1 SS4, add a dedicated 125 mm media slot and a second bin for plastic waste, and you have the +2 SS4. It is the model to buy when the bulk of your paper is routine - 17-19 sheets a pass at DIN 66399 P-2 - but you also need to destroy access badges, expired cards and archive discs without mixing plastic fragments into the paper recycling.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate 125 mm media slot with its own 1.5-litre bin.\u003c\/strong\u003e Discs and cards are destroyed and collected apart from the paper, which keeps a single-stream paper recycling route clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e17-19 sheets a pass.\u003c\/strong\u003e The strip head asks little of the 250 W motor, so thick stacks go through in one go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon paper bin.\u003c\/strong\u003e Slides out without lifting the cutting head; the front window shows the level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (full rating P-2 O-2 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.8 mm strips (1\/8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e17-19 sheets at 70 g\/m²; 15-17 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm) paper, plus a separate 5.0 in (125 mm) CD\/DVD slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres) paper, plus 0.4 gallon (1.5 litres) plastics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray discs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled: cutting head, 10.2-gallon paper bin, 0.4-gallon plastics bin and power cord. No waste bags are included and none are needed - both bins empty directly. Keep the two bins separate at emptying time if you want the plastic shreds kept out of the paper recycling.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThe +2 SS4 fits a reception desk, a records office or a stockroom that gets through a lot of low-sensitivity paper and has an ongoing trickle of expired ID cards and CDs. The two-bin design is the reason to pay more than the single-throat +1 SS4.\u003c\/p\u003e\u003cp\u003eWhat it is not is a compliance machine. P-2 permits 6 mm strips and this cuts 3.8 mm - readable fragments survive, and no US privacy framework treats that as adequate destruction of personal data. If your paper includes patient, payroll or customer records, buy the \u003cstrong\u003e+3 CC4\u003c\/strong\u003e (P-4, same two-bin layout) or the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e (P-5, same cabinet). If you want raw speed above all, the \u003cstrong\u003e+2 SS7\u003c\/strong\u003e takes 25-27 sheets at P-1.\u003c\/p\u003e\u003cp\u003eRunning costs are effectively zero. Neither bin takes a liner, there is no oil cartridge to reorder, and the Energy Smart standby means the machine draws almost nothing between jobs. The only routine task is remembering to check the 1.5-litre plastics bin, which has no window and will not stop the machine when it fills.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370641984,"sku":"Kobra +2 SS4","price":431.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/921d6398-1f0e-4b05-b456-d9963107b5b9_bb99ca88-49bf-48a4-903c-fc6ed2e9ab6a.jpg?v=1754951564"},{"product_id":"kobra-2-ss7","title":"Kobra +2 SS7","description":"\u003cp\u003eThe Kobra +2 SS7 pairs the fastest cutting head in the deskside range - 7.5 mm strips, 25-27 sheets a pass - with the two-bin layout of the +2 series. Its purpose is disposal volume, not confidentiality: at DIN 66399 P-1 it is the lowest security level in the standard. Where it earns its price over the single-throat +1 SS7 is the separate 125 mm media slot and 1.5-litre plastics bin.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-27 sheets a pass at 70 g\/m².\u003c\/strong\u003e The highest throughput in the +1\/+2\/+3 cabinet, because a 7.5 mm strip is the least work the 250 W motor can be asked to do.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate media slot and plastics bin.\u003c\/strong\u003e A 125 mm opening for discs and cards, collected in its own 1.5-litre bin away from the paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBagless 10.2-gallon paper bin.\u003c\/strong\u003e Empties without lifting the cutting head; the transparent window shows fill level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-1 (full rating P-1 O-1 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e7.5 mm strips (1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e25-27 sheets at 70 g\/m²; 22-24 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm) paper, plus a separate 5.0 in (125 mm) CD\/DVD slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres) paper, plus 0.4 gallon (1.5 litres) plastics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray discs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled: cutting head, 10.2-gallon paper bin, 0.4-gallon plastics bin and power cord. No waste bags are included and none are needed - both bins empty directly. Keep the two bins separate at emptying time if you want the plastic shreds kept out of the paper recycling.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is a bulk-disposal machine for a print room, a drawing office or a stores counter: high sheet counts, non-sensitive content, and an occasional badge or disc to destroy. The auto-reverse and 24-hour motor rating mean it copes with someone feeding it carelessly all day.\u003c\/p\u003e\u003cp\u003eDo not put anything private through it. P-1 permits strips up to 12 mm and even at 7.5 mm whole lines of text survive - it is not defensible destruction for personal, financial or medical data. For that, move to the \u003cstrong\u003e+3 CC4\u003c\/strong\u003e at P-4 or the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e at P-5, both in the same cabinet with the same media slot. If you need a compromise, the \u003cstrong\u003e+2 SS4\u003c\/strong\u003e at P-2 still gives you 17-19 sheets.\u003c\/p\u003e\u003cp\u003eOn placement: at 15.6 x 12 x 23.6 in and 26 lb, the +2 SS7 sits under a desk or beside a copier and stays there - there are no castors. Give yourself clearance at the front to pull both bins, and site it where a full 38.5-litre bin of loose strip shred can be tipped without carrying it far.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370674752,"sku":"Kobra +2 SS7","price":458.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/d3bc961f-93fa-4ac2-932a-94810889c1d4_a1247a38-71c4-433b-b6d5-a59a687e7a95.jpg?v=1754951567"},{"product_id":"kobra-3-cc4","title":"Kobra +3 CC4","description":"\u003cp\u003eThe Kobra +3 CC4 is the only shredder in this cabinet that will take a crumpled ball of paper. Kobra's Throw and Shred system uses a rotating flap feed behind a 230 x 100 mm opening to draw in screwed-up sheets without flattening them first - which is what actually happens beside a desk. Underneath it is the same 3.5 x 40 mm P-4 cross cut as the +1 CC4, with the +2 series' separate 125 mm media slot and plastics bin added.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e Kobra rates this drive for continuous running with thermal protection rather than a fixed on\/off duty cycle, so a long clear-out session does not force a cool-down break.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel cutting knives.\u003c\/strong\u003e Kobra states the knives are unaffected by staples and paper clips, so you are not stopping to de-staple every file.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into a power-saving standby after roughly eight seconds of inactivity, with an illuminated indicator showing which state it is in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, auto-reverse and safety stop.\u003c\/strong\u003e Photo-eyes start the rollers when paper enters; the cutters reverse on a jam and stop outright when the bin is removed or full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrow and Shred crumpled-paper feed.\u003c\/strong\u003e A 230 x 100 mm opening with rotating flaps accepts balled-up paper - no smoothing out, no unfolding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree intakes.\u003c\/strong\u003e 230 mm flat paper throat, 230 x 100 mm crumpled-paper opening, and a 125 mm slot for discs and plastic cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 cross cut at 3.5 x 40 mm.\u003c\/strong\u003e A 140 mm² particle, inside the 160 mm² DIN ceiling for P-4 - the usual level for personnel, customer and financial records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo bagless bins.\u003c\/strong\u003e 38.5 litres for paper, 1.5 litres for plastic, both emptied without lifting the cutting head.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (full rating P-4 T-4 E-3 F-1; O-1 T-2 E-2 for the media slot)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.5 x 40 mm (1\/8 x 1 5\/8 in) - 140 mm² particle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12-14 sheets at 70 g\/m²; 10-12 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.2 in (230 mm) paper; 5.0 in (125 mm) CD\/DVD slot; 230 x 100 mm crumpled-paper opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e10.2 gallons (38.5 litres) paper, plus 0.4 gallon (1.5 litres) plastics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1\/3 HP (250 W)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 Volt \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e53-55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.6 x 12 x 23.6 in (39 x 30 x 59 cm), W x D x H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, crumpled paper, credit cards, chip cards, films; CDs\/DVDs\/Blu-ray discs via the media slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous (24-hour rated motor, thermal protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled: cutting head, 10.2-gallon paper bin, 0.4-gallon plastics bin and power cord. No waste bags are included and none are needed - both bins empty directly. Keep the two bins separate at emptying time if you want the plastic shreds kept out of the paper recycling.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThe +3 CC4 is the pick for a private office or consulting room where paper arrives crumpled, the content is genuinely confidential, and there is a steady trickle of badges and archive discs. It is the most capable of Kobra's deskside machines without changing chassis.\u003c\/p\u003e\u003cp\u003eIt is not a volume machine. 12-14 sheets a pass on a 250 W motor means a long purge takes a long time, and the crumpled-paper feed handles one ball at a time. For departmental throughput at the same P-4 level, the \u003cstrong\u003eKobra 240 C4 Turbo\u003c\/strong\u003e takes up to 26 sheets on a chain-drive chassis. If your policy specifies P-5, the \u003cstrong\u003e+2 CC2\u003c\/strong\u003e is the same cabinet at 1.9 x 13 mm - but you drop to 7-8 sheets and lose the crumpled-paper feed.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690370740288,"sku":"Kobra +3 CC4","price":524.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/8a68c981-13d2-48b4-899c-d1a7b3bf0e6a_fa90d6c6-c901-4e41-86ee-0846b9fd663e.jpg?v=1754951570"},{"product_id":"23100-16175","title":"Dahle PaperSAFE PS 100 Paper Shredder, Oil Free \/ Hassle Free, Jam Protection, Security Level P-4, 5 Sheet Max, Shreds Staples, Paper Clips \u0026 Credit Cards","description":"\u003cp\u003eThe Dahle PaperSAFE PS 100 is the smallest machine Dahle makes for personal use, and its single distinguishing claim is that it never needs oiling. The cutting cylinders are designed to run dry, so there are no oil sheets to buy and no maintenance routine to skip — which is precisely the failure that kills most home and one-desk shredders. In return you accept a five-sheet pass and a four-gallon bin.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting head.\u003c\/strong\u003e No lubricant, no oil sheets, no consumables beyond the machine itself. This is the reason to choose a PaperSAFE over a comparable budget shredder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 security\u003c\/strong\u003e from a 3\/16\" x 11\/16\" particle — a genuinely confidential cut, not the strip-cut most machines at this size offer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e The motor reverses when it detects an overfeed, backing the stack out rather than stalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds staples, paper clips and credit cards\u003c\/strong\u003e as well as paper, so files do not need to be stripped before shredding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermally protected motor\u003c\/strong\u003e with automatic start and stop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-gallon pull-out bin\u003c\/strong\u003e that empties directly — no bags required and none needed as a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint\u003c\/strong\u003e: 8.5 inches wide and 13.75 inches deep, 7.9 lb, so it sits beside a desk or under it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 11\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e5 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e10 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e4 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e70 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e8.5 in W x 13.75 in D x 14.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e7.9 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year machine \/ 5 years cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSheet capacity is Dahle's rating on 8.5 x 11 in, 20 lb bond paper. The 3\/16\" x 11\/16\" particle is roughly 4.8 x 17.5 mm, about 84 mm² — inside the 160 mm² that DIN 66399 permits at P-4.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder and its integrated four-gallon bin, ready to plug in. There are no bags to fit and none are supplied, because the bin is emptied directly. No oil is included and none is required. Nothing needs assembling.\u003c\/p\u003e\n\u003ch2\u003eWhat a Deskside Machine Can and Cannot Do\u003c\/h2\u003e\n\u003cp\u003eThe PS 100 is honestly described as a personal shredder, and the specification reflects that in ways worth understanding before buying. Five sheets a pass and a four-gallon bin set the scale. The motor is thermally protected rather than continuous-duty: it is built to shred a document, pause, and shred another, not to run for half an hour without stopping. Dahle publishes no run-time or cool-down figure for the PaperSAFE range, so we will not quote one, but the design intent is clearly intermittent use. There is no dust filter — CleanTEC filtration is a separate range and no PaperSAFE has it — so fine paper dust does escape, which is a minor issue for occasional use in a private room and a real one in a dusty, heavily used office. And there is no bag: the bin is tipped straight into recycling. Within those limits it is a well-judged machine with genuinely nothing to maintain.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe PS 100 is for one person shredding a handful of pages at a time: household statements, a home office's client correspondence, a single desk in a small firm. If your shredding is measured in envelopes rather than folders, five sheets a pass is enough and the absence of any maintenance is worth more than throughput.\u003c\/p\u003e\n\u003cp\u003eIt is the wrong machine almost anywhere else. Five sheets is a low rating, and a four-gallon bin fills fast; if you shred more than a few pages a day, the PS 140 doubles the pass to ten sheets in the identical cabinet and is quieter at 65 dB against 70. If you need to destroy CDs or DVDs, neither the PS 100 nor the PS 140 is rated for optical media — step up to the PS 240, which adds an O-3 rating and a seven-gallon bin. And this is not a shared-office machine: for two or more regular users the PS 260 or PS 380 make far more sense, and a workgroup should be looking at the CleanTEC 51464 instead.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514638400,"sku":"23100-16175","price":148.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/ibrzmmrsjex9gqww9dzg.jpg?v=1754950813"},{"product_id":"23140-16176","title":"Dahle PaperSAFE PS 140 Paper Shredder, Oil Free \/ Hassle Free, Jam Protection, Security Level P-4, 10 Sheet Max, Shreds Staples, Paper Clips \u0026 Credit Cards","description":"\u003cp\u003eThe Dahle PaperSAFE PS 140 takes the same compact oil-free cabinet as the PS 100 and doubles the useful part: ten sheets a pass instead of five, at the same DIN P-4 security level and in exactly the same footprint. If you are choosing between the two, the PS 140 is the one that will not frustrate you.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen sheets per pass\u003c\/strong\u003e at 20 lb bond — twice the PS 100's rating with no increase in size or weight beyond 1.6 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders.\u003c\/strong\u003e No oil sheets, no lubricant, no maintenance schedule at all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4\u003c\/strong\u003e from a 3\/16\" x 11\/16\" particle — a confidential-grade cut rather than a strip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection\u003c\/strong\u003e reverses the motor on an overfeed instead of stalling and burning out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles staples, paper clips and credit cards\u003c\/strong\u003e alongside paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 dB\u003c\/strong\u003e, five decibels quieter than the PS 100, which is a clearly audible improvement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-gallon pull-out bin\u003c\/strong\u003e, emptied directly — no bags to buy or fit. Thermally protected motor with automatic start and stop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 11\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e11 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e4 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e65 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e8.5 in W x 13.75 in D x 14.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year machine \/ 5 years cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSheet capacity is quoted on 8.5 x 11 in, 20 lb bond paper. At approximately 4.8 x 17.5 mm the particle covers about 84 mm², well within DIN 66399's 160 mm² limit for P-4.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder with its four-gallon bin, ready to use. No bags are supplied and none are needed — the bin empties directly. No oil is included and none is required. There is nothing to assemble.\u003c\/p\u003e\n\u003ch2\u003ePaperSAFE or CleanTEC?\u003c\/h2\u003e\n\u003cp\u003eThese two Dahle ranges answer different questions and the store lists them side by side, so it is worth separating them. PaperSAFE is a deskside line built around a single idea: oil-free cutting cylinders, no bags, no filters, nothing to buy after the purchase. Capacities are modest, the motors are thermally protected rather than continuous-duty, and there is no dust filtration of any kind. CleanTEC is a cabinet line built around a different idea: an internal filter that captures up to 98% of fine paper dust, a chain-driven continuous-duty motor, sheet capacities from 13 to 26, and bins from 30 to 45 gallons — at the cost of consumable filters, and on the P-5 models, oil. If you are one person shredding a few pages at a time, the PS 140 is the right shape of machine and the CleanTEC would be an expensive way to do the same job. If several people share it, or the machine lives among desks all day, the reverse is true.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe PS 140 suits a home office or a single desk that produces a steady trickle of confidential paper: invoices, statements, client letters, printed emails. Ten sheets covers a folded document with enclosures in one go, and the oil-free head means the machine will still work in two years even if nobody has ever thought about it.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for CDs or DVDs. Neither the PS 140 nor the PS 100 carries an optical media rating; the PS 240 is the smallest PaperSAFE that does, and it adds a seven-gallon bin at the same ten-sheet rating. Do not buy it for a shared office either — a four-gallon bin will be emptied constantly once more than one person feeds it, and the PS 260 or PS 380 are sized for that. And if the machine has to sit in occupied open-plan space where paper dust is a complaint, no PaperSAFE has a dust filter; that is what the CleanTEC range is for.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516145728,"sku":"23140-16176","price":157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/daijkgzlgcgfqergsshg.jpg?v=1754950815"},{"product_id":"23240-16177","title":"Dahle PaperSAFE PS 240 Paper Shredder, Oil Free \/ Hassle Free, Jam Protection, Security Level P-4, 10 Sheet Max, Shreds Staples, Paper Clips \u0026 Credit Cards","description":"\u003cp\u003eThe Dahle PaperSAFE PS 240 is the point in the range where the machine starts to handle discs. It matches the PS 140's ten-sheet, P-4 rating but adds an O-3 optical media rating and a seven-gallon bin in a larger cabinet — and it does it while keeping the oil-free cutting head that defines the PaperSAFE line.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for CDs and DVDs.\u003c\/strong\u003e O-3 optical media destruction alongside P-4 for paper, which neither the PS 100 nor PS 140 offers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders\u003c\/strong\u003e — no lubricant, no oil sheets, no maintenance routine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiner particle than the small PaperSAFE models\u003c\/strong\u003e: 1\/8\" x 7\/16\" against 3\/16\" x 11\/16\", roughly 35 mm² against 84 mm², both within P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-gallon pull-out bin\u003c\/strong\u003e, nearly double the four gallons of the PS 100 and PS 140. No bags required or supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection\u003c\/strong\u003e with motor reversal on overfeed; thermally protected motor; automatic start and stop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles staples, paper clips and credit cards\u003c\/strong\u003e as well as paper and discs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 dB\u003c\/strong\u003e at 10 ft\/min through an 8.75-inch feed opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399) \/ O-3 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 7\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e10 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e7 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e65 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10.5 in W x 17.5 in D x 21.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e19.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year machine \/ 5 years cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSheet capacity is Dahle's figure for 8.5 x 11 in, 20 lb bond paper. The 1\/8\" x 7\/16\" particle is approximately 3.2 x 11.1 mm, about 35 mm² — inside DIN 66399's 160 mm² ceiling for P-4, though above the 30 mm² that P-5 would require, so this is a P-4 machine and should not be described as anything finer.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder with its seven-gallon bin, ready to plug in. No bags are included and none are needed — the bin is emptied directly. No oil is included and none is required. No dust filter is fitted; PaperSAFE models do not have one.\u003c\/p\u003e\n\u003ch2\u003eFeeding Discs and Cards Safely\u003c\/h2\u003e\n\u003cp\u003eThe optical media rating is the reason most buyers choose the PS 240 over the smaller PaperSAFE models, and it comes with handling rules that are not obvious. A CD or DVD does not shear like paper; it fractures, and the fragments load the cutting cylinders unevenly. Feed discs one at a time, on their own, centred in the throat, and let the machine finish before the next one goes in. The same applies to credit cards, which are thicker than they look and often have an embedded chip or a raised number. Never bury either in a stack of paper on the assumption that the machine will cope — that is how cutting cylinders get chipped, and chipped cylinders are what warranty claims are usually about. Also worth stating plainly: the O-3 rating covers optical discs only. Hard drives, solid-state drives, USB sticks and magnetic tape are outside it, and no PaperSAFE model will destroy them safely or compliantly.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe PS 240 fits a private office or a two-person practice with mixed disposal: paper most days, plus the occasional backup disc or expired credit card. The seven-gallon bin is the practical upgrade over the smaller PaperSAFE models — it turns emptying from a weekly chore into an occasional one — and the finer particle is a bonus at the same security class.\u003c\/p\u003e\n\u003cp\u003eDo not buy it purely for throughput. Ten sheets a pass is the same as the much smaller PS 140, so if paper volume is your problem and discs are not, the PS 260 at twelve sheets or the PS 380 at fifteen are better value in the identical cabinet. Do not buy it for a whole department: at 19.8 lb and seven gallons this is a personal machine, and a shared floor needs a CleanTEC cabinet such as the 51464 or 51514. And if fine paper dust in occupied space is a concern, no PaperSAFE has a filter — that is exclusively a CleanTEC feature.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516178496,"sku":"23240-16177","price":223.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/pnfu494aarxqsqb5ffva.jpg?v=1754950817"},{"product_id":"23260-16178","title":"Dahle PaperSAFE PS 260 Paper Shredder, Oil Free \/ Hassle Free, Jam Protection, Security Level P-4, 12 Sheet Max, Shreds Staples, Paper Clips \u0026 Credit Cards","description":"\u003cp\u003eThe Dahle PaperSAFE PS 260 sits in the middle of the seven-gallon PaperSAFE cabinet: twelve sheets a pass, P-4 paper security, O-3 for discs, and a 60 dB noise rating that makes it the first machine in the range you could comfortably put in a room with other people. It is the balanced choice between the PS 240 and the PS 380.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve sheets per pass\u003c\/strong\u003e at 20 lb bond, two more than the PS 240 in exactly the same cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 dB\u003c\/strong\u003e — five decibels quieter than the PS 240 and ten quieter than the PS 100, a difference you can hear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders\u003c\/strong\u003e: no lubricant, no oil sheets, no maintenance schedule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 paper and O-3 optical media.\u003c\/strong\u003e CDs, DVDs, credit cards, staples and paper clips all accepted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\" x 7\/16\" particle\u003c\/strong\u003e, about 35 mm² — the finer of the two PaperSAFE cutting heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-gallon pull-out bin\u003c\/strong\u003e emptied directly; no bags required or supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection\u003c\/strong\u003e with motor reversal, thermally protected motor, automatic start and stop, 8.75-inch feed opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399) \/ O-3 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 7\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e10 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e7 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10.5 in W x 17.5 in D x 21.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e23.5 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year machine \/ 5 years cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSheet ratings are Dahle's figures for 8.5 x 11 in, 20 lb bond paper. At roughly 3.2 x 11.1 mm the particle covers about 35 mm², which is within DIN 66399's 160 mm² ceiling for P-4 but above the 30 mm² required for P-5 — so this is a P-4 machine and nothing finer.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder and its seven-gallon bin, ready to plug in. No bags are included and none are needed. No oil is included and none is required. No dust filter is fitted — that is a CleanTEC feature and PaperSAFE machines do not have one.\u003c\/p\u003e\n\u003ch2\u003eChoosing Between the Seven-Gallon PaperSAFE Models\u003c\/h2\u003e\n\u003cp\u003eThe PS 240, PS 260 and PS 380 share a cabinet, a cutting head, a bin and a feed opening. They are, in every respect that shows up on a spec sheet other than sheet capacity, the same machine. That makes the choice unusually simple: work out what a typical feed looks like in your office and buy the model that swallows it in one go. Ten sheets on the PS 240 covers a short letter with enclosures. Twelve on the PS 260 covers most stapled documents without counting. Fifteen on the PS 380 means you stop thinking about it entirely. Noise falls slightly as you go up the range — 65 dB on the PS 240, 60 on both the PS 260 and PS 380 — and weight rises from 19.8 lb to 28.7 lb, which is a fair proxy for how much cutting head you are getting. What does not change is the P-4 security level, the O-3 disc rating or the seven-gallon bin.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eChoose the PS 260 for a private office, a consulting room or a two-to-three-person practice that shreds daily but not in bulk. The twelve-sheet pass handles a folded document with enclosures without counting pages, the seven-gallon bin does not demand constant attention, and 60 dB means it does not stop a conversation.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the volume is genuinely high. The PS 380 gives you fifteen sheets in the identical 10.5 x 17.5 x 21.5 inch cabinet at the same 60 dB and the same seven-gallon bin, and for a few dollars more it is the obvious step. Do not buy it as a shared department machine either — a seven-gallon bin fed by a whole floor becomes a daily job, and the CleanTEC 51464 or 51514 exist for exactly that. And if your policy specifies P-5, no PaperSAFE reaches it; the CleanTEC 51422 or 51472 do.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516211264,"sku":"23260-16178","price":262.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/tkutjv4gpwzncc6cqbi8.jpg?v=1754950820"},{"product_id":"23380-16179","title":"Dahle PaperSAFE PS 380 Paper Shredder, Oil Free \/ Hassle Free, Jam Protection, Security Level P-4, 15 Sheet Max, Shreds Staples, Paper Clips \u0026 Credit Cards","description":"\u003cp\u003eThe Dahle PaperSAFE PS 380 is the largest oil-free deskside machine Dahle builds, and the only one in the range that takes fifteen sheets in a pass. It keeps everything that makes the PaperSAFE line worth buying — no oil, no bags, no filters, nothing to maintain — and applies it to the volume a busy private office actually produces.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFifteen sheets per pass\u003c\/strong\u003e at 20 lb bond, the highest rating in the PaperSAFE range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders.\u003c\/strong\u003e No lubricant, no oil sheets, no schedule. Over the life of the machine there is nothing to reorder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 paper security with O-3 optical media\u003c\/strong\u003e, so CDs, DVDs, credit cards, staples and paper clips all go in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8\" x 7\/16\" particle\u003c\/strong\u003e, roughly 35 mm² — the finer of Dahle's two PaperSAFE cutting heads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 dB\u003c\/strong\u003e, matching the PS 260 and quieter than the smaller models despite the extra capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-gallon pull-out bin\u003c\/strong\u003e, emptied directly with no bags to fit or buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection\u003c\/strong\u003e that reverses the motor on an overfeed, thermally protected motor, automatic start and stop, 8.75-inch feed opening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399) \/ O-3 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 7\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e15 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.75 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e9 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e7 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e10.5 in W x 17.5 in D x 21.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year machine \/ 5 years cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eSheet capacity is Dahle's rating on 8.5 x 11 in, 20 lb bond paper. The 1\/8\" x 7\/16\" particle is about 3.2 x 11.1 mm, near 35 mm². That is comfortably inside the 160 mm² DIN 66399 allows for P-4, and above the 30 mm² P-5 would demand — the PS 380 is a P-4 machine.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder and integrated seven-gallon bin, ready to use out of the carton. No waste bags are supplied and none are required. No oil is supplied and none is required. There is no dust filter; PaperSAFE machines do not have CleanTEC filtration.\u003c\/p\u003e\n\u003ch2\u003eWhere a Deskside Machine Stops Being the Answer\u003c\/h2\u003e\n\u003cp\u003eThe PS 380 is the strongest machine in Dahle's oil-free deskside line, and knowing where its limits sit is more useful than another list of features. Three things mark the boundary. The seven-gallon bin: fine for one desk, tiresome once several people feed it, and unworkable as the destination for a floor's collected confidential waste. The motor: thermally protected and designed for intermittent use, not the chain-driven continuous-duty design in the CleanTEC cabinets, so working through archive boxes in one sitting is not what it is for. And the 8.75-inch feed: enough for letter and legal, but 11 x 17 tabloid will not enter it. Cross any of those lines and the honest recommendation is a cabinet shredder — the CleanTEC 51464 at 24 sheets into 30 gallons with dust filtration, or the 51514 at 26 sheets into 38. Below those lines, the PS 380 does the job with nothing to maintain and nothing to reorder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe PS 380 is the right machine for a single busy desk or a small practice where shredding happens every day: a solicitor's office, an accountant, a clinic reception, a home business handling client records. Fifteen sheets means you stop counting pages, and at 9 ft\/min the machine is deliberately unhurried rather than strained. Because there is nothing to maintain, it also suits an office where nobody has been given responsibility for the shredder.\u003c\/p\u003e\n\u003cp\u003eIt is still a deskside machine, and that is where the limits are. A seven-gallon bin fed by a whole department becomes a daily task; if several people share one machine, the CleanTEC 51464 gives you 24 sheets, a 30-gallon bin and dust filtration in a cabinet. The 8.75-inch feed will not take 11 x 17 tabloid — the CleanTEC 51472 and 51564 will. And if your destruction policy names P-5, no PaperSAFE meets it: the CleanTEC 51422, 51472 and 51522 are where that requirement is answered.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516244032,"sku":"23380-16179","price":342.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/j2w4uxzu0cf7bni4vwkp.jpg?v=1754950822"},{"product_id":"40330-05987","title":"Dahle 40330 Paper Shredder w\/Automatic Oiler, Jam Protection, SmartPower, Extreme Cross Cut, Security Level P-6, 6 Sheet Max, 2-4 Users","description":"\u003cp\u003eThe Dahle 40330 is the quietest machine in this batch and the smallest cabinet Dahle offers at DIN 66399 P-6. It cuts to roughly 0.8 x 11.1 mm - about 8.8 mm2, inside the 10 mm2 P-6 ceiling - at 47 dB into a 23-gallon bin. What sets it apart from its 40430 and 40530 siblings is nothing to do with the cut, which is identical across all three: it is simply the smallest and quietest of the family, at six sheets a pass.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue P-6 in a deskside-sized cabinet.\u003c\/strong\u003e A 0.8 x 11.1 mm particle is around 8.8 mm2, which sits inside DIN 66399's 10 mm2 limit for P-6. This is a genuine high-security cut, one class below P-7, in a cabinet 21.5 inches wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e47 dB - the quietest model in the range.\u003c\/strong\u003e Quieter than the 40430 (52 dB) and 40530 (50 dB) that use the same cutting geometry. If the machine is going next to desks, this is the one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator.\u003c\/strong\u003e A P-6 cutting head needs consistent oil far more than a cross-cut head does. The lubricator meters it continuously across the full cylinder width instead of relying on someone remembering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower energy management.\u003c\/strong\u003e SmartPower energy management drops the machine into standby and powers it down after 30 minutes of inactivity, so it is not drawing current overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e Detects an overfeed and reverses. On a six-sheet machine this earns its keep, because the difference between six sheets and nine is easy to misjudge by eye.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.25-inch feed opening.\u003c\/strong\u003e Letter-size paper feeds unfolded. Legal and tabloid do not fit without folding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro Cut (Dahle Extreme Cross Cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/32\" x 7\/16\" (approx. 0.8 x 11.1 mm, about 8.8 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e6 sheets (#20 bond); 8 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e10.25 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e23 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e47 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.5\" W x 17.25\" D x 34.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e94 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper. Not rated by Dahle for CDs, DVDs or credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20725\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; 1 year on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle does not publish a full carton packing list for this model. Expect the shredder on its 23-gallon cabinet with the power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e - Dahle 20725 bags (rated for 20-30 gallon shredders, 100 per box) are the matching consumable. Oil for the EvenFlow Lubricator is a separate purchase (Dahle 20721, 12 oz, or 20722, 1 gallon).\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 40330 for a small team - two to four people - that has to hit P-6 and wants the machine in the room with them rather than down the corridor. Legal practices, HR functions, R\u0026amp;D groups and clinical offices handling small volumes of genuinely sensitive paper are the natural fit, and 47 dB means it can live beside a desk.\u003cbr\u003e\u003cbr\u003eDo not buy it for volume. Six sheets of #20 bond a pass is slow, and a 23-gallon bin fills quickly with micro-cut waste. If more people share it, the \u003cstrong\u003eDahle 40430\u003c\/strong\u003e is the same cut at nine sheets with a 30-gallon bin and the \u003cstrong\u003eDahle 40530\u003c\/strong\u003e takes ten sheets through a 12-inch throat into 38 gallons. Do not buy it if you need to destroy CDs, cards or stapled files - Dahle does not rate this model for optical media or credit cards. And do not buy it expecting NSA compliance: P-6 is not P-7, the 40330 is not on the NSA\/CSS Evaluated Products List, and the 40334 is the EPL-listed machine in this same cabinet. Note too that the cutting cylinders carry a one-year warranty here, not the lifetime cover Dahle gives its P-3 to P-5 models.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517587520,"sku":"40330-05987","price":1788.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/upvcrd3guwyrsceamjvo.jpg?v=1754950908"},{"product_id":"50310-14004","title":"Dahle 50310 Oil-Free Paper Shredder w\/Jam Protection, SmartPower, German Engineered, 20 Sheet Max, 2-4 Users","description":"\u003cp\u003eThe Dahle 50310 removes the job nobody in an office actually does: oiling the shredder. It is an oil-free machine, which means no lubricant sheets, no squeeze bottles and no automatic oiler reservoir to refill - and at 46 dB it is the quietest shredder in this group. The trade is security level. At DIN 66399 P-3 it produces a roughly 4.8 x 39.7 mm particle, which is appropriate for general internal paper but not for regulated or high-value confidential material.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuinely oil-free.\u003c\/strong\u003e No lubrication routine at all. Dahle states the machine 'maintains peak performance without maintenance' in this respect, which removes both a recurring consumable cost and the most commonly skipped maintenance task in any office.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46 dB - the quietest machine here.\u003c\/strong\u003e Lower than every other model in this range, including Dahle's high-security cabinets. It belongs in an occupied office.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 sheets a pass.\u003c\/strong\u003e 20 sheets of #20 bond, 22 of #16, at 20 ft\/min. The highest sheet rating of any 23-gallon cabinet in this family by a wide margin - the P-4 50314 takes 16 and the P-6 40330 takes six.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds CDs, DVDs, credit cards, staples and paper clips.\u003c\/strong\u003e Rated by Dahle for all of them, so a drawer clear-out does not need sorting into two piles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e Senses an overfeed and reverses before the cylinders stall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower energy management.\u003c\/strong\u003e SmartPower energy management drops the machine into standby and powers it down after 30 minutes of inactivity, so it is not drawing current overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-cylinder warranty.\u003c\/strong\u003e Two years on the machine and life on the cylinders - Dahle's strongest cylinder cover, offered on its P-3 to P-5 models only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-3 | O-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 1 9\/16\" (approx. 4.8 x 39.7 mm, about 189 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets (#20 bond); 22 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShredding speed\u003c\/th\u003e\n\u003ctd\u003e20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e10.25 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e23 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e46 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.5\" W x 17.25\" D x 34.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e95 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs \/ DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20725\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; lifetime on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle does not publish a full packing list for the 50310. Expect the shredder on its 23-gallon cabinet with the power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e - Dahle 20725 (20-30 gallon shredders, 100 per box) is the matching consumable. There is no oil to buy: the machine is oil-free, so Dahle's 20721 and 20722 lubricants are not required and should not be used.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 50310 for a small office of two to four people that shreds a steady stream of ordinary internal paper - drafts, duplicate copies, meeting notes, spent correspondence - and wants a machine that works without a maintenance habit attached. Twenty sheets a pass, 46 dB and no oiling makes it the most frictionless shredder in this range.\u003cbr\u003e\u003cbr\u003eDo not buy it if your material is regulated, contractual or genuinely confidential. P-3 permits particles up to 320 mm2, and at roughly 189 mm2 the 50310 is a mid-range P-3, not a borderline P-4. Most privacy policies and client agreements expect P-4 or better - and for that the \u003cstrong\u003eDahle 50314\u003c\/strong\u003e is the same oil-free cabinet, the same size, the same 46 dB, at 16 sheets a pass. Do not buy it for high-security work either: the \u003cstrong\u003eDahle 40330\u003c\/strong\u003e is the P-6 machine in this cabinet size, and no P-3 shredder qualifies under NSA\/CSS 02-01. And do not buy it for a department - a 10.25-inch throat will not take legal or tabloid paper unfolded.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517620288,"sku":"50310-14004","price":992.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/qeiuvtpl1jooleia4qai_314b25af-ad79-4a53-b8e5-9f1309ef99c1.jpg?v=1754950910"},{"product_id":"50314-12672","title":"Dahle 50314 Oil-Free Paper Shredder w\/Jam Protection, SmartPower, German Engineered, 16 Sheet Max, Security Level P-4, 2-4 Users","description":"\u003cp\u003eFor most small offices the Dahle 50314 is the sensible default in this range. It meets DIN 66399 P-4 - the level most privacy policies and client contracts actually ask for - it takes 16 sheets a pass, it shreds CDs and cards as well as paper, and it never needs oiling. Set against its oil-free sibling the 50310, the difference is a single step in security: the same cabinet, the same 46 dB, the same 23-gallon bin, four fewer sheets per pass, and a particle a third the size.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 at roughly 127 mm2.\u003c\/strong\u003e The 1\/8\" x 1 9\/16\" cut works out to about 127 mm2, inside DIN 66399's 160 mm2 limit for P-4. This is the level commonly specified for confidential business records and personal data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free operation.\u003c\/strong\u003e No lubricant bottles, no oiler reservoir, no maintenance routine. Dahle states the machine maintains performance without it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 sheets a pass.\u003c\/strong\u003e 16 sheets of #20 bond, 18 of #16 - four fewer than the P-3 50310 in the same cabinet, but well ahead of anything at a higher security level in this size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46 dB.\u003c\/strong\u003e Tied with the 50310 as the quietest machine in this range, and quiet enough to live in an occupied office.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds CDs, DVDs, credit cards, staples and paper clips.\u003c\/strong\u003e Rated for all of them, so old backup discs and expired cards do not need a second machine or an outside service.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e Overfeed detection with auto-reverse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower energy management.\u003c\/strong\u003e SmartPower energy management drops the machine into standby and powers it down after 30 minutes of inactivity, so it is not drawing current overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-cylinder warranty.\u003c\/strong\u003e Two years on the machine and life on the cutting cylinders, which Dahle offers on its P-3 to P-5 models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 | O-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\" (approx. 3.2 x 39.7 mm, about 127 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets (#20 bond); 18 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e10.25 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e23 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e46 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.5\" W x 17.25\" D x 34.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e89 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs \/ DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20725\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; lifetime on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle publishes no full carton packing list for the 50314. What arrives is the shredder on its 23-gallon cabinet with the power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e - order Dahle 20725 (20-30 gallon shredders, 100 per box). No oil is needed or wanted: this is an oil-free machine, so Dahle's 20721 and 20722 lubricants do not apply to it.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 50314 if you want one shredder for a small office and you would rather not think about it again. P-4 satisfies the great majority of commercial confidentiality and personal-data requirements, 16 sheets a pass is enough for two to four people, CDs and cards go in the same slot as paper, and there is nothing to lubricate. At 89 lb it is the lightest cabinet machine here.\u003cbr\u003e\u003cbr\u003eDo not buy it if a policy names P-5 or higher. A 127 mm2 particle is P-4 and nothing more; for P-5 you are looking at the \u003cstrong\u003eDahle 20392\u003c\/strong\u003e, and for P-6 in a cabinet this size at the \u003cstrong\u003eDahle 40330\u003c\/strong\u003e - which takes six sheets a pass and does not shred CDs. Do not buy it if you shred by the box: 16 sheets into 23 gallons is a small-office rating, and a department needs a 30-gallon or 38-gallon cabinet. And do not buy it if legal or tabloid paper is routine - the 10.25-inch throat will not take either unfolded. If your material is genuinely low-sensitivity and volume matters more than particle size, the \u003cstrong\u003eDahle 50310\u003c\/strong\u003e is the same machine at P-3 with 20 sheets a pass.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517653056,"sku":"50314-12672","price":1053.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/qeiuvtpl1jooleia4qai.jpg?v=1754950912"},{"product_id":"51314-13836","title":"DAHLE CleanTEC 51314 Oil-Free Paper Shredder w\/Fine Dust Filter, Jam Protection, SmartPower, Security Level P-4, 16 Sheet Max, 2-4 Users","description":"\u003cp\u003eThe Dahle CleanTEC 51314 is the combination most small offices actually want and rarely find: oil-free running and a fine dust filter in the same machine. Dahle's CleanTEC line normally pairs dust filtration with an automatic oiler; on the 51314 and its bigger sibling the 51414, the cutting head runs dry instead. You get P-4 shredding at 46 dB with up to 98% of the airborne paper dust captured, and nothing to lubricate.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC fine dust filtration.\u003c\/strong\u003e Dahle states the integrated filter traps up to 98% of fine dust particles. Replacement filter is Dahle item #20710.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting head.\u003c\/strong\u003e No lubricant, no oiling schedule and no oil residue - unusual in the CleanTEC range, where most models use an automatic oiler.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46 dB operating noise.\u003c\/strong\u003e Tied with the 51322 as the quietest machine in this comparison, and 14 dB below the desk-side 52214.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 cross-cut at 1\/8\" x 1 9\/16\".\u003c\/strong\u003e Inside the 160 mm² DIN 66399 ceiling for P-4, the level most written destruction policies name for personal data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e23-gallon bin in a compact cabinet.\u003c\/strong\u003e 17.25 x 21.5 inches on the floor and 34.25 inches tall - it fits a small office without dominating it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-3 rated for optical media.\u003c\/strong\u003e CDs, DVDs, credit cards, staples and paper clips are all on Dahle's accepted list.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower and automatic jam protection.\u003c\/strong\u003e Powers down after 30 minutes of inactivity; the cylinder design resists the misfeeds that come from folded or stapled stacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 (optical media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets at 20 lb bond (18 at 16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed \/ throat width\u003c\/th\u003e\n\u003ctd\u003e10.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWaste bin volume\u003c\/th\u003e\n\u003ctd\u003e23 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e18 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e46 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e17.25 x 21.5 x 34.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e94 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eOil-free - no lubricant required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust filtration\u003c\/th\u003e\n\u003ctd\u003eDahle CleanTEC, up to 98% of fine dust (replacement filter #20710)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e51314-13836\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFigures above are as published by Dahle for this model. Dahle quotes sheet capacity under ideal conditions - new cutting cylinders, a cold motor and a supply at nominal voltage and frequency. Dahle does not publish a motor wattage, amperage or duty-cycle figure for this shredder.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDahle does not publish a full packing list for this model. What ships is the assembled shredder on its waste-bin cabinet with lockable casters, the power cord and the instruction manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred bags are not included.\u003c\/strong\u003e The 23 gallons bin takes Dahle shred bags item #20725, sold separately in boxes of 100.\u003c\/li\u003e\n\u003cli\u003eThe CleanTEC dust filter is fitted at the factory. Replacements are a separate consumable (item #20710).\u003c\/li\u003e\n\u003cli\u003eNo oil, oiling sheets or lubricant of any kind are required or supplied - this cutting head runs dry by design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the machine for a two-to-four person office where someone is sensitive to paper dust - an enclosed room with poor ventilation, a team member with asthma or another respiratory condition, or a practice where the shredder sits close to where people breathe all day. Combined with 46 dB and oil-free running, it is about as unobtrusive as a P-4 office shredder gets.\u003c\/p\u003e\u003cp\u003eThe trade is capacity. Sixteen sheets per pass and a 23-gallon bin are the smallest figures of any full-size machine here. If the same dust filtration is needed at higher volume, the \u003cstrong\u003eCleanTEC 51414\u003c\/strong\u003e is the same machine with 18 sheets and a 30-gallon bin. If you do not need the filter, the \u003cstrong\u003eDahle 50414\u003c\/strong\u003e gives you 18 sheets, a 30-gallon bin and the same 46 dB for less money, plus Dahle's lifetime cutting-cylinder coverage. And if your policy calls for finer than P-4, the \u003cstrong\u003eCleanTEC 51322\u003c\/strong\u003e is the P-5 version of this cabinet - at 12 sheets, and with an automatic oiler rather than oil-free running.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517685824,"sku":"51314-13836","price":1642.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/qeiuvtpl1jooleia4qai_fe8e0a47-ce24-4362-b624-62e9590feb42.jpg?v=1754950913"},{"product_id":"51322-13848","title":"DAHLE CleanTEC 51322 Paper Shredder w\/Fine Dust Filter, Automatic Oiler, Jam Protection, Security Level P-5, 12 Sheet Max, 2-4 Users","description":"\u003cp\u003eThe Dahle CleanTEC 51322 is the only P-5 machine in this range, and the only one here that trades sheet capacity for a genuinely finer particle. Its 1\/13\" x 9\/16\" cut works out to roughly 1.9 x 14 mm - around 27 mm², inside the 30 mm² ceiling DIN 66399 sets for P-5. Twelve sheets per pass, 46 dB, a fine dust filter and an automatic oiler, in the same compact cabinet as the P-4 51314. If your destruction standard specifies P-5 rather than P-4, this is the small-office answer.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-5 at roughly 1.9 x 14 mm.\u003c\/strong\u003e About 27 mm² per particle. Dahle labels the machine cross-cut; by DIN particle area it falls in the micro-cut band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator.\u003c\/strong\u003e Applies slow, continuous oil to the cutting cylinders. A P-5 head needs lubrication, and automating it removes the maintenance step people forget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC fine dust filtration.\u003c\/strong\u003e Dahle states up to 98% of fine dust is trapped at source - more relevant here than on a cross-cut machine, because finer cutting generates more airborne particulate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46 dB operating noise.\u003c\/strong\u003e The quietest reading in this comparison, shared with the 51314.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e23-gallon bin with bin-full auto-off.\u003c\/strong\u003e Fine particles pack densely, so this bin runs longer on a P-5 cut than the same volume would on a P-4 machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermally protected motor and automatic jam protection.\u003c\/strong\u003e The motor shuts down rather than overheating; the cylinder design resists the misfeeds a 12-sheet stack can cause.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-year warranty with lifetime cutting cylinders.\u003c\/strong\u003e Dahle's published spec sheet for the 51322 lists two years on the shredder and lifetime coverage on the cylinders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/13\" x 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12 sheets at 20 lb bond (14 at 16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed \/ throat width\u003c\/th\u003e\n\u003ctd\u003e10.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWaste bin volume\u003c\/th\u003e\n\u003ctd\u003e23 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e18 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e46 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e17.25 x 21.5 x 34.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e95 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eAutomatic EvenFlow Lubricator (Dahle shredder oil required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust filtration\u003c\/th\u003e\n\u003ctd\u003eDahle CleanTEC, up to 98% of fine dust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years; lifetime on cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e51322-13848\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFigures above are as published by Dahle for this model. Dahle quotes sheet capacity under ideal conditions - new cutting cylinders, a cold motor and a supply at nominal voltage and frequency. Dahle does not publish a motor wattage, amperage or duty-cycle figure for this shredder.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDahle does not publish a full packing list for this model. What ships is the assembled shredder on its waste-bin cabinet with lockable casters, the power cord and the instruction manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred bags are not included.\u003c\/strong\u003e The 23 gallons bin takes Dahle shred bags item #20725, sold separately in boxes of 100.\u003c\/li\u003e\n\u003cli\u003eThe CleanTEC dust filter is fitted at the factory. Replacements are a separate consumable.\u003c\/li\u003e\n\u003cli\u003eThe EvenFlow Lubricator requires Dahle shredder oil, which is an ongoing consumable and is not supplied in quantity with the machine.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy the 51322 when a written policy, a client contract or a data protection assessment specifically calls for P-5. That is common in legal practices, medical records handling, financial advisory work and anywhere a supplier's destruction standard has been imposed on you. In a two-to-four person office it is quiet, it filters its own dust, and it oils itself.\u003c\/p\u003e\u003cp\u003eDo not buy it to be cautious. Twelve sheets per pass against 16 on the P-4 \u003cstrong\u003eCleanTEC 51314\u003c\/strong\u003e - the same cabinet, same bin, same noise level - is a 25% reduction in working pace for a security step most organisations do not require. Note too that unlike almost every other machine in this range, the 51322 is \u003cstrong\u003enot rated for CDs or DVDs\u003c\/strong\u003e: Dahle lists paper, staples, paper clips and credit cards only. If you destroy optical media, this is the wrong machine and the 51314 or 51414 is the right one. And it is not oil-free - the auto-oiler removes the labour but not the consumable.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517718592,"sku":"51322-13848","price":1642.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/qeiuvtpl1jooleia4qai_e78a45af-8493-4815-828c-4e20abcaa507.jpg?v=1754950915"},{"product_id":"52214-17003","title":"Dahle 52214 Oil-Free Paper Shredder w\/Jam Protection, SmartPower, German Engineered, 20 Sheet Max, Security Level P-4, 2-4 Users","description":"\u003cp\u003eThe Dahle 52214 is the small machine in this line-up, and its headline is that it does not cut a small machine's corners on the shred: 20 sheets per pass at P-4, from a 53-pound cabinet that fits beside a desk. What you give up for that footprint is bin size, speed and warranty - an 11-gallon bin, 7 ft\/min, and one year of coverage rather than the two years plus lifetime cylinders Dahle puts on its larger oil-free models. It is a personal and small-team shredder, not a scaled-down department machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 sheets per pass at P-4.\u003c\/strong\u003e An unusually high pass rating for a machine this size, and the same 1\/8\" x 1 9\/16\" particle as Dahle's much larger office models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e53 pounds and 14 x 16 inches on the floor.\u003c\/strong\u003e Small enough to live under or beside a desk rather than in a shared copy room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting head.\u003c\/strong\u003e No lubricant to buy and no oiling routine on a machine that will often be looked after by whoever sits nearest it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower energy management.\u003c\/strong\u003e Powers down after 30 minutes of inactivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e Dahle's cylinder design reduces the misfeeds that are most common when a single user drops in a folded stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermally protected motor.\u003c\/strong\u003e Cuts out on overheat rather than running to failure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eO-3 rated for CDs, DVDs and credit cards.\u003c\/strong\u003e Staples and paper clips are also on Dahle's accepted-media list.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 (optical media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets at 20 lb bond (22 at 16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed \/ throat width\u003c\/th\u003e\n\u003ctd\u003e9.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWaste bin volume\u003c\/th\u003e\n\u003ctd\u003e11 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e7 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e14 x 16 x 27.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e53 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eOil-free - no lubricant required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e52214-17003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFigures above are as published by Dahle for this model. Dahle quotes sheet capacity under ideal conditions - new cutting cylinders, a cold motor and a supply at nominal voltage and frequency. Dahle does not publish a motor wattage, amperage or duty-cycle figure for this shredder.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDahle does not publish a full packing list for this model. What ships is the assembled shredder on its waste-bin cabinet with lockable casters, the power cord and the instruction manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred bags are not included.\u003c\/strong\u003e Dahle does not publish a shred bag part number matched to this bin size - check the fit before ordering in quantity.\u003c\/li\u003e\n\u003cli\u003eNo oil, oiling sheets or lubricant of any kind are required or supplied - this cutting head runs dry by design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThe 52214 makes sense for one person or a team of two to four who shred steadily but not in bulk - a practice manager, a small finance team, a home office handling client records. The P-4 cut is the same one you get on machines three times the price, so you are not compromising on security to save space.\u003c\/p\u003e\u003cp\u003eBe honest with yourself about the 11-gallon bin. On a machine rated for 20 sheets a pass, that bin fills quickly, and emptying is the task people put off. If more than two people will use it daily, step up to the \u003cstrong\u003eDahle 50414\u003c\/strong\u003e - 30-gallon bin, 46 dB instead of 60, and a two-year warranty with lifetime cutting cylinders. The 52214 is also the noisiest and slowest machine here at 60 dB and 7 ft\/min; if it will sit in a quiet room where people take calls, that matters more than the specification sheet suggests.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691517751360,"sku":"52214-17003","price":459.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/ia20ffr9k7lor7poh3iv.jpg?v=1754950917"},{"product_id":"3227901","title":"Fellowes 79Ci 100% Jam Proof Cross-Cut Paper Shredder","description":"\u003cp\u003eThe 79Ci is the smallest of Fellowes' 100% Jam Proof machines and the one most small offices end up buying: sixteen sheets a pass at DIN 66399 P-4, a 9-inch throat, a 6-gallon bin and twenty minutes of run time.\u003c\/p\u003e\n\u003cp\u003eThe Jam Proof designation is worth taking seriously rather than dismissing as a slogan. The system measures the stack at the throat and prevents an overload from engaging the cutters, which changes the common failure mode from a stalled head somebody has to clear into a machine that simply declines the handful. On a shredder shared by five or six people, that is the difference between a device that stays in service and one that quietly stops being used.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-cut at 5\/32 x 1 1\/2 in\u003c\/strong\u003e (4 x 38 mm, about 152 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e, which blocks overloads before they reach the cutters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafeSense technology\u003c\/strong\u003e — the machine stops if hands touch the paper entry, which matters in an office where the shredder sits at floor level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilentShred acoustic design\u003c\/strong\u003e for shared rooms.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, CDs and DVDs, staples and small paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry\u003c\/strong\u003e and a 6-gallon pull-out bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 minutes on, 30 minutes off\u003c\/strong\u003e, at 120 V, 60 Hz, 4 A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRead the excluded materials before you buy for a specific job. Fellowes lists adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays and plastics other than credit cards and discs as materials this machine will not shred. The large paper clip exclusion catches people out: small clips are fine, binder clips and heavy-gauge clips are not.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/2 in (4 x 38 mm, about 152 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e20 minutes on, 30 minutes off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 4 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21.06 x 15.16 x 10.24 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e28.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, CDs\/DVDs, staples, small paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as SilentShred but publishes no decibel value, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, and asks that the machine be oiled each time the waste bin is emptied. Aerosol lubricants must not be used in any shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 79Ci for a small office, a reception area or a home office that needs a capable machine rather than a token one. Sixteen sheets, twenty minutes and a materials list that includes cards and discs cover almost everything a small business generates, and SafeSense makes it defensible in a space where people walk past it all day.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the bin will be the bottleneck. Six gallons is small for a sixteen-sheet machine and you will empty it often; the \u003cstrong\u003e99Ci\u003c\/strong\u003e offers 18 sheets, a 9-gallon bin and a 40-minute run time in the same product family, and for most buyers weighing the two it is the better value. Do not buy it if a policy names P-5 — the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is Fellowes' micro-cut answer at roughly 24 mm². And if the machine will be fed all day by a department, the continuous-duty \u003cstrong\u003ePowershred 125Ci\u003c\/strong\u003e is the right class of machine.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995667520,"sku":"3227901","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/79Ci_HeroLeft_c5470e46-f23a-4241-af2f-e49a90a7b12b.png?v=1754951503"},{"product_id":"3229901","title":"Fellowes 99Ci 100% Jam Proof Cross-Cut Paper Shredder","description":"\u003cp\u003eThe 99Ci is the model in Fellowes' small-office range where the duty cycle stops being the limiting factor: forty minutes of continuous operation, double the 79Ci, paired with eighteen sheets a pass and a 9-gallon bin.\u003c\/p\u003e\n\u003cp\u003eIt is the machine to choose when the shredding gets done in sessions rather than a few sheets at a time. Forty minutes at eighteen sheets is several hundred pages, and the larger bin means you are not interrupted halfway through by a container that needs emptying.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 minutes on, 40 minutes off.\u003c\/strong\u003e Twice the run time of the 79Ci.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEighteen sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-cut at 5\/32 x 1 1\/2 in\u003c\/strong\u003e (4 x 38 mm, about 152 mm²).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e and SafeSense contact protection.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSilentShred acoustic design.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, CDs and DVDs, staples and small paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry\u003c\/strong\u003e with a 9-gallon pull-out bin.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e25.19 x 11.44 x 17.31 in, 36.4 lb.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe step up from the 79Ci is worth spelling out because the two machines look similar on a shelf. You gain two sheets a pass, three gallons of bin capacity and twenty extra minutes of run time, and you pay for it in footprint and weight. The sheet count is the least significant of those three. The run time and the bin are what determine whether a shredding session finishes in one sitting.\u003c\/p\u003e\n\u003cp\u003eAs with the rest of the Ci range, Fellowes excludes adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders and X-rays. Small clips and staples are fine; binder clips are not.\u003c\/p\u003e\n\u003cp\u003eThe 100% Jam Proof system is the same arrangement used across the Ci cabinets, and it is worth understanding what it does. Rather than stalling on an over-thick handful and requiring someone to reverse the cutters and pull the wreckage out, the machine reads the stack at the entry and refuses to start. The failure mode becomes a five-second annoyance instead of a five-minute repair, which is precisely what determines whether a shared shredder stays in service. SafeSense works on the same principle at the other end of the risk scale, stopping the cutters if a hand touches the paper entry.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/2 in (4 x 38 mm, about 152 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e18 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e9 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e40 minutes on, 40 minutes off\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e25.19 x 11.44 x 17.31 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e36.4 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, CDs\/DVDs, staples, small paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes publishes no decibel value for this model, describing the acoustic design only as SilentShred, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 9-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, and asks that the machine be oiled each time the waste bin is emptied. Aerosol lubricants must not be used in any shredder.\u003c\/p\u003e\n\u003cp\u003eThere is no separate bag part number published by Fellowes for this bin. Most buyers run it unlined or use a generic liner; if your shredded waste is collected by a confidential destruction contractor, check what presentation they require before you settle on one.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 99Ci for a small office of five to eight people, or for anyone who shreds in sittings rather than a page at a time. Forty minutes of run time means a backlog gets cleared in one afternoon, the 9-gallon bin means the interruptions are manageable, and the materials list covers cards and discs as well as paper.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the machine will be fed continuously through a working day. Forty minutes is generous for a small-office shredder but it is still a cycle, and the continuous-duty \u003cstrong\u003ePowershred 125Ci\u003c\/strong\u003e at 20 sheets and 14 gallons is the correct class of machine for a department. Do not buy it if a policy names P-5; the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is Fellowes' micro-cut option. And if the volume is genuinely small, the \u003cstrong\u003e79Ci\u003c\/strong\u003e costs less and takes up less room for two sheets fewer per pass.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995700288,"sku":"3229901","price":428.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/99Ci_HeroLeft_fa052f2e-8ab0-4678-b144-ba2026c38266.png?v=1754951505"},{"product_id":"5015101","title":"Powershred LX200 Cross-Cut Shredder (White)","description":"\u003cp\u003eThis is the white version of the Fellowes LX200, mechanically identical to the black 5015001 and offered for rooms where a black box beside the desk looks like equipment rather than furniture. Twelve sheets a pass, a 6-gallon bin, ten minutes of running.\u003c\/p\u003e\n\u003cp\u003eThe specification that justifies the LX200 over a budget shredder is the cut: 5\/32 by 1\/2 inch, about 4 by 12 mm or 48 mm². That is roughly a third the fragment area a conventional P-4 cross-cut leaves behind, on a machine sized for a single desk.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite finish\u003c\/strong\u003e — the same machine as the black 5015001, for rooms where the shredder is visible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry\u003c\/strong\u003e for legal and A4 unfolded.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples and paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTen minutes on, 15-minute cool-down.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-gallon pull-out bin\u003c\/strong\u003e, 20.69 x 14.50 x 10.25 in, 20.7 lb.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e120 V, 60 Hz, 4.0 A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e10 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 4.0 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e20.69 x 14.50 x 10.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e20.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the white LX200 for a home office, a consulting room or any space where the shredder sits in view and a black cabinet would read as an appliance. It is the same machine as the black version in every functional respect, so the decision is purely about the room.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you have a backlog. Ten minutes of run time and a 6-gallon bin are sized for routine post, not for clearing a cabinet; the \u003cstrong\u003eLX210\u003c\/strong\u003e in white (5015301) doubles the run time and adds four sheets a pass, and the \u003cstrong\u003eLX220\u003c\/strong\u003e in white (5015501) manages thirty minutes and twenty sheets. Do not buy it if optical media is part of your waste stream, because no LX model takes discs. And if a specification names P-5, this is not that machine.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995733056,"sku":"5015101","price":324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/LX200-091621_49663d9a-675d-4c1c-b237-27b774ceb00c.png?v=1754951508"},{"product_id":"5015001","title":"Powershred LX200 Cross-Cut Shredder (Black)","description":"\u003cp\u003eThe LX200 is the entry point to Fellowes' LX range and the smallest of the three LX models: twelve sheets a pass, a 9-inch paper entry, a 6-gallon bin and ten minutes of continuous running. This is the black finish; the same machine is also sold in white.\u003c\/p\u003e\n\u003cp\u003eWhat the LX200 gives you over a cheap cross-cut shredder is particle size. The cut is 5\/32 by 1\/2 inch — about 4 by 12 mm, roughly 48 mm² — against the 150 mm² or so a typical P-4 cross-cut produces. Both sit in DIN class P-4, but one of them leaves fragments three times smaller, and on a desk shredder that is the difference worth paying for.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm² per particle) — roughly a third the fragment size of an ordinary P-4 cross-cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry.\u003c\/strong\u003e Legal and A4 feed unfolded.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples and paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen minutes of continuous running\u003c\/strong\u003e, with a 15-minute cool-down if you exceed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-gallon pull-out bin\u003c\/strong\u003e in a 20.69 x 14.50 x 10.25 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20.7 lb\u003c\/strong\u003e — light enough to move between rooms.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e120 V, 60 Hz, 4.0 A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e10 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 4.0 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e20.69 x 14.50 x 10.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e20.7 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the LX200 for a home office or a single desk where the paper is genuinely confidential and the volume is modest. Twelve sheets a pass is enough that you are not feeding it a page at a time, the fine cut is a real security gain over a budget cross-cut machine, and at 20.7 lb it can be moved without help.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you shred in sessions. Ten minutes of run time and a 6-gallon bin will both run out before a drawer is cleared; the \u003cstrong\u003eLX210\u003c\/strong\u003e doubles the run time and takes sixteen sheets on the same bin, and the \u003cstrong\u003eLX220\u003c\/strong\u003e manages thirty minutes and twenty sheets with an 8-gallon container. Do not buy it if you need to destroy CDs or DVDs — no LX model accepts them. And if a policy names P-5, none of the LX range reaches it; the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is Fellowes' genuine micro-cut machine.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995765824,"sku":"5015001","price":374.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/LX200-Black-HeroLeft-Light-100421_3b3be745-819d-4c82-8fcd-b08c943a5a78.png?v=1754951510"},{"product_id":"5015301","title":"Powershred LX210 Cross-Cut Shredder (White)","description":"\u003cp\u003eThis is the white LX210, functionally identical to the black 5015201 and chosen for the same reason anyone chooses a white appliance: because the machine has to live somewhere visible. Sixteen sheets a pass, twenty minutes of running, a 6-gallon bin.\u003c\/p\u003e\n\u003cp\u003eWithin the LX range this is the model that gets the balance right for most home offices. The LX200 runs for ten minutes, which is short if you save paper up; the LX220 is a noticeably larger cabinet. The LX210 sits between them at 26.9 pounds and just over 21 inches tall.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite finish\u003c\/strong\u003e — the same machine as the black 5015201.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty minutes of continuous running\u003c\/strong\u003e, with a 15-minute cool-down if exceeded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm²).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry\u003c\/strong\u003e for legal and A4 unfolded.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples, paper clips and unopened junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-gallon pull-out bin\u003c\/strong\u003e, 21.06 x 11.69 x 14.13 in, 26.9 lb.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e120 V, 60 Hz, 4.8 A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e20 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 4.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21.06 x 11.69 x 14.13 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26.9 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips, junk mail — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the white LX210 for a home office, a study or a client-facing room where the shredder is on show. Functionally it is the black machine: sixteen sheets, twenty minutes, a fine 48 mm² particle and a materials list that covers cards, staples, clips and junk mail.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the 6-gallon bin will be the annoyance. It is the same container as the smaller LX200, so a full twenty-minute session means emptying it more than once; the \u003cstrong\u003eLX220\u003c\/strong\u003e in white (5015501) carries 8 gallons and runs for thirty minutes. Do not buy it if you need CDs or DVDs destroyed, because no LX model accepts them. And if you have been asked for P-5 in writing, this machine is P-4 and will not satisfy that requirement.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995798592,"sku":"5015301","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/WebOnly_LX210-HeroLeft-Light-120919_29ff7db8-4fdf-4b89-8ed9-fdcbff081602.png?v=1754951512"},{"product_id":"5015201","title":"Powershred LX210 Cross-Cut Shredder (Black)","description":"\u003cp\u003eThe LX210 is the middle model in Fellowes' LX range, and the reason to choose it over the LX200 is time rather than capacity: twenty minutes of continuous running against ten, alongside sixteen sheets a pass instead of twelve. This is the black finish.\u003c\/p\u003e\n\u003cp\u003eThe bin did not change. At 6 gallons it is the same container fitted to the LX200, so a machine that runs twice as long will fill its bin at the same point. That is worth knowing when you are deciding between the LX210 and the LX220, which pairs a thirty-minute cycle with an 8-gallon container.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty minutes of continuous running\u003c\/strong\u003e, double the LX200, with a 15-minute cool-down if you exceed it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm² per particle) — the same head as the LX200 and LX220.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNine-inch (230 mm) paper entry.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples, paper clips and unopened junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-gallon pull-out bin\u003c\/strong\u003e in a 21.06 x 11.69 x 14.13 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26.9 lb\u003c\/strong\u003e, drawing 120 V, 60 Hz, 4.8 A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e20 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 4.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21.06 x 11.69 x 14.13 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e26.9 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips, junk mail — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the LX210 for a home office or a two-person workspace that shreds regularly rather than occasionally. Twenty minutes and sixteen sheets are enough to work through a folder without stopping, and the fine cut gives you a materially smaller fragment than a conventional cross-cut machine at the same DIN level.\u003c\/p\u003e\n\u003cp\u003eDo not buy it expecting the bin to keep up. Six gallons is the same container as the LX200 and it will fill well inside a twenty-minute session; if that will irritate you, the \u003cstrong\u003eLX220\u003c\/strong\u003e adds an 8-gallon bin, four more sheets and another ten minutes of run time. Do not buy it if you need discs destroyed — the LX range does not accept optical media. And if a policy names P-5, none of these machines reach it; the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e does.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995831360,"sku":"5015201","price":417.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/LX210-Black-HeroLeft-Light-100621_da9a403a-4bc0-4f43-b07f-1b4371067970.png?v=1754951515"},{"product_id":"5015501","title":"Powershred LX220 Cross-Cut Shredder (White)","description":"\u003cp\u003eThis is the white LX220, the largest machine in Fellowes' LX range and mechanically identical to the black 5015401. Twenty sheets a pass, thirty minutes of running, an 8-gallon bin and a fine 4 by 12 mm particle.\u003c\/p\u003e\n\u003cp\u003eOf the six LX listings — three models, two colours each — this is the one to pick if you expect the machine to be used by more than one person. It is the only model in the range where the bin was enlarged along with the duty cycle, which is what keeps a longer session from turning into a series of trips to the waste point.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite finish\u003c\/strong\u003e — the same machine as the black 5015401.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThirty minutes of continuous running\u003c\/strong\u003e, with a 15-minute cool-down if exceeded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-gallon pull-out bin\u003c\/strong\u003e, the largest in the LX range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm²).\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNine-inch (230 mm) paper entry.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples, paper clips and unopened junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e23.25 x 11.75 x 16.50 in, 34.2 lb, 120 V, 60 Hz, 5.8 A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e8 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e30 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 5.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e23.25 x 11.75 x 16.50 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips, junk mail — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 8-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the white LX220 for a small office or a shared home workspace where the shredder stands in view and gets used by more than one person. It is the best-balanced machine in the LX range: capacity, duty cycle and bin size all move up together rather than one at a time.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if a department will feed it continuously. Thirty minutes is a cycle, not continuous duty, and the \u003cstrong\u003ePowershred 125Ci\u003c\/strong\u003e is the right class of machine for that. Do not buy it if optical media has to be destroyed — the LX models do not accept CDs or DVDs. And if a policy names P-5 micro-cut in the DIN sense, this is a P-4 machine and the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is the correct answer.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995864128,"sku":"5015501","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/WebOnly_LX220-HeroLeft-Light-120919_1dbaea85-a912-4b40-b82d-c317223d4a50.png?v=1754951517"},{"product_id":"5015401","title":"Powershred LX220 Cross-Cut Shredder (Black)","description":"\u003cp\u003eThe LX220 is the largest of Fellowes' LX shredders and the only one in the range where the bin grows with the duty cycle: thirty minutes of continuous running and an 8-gallon container, against twenty minutes and six gallons on the LX210.\u003c\/p\u003e\n\u003cp\u003eThat pairing is what makes it a small-office machine rather than a desk one. Twenty sheets a pass through a fine 4 by 12 mm head, half an hour of running and a third more bin capacity mean a genuine clear-out can be finished in one sitting. This is the black finish; the same machine is sold in white as 5015501.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThirty minutes of continuous running\u003c\/strong\u003e, the longest in the LX range, with a 15-minute cool-down if exceeded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-gallon pull-out bin\u003c\/strong\u003e — a third more than the LX200 and LX210.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFine 5\/32 x 1\/2 in cut\u003c\/strong\u003e (4 x 12 mm, about 48 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch (230 mm) paper entry\u003c\/strong\u003e for legal and A4 unfolded.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, staples, paper clips and unopened junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e23.25 x 11.75 x 16.50 in cabinet, 34.2 lb.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e120 V, 60 Hz, 5.8 A.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA word on the term micro-cut. Fellowes markets the LX200, LX210 and LX220 as micro-cut shredders, and the cut is genuinely fine at 4 by 12 mm. Under DIN 66399, though, micro-cut begins at P-5 and a particle ceiling of 30 mm²; 4 by 12 mm is about 48 mm², which is P-4. Both statements are true in their own terms, but if a policy names micro-cut and means P-5, none of the LX models will satisfy it. We classify by the standard so the machine files correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIt will not shred CDs or DVDs.\u003c\/strong\u003e Fellowes' manual for the LX200, LX210 and LX220 excludes optical media explicitly, along with adhesive labels, continuous form paper, transparencies, newspaper, cardboard, laminates, file folders, X-rays and plastics other than credit cards. That is a real limitation of the LX range and it is worth checking against your waste stream before you buy: several cheaper cross-cut machines do take discs, and none of these three do.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (Fellowes markets this head as micro-cut — see the note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1\/2 in (4 x 12 mm, about 48 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9 in (230 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e8 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003e30 minutes on; 15-minute cool-down if exceeded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 5.8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e23.25 x 11.75 x 16.50 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, staples, paper clips, junk mail — no CDs or DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes describes the acoustic design as quiet operation but publishes no decibel value for the LX range, so no noise row is shown.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 8-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, applied each time the waste bin is emptied. Aerosol lubricants must never be used in a shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the LX220 for a small office of three or four people, or for one person with a real backlog. Twenty sheets a pass, thirty minutes of running and an 8-gallon bin are matched to each other, which is not true of the smaller LX models, and the fine cut makes it a defensible choice for genuinely sensitive paperwork.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the machine will be fed all day. Thirty minutes is a duty cycle, not continuous duty, and a department that shreds constantly wants a \u003cstrong\u003ePowershred 125Ci\u003c\/strong\u003e or \u003cstrong\u003e225Ci\u003c\/strong\u003e cabinet instead. Do not buy it if you need discs destroyed — the LX models do not take optical media. And if the volume is genuinely small, the \u003cstrong\u003eLX200\u003c\/strong\u003e or \u003cstrong\u003eLX210\u003c\/strong\u003e cost less and take up less room.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995896896,"sku":"5015401","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/LX220-Black-HeroLeft-light_100721_986cb632-2a33-4ae6-b20a-46a90f7f8d46.png?v=1754951520"},{"product_id":"1758500f","title":"GBC ShredMaster Home Shredder, SX15-06, Super Cross-Cut, P-4, 15 Sheets","description":"\u003cp\u003eThe SX15-06 is the model that turns ACCO's ShredMaster range from a personal product into a working one. Fifteen sheets a pass at DIN 66399 P-4 is a useful figure; a 120-minute run time is what makes it usable, because it is twenty times what the PX10-06 below it manages.\u003c\/p\u003e\n\u003cp\u003eThe bin did not grow with the duty cycle. At 6 gallons it is the same container fitted to the ten-sheet models, so a machine that can run for two hours will fill its bin well inside that. Bear that in mind when you are comparing it against the SX20-08, which pairs a longer duty cycle with a larger bin.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e120-minute run time.\u003c\/strong\u003e Two hours of continuous operation, against six minutes on the ten-sheet models in the same range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFifteen sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper cross-cut at 5\/32 x 1 1\/2 in\u003c\/strong\u003e (about 4 x 38 mm, roughly 152 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 58 dB.\u003c\/strong\u003e Quieter than the ten-sheet ShredMaster models despite the larger capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch controls with LED indicators\u003c\/strong\u003e for bin full, door open, overheat and overload.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-reverse jam prevention\u003c\/strong\u003e and an Eco Power Save mode that shuts down after two minutes idle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-gallon pull-out bin\u003c\/strong\u003e in a 14.57 x 11.42 x 19.69 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds through staples and paper clips\u003c\/strong\u003e, two-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACCO's own listing for this model uses the word micro-cut in the product name while describing the head as a super cross-cut and rating it P-4 in the specification table. The geometry settles it: 4 by 38 mm is about 152 mm², which is a P-4 cross-cut particle. DIN 66399 does not recognise micro-cut below P-5, where the ceiling is 30 mm². We have listed the machine by the standard so that it files correctly, and we mention the discrepancy because you will see the other word on the box.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eSuper cross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/2 in (approx. 4 x 38 mm, around 152 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e15 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e120 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003eunder 58 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e14.57 x 11.42 x 19.69 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet capacity is quoted on 20 lb paper, ACCO's stated basis for the ShredMaster range. ACCO does not publish a motor wattage or a shipping weight for every model, so those rows appear only where the manufacturer states them.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 6-gallon pull-out bin and power cord. ACCO's 6-8 gallon plastic shredder bag, part \u003cstrong\u003e1765016\u003c\/strong\u003e, names the SX15-06 on its compatibility list and is sold 100 to a box. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the SX15-06 for a home office or a two-person workspace that shreds in sessions rather than a sheet at a time. Two hours of run time means a backlog can be cleared in one go, fifteen sheets a pass means it does not take all afternoon, and under 58 dB it can run while someone is on the phone in the same room. For the money it is the best-balanced machine in ACCO's personal range.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the bin will annoy you. Six gallons holds roughly 250 sheets of cross-cut waste, so a two-hour session will mean several emptyings; the \u003cstrong\u003eSX20-08\u003c\/strong\u003e gives you an 8-gallon bin, twenty sheets a pass and four hours of run time in a slightly larger cabinet, and for most buyers considering both it is the better long-term choice. Do not buy it if you need a finer cut: the \u003cstrong\u003eSM15-08\u003c\/strong\u003e uses the same cabinet with a roughly 40 mm² particle. And it is not rated for cards or discs, so if those are part of your waste stream you need a Momentum model instead.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912505920,"sku":"1758500F","price":310.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/414276.jpg?v=1754950424"},{"product_id":"1758501f","title":"GBC ShredMaster Home Office Shredder, SM15-08, Cross-Cut Shredder, 15 Sheets","description":"\u003cp\u003eThe SM15-08 is ACCO's fine-cut ShredMaster: fifteen sheets a pass through a fine cross-cut head producing 1\/8 by 1\/2 inch particles, backed by a four-hour run time and an 8-gallon pull-out bin.\u003c\/p\u003e\n\u003cp\u003eIt is also the model in this range where we have to disagree with the manufacturer, and it is worth reading the next paragraph before you buy. ACCO markets the SM15-08 as DIN 66399 P-5. The particle geometry ACCO itself publishes does not support that claim, and we have classified the machine at P-4 as a result.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFifteen sheets per pass\u003c\/strong\u003e on 20 lb paper, unusually high for a fine-cut machine of this size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240-minute run time.\u003c\/strong\u003e Four hours of continuous operation is a commercial-grade figure on a personal-sized cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/8 x 1\/2 in cut\u003c\/strong\u003e (about 3.2 x 12.7 mm, roughly 40 mm² per particle) — a genuinely fine particle by the standards of this price bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 58 dB.\u003c\/strong\u003e Quiet enough for a shared room while it runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch controls with LED status\u003c\/strong\u003e for bin full, door open, overheat and overload, so the machine tells you what is wrong instead of just stopping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-reverse jam prevention\u003c\/strong\u003e and an Eco Power Save mode that shuts the machine down after two minutes of inactivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-gallon pull-out bin\u003c\/strong\u003e, 15.98 x 12.48 x 23.54 in, two-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhy we list this machine as P-4 cross-cut and not P-5 micro-cut.\u003c\/strong\u003e DIN 66399 sets the P-5 ceiling at 30 mm² of particle area and a 2 mm particle width. ACCO publishes the SM15-08's shred size as 1\/8 by 1\/2 inch, which is 3.175 by 12.7 mm, giving roughly 40 mm² on a 3.175 mm width. That is above the P-5 limit on both counts and inside P-4, which is a cross-cut class. ACCO's two published statements about this product — the security level and the shred size — are mutually inconsistent, and we have chosen to publish the one we can check with a ruler.\u003c\/p\u003e\n\u003cp\u003eThis is not a criticism of the machine, which cuts noticeably finer than the P-4 cross-cut models around it and is a genuinely capable shredder. It is a warning about procurement. If your specification names P-5 and someone audits the purchase, a 40 mm² particle will not survive the check. If ACCO can produce a test certificate demonstrating a compliant particle, we will revise this listing; until then, buy it as an excellent P-4 machine rather than a P-5 one.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 as measured; ACCO markets it as P-5 — see the explanation above\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut, DIN class P-4 (ACCO markets this head as micro-cut — see the explanation above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8 x 1\/2 in (approx. 3.2 x 12.7 mm, around 40 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e15 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e8 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003eunder 58 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.98 x 12.48 x 23.54 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet capacity is quoted on 20 lb paper, ACCO's stated basis for the ShredMaster range. ACCO does not publish a motor wattage or a shipping weight for every model, so those rows appear only where the manufacturer states them.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 8-gallon pull-out bin and power cord. ACCO's 6-8 gallon shredder bag, part \u003cstrong\u003e1765016\u003c\/strong\u003e, is the right size for this bin and is listed for the SX20-08, which uses the same 8-gallon container — but ACCO does not print the SM15-08 on that part's compatibility list, so confirm before ordering a box. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e, and a fine-cut head needs it more often than a coarse one.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the SM15-08 if you want the finest cut ACCO offers in a personal-sized ShredMaster and you are not buying against a formal P-5 requirement. At roughly 40 mm² the particle is about a quarter the area of the P-4 cross-cut models in this range, the four-hour run time means it will not stop mid-session, and under 58 dB it can sit in a shared room. For a practice, a small finance team or anyone destroying personal data as a matter of routine, it is a sensible machine.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if a contract, regulator or internal policy names P-5 in writing. The published geometry does not meet the standard, and no amount of manufacturer marketing changes the arithmetic; for a genuine P-5 in ACCO's line you need the \u003cstrong\u003eMomentum M12-12\u003c\/strong\u003e or \u003cstrong\u003eM20-32\u003c\/strong\u003e at roughly 2 x 15 mm, or the commercial \u003cstrong\u003eCM15-30\u003c\/strong\u003e. Do not buy it for volume either — fifteen sheets and 8 gallons is a team machine, not a floor machine. And if you want the same cabinet with more throughput and do not need the finer cut, the \u003cstrong\u003eSX20-08\u003c\/strong\u003e takes twenty sheets at P-4.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912538688,"sku":"1758501F","price":482.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/1758502f.jpg?v=1754950426"},{"product_id":"1758502f","title":"GBC ShredMaster SX20-08 Super Cross-Cut Shredder, P-4, 20 Sheets, 1 - 5 Users","description":"\u003cp\u003eThe SX20-08 is the top of ACCO's personal ShredMaster range and the one that behaves like a small office machine: twenty sheets a pass at DIN 66399 P-4, an 8-gallon pull-out bin and a four-hour run time.\u003c\/p\u003e\n\u003cp\u003eFour hours is the number that separates it from everything below it in the range. The PX10-06 stops after six minutes; the SX15-06 after two hours. The SX20-08 will keep going for a full afternoon, which changes what the machine can be asked to do — a shared shredder for a small team rather than a personal one that happens to be on the floor.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240-minute run time.\u003c\/strong\u003e Four hours of continuous operation, twice the SX15-06 and forty times the ten-sheet models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper cross-cut at 5\/32 x 1 1\/2 in\u003c\/strong\u003e (about 4 x 38 mm, roughly 152 mm²), the standard commercial level for confidential business records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-gallon pull-out bin\u003c\/strong\u003e, a third more than the SX15-06.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 58 dB\u003c\/strong\u003e with ACCO's Whisper Shred arrangement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch controls with LED indicators\u003c\/strong\u003e for bin full, door open, overheat and overload.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-reverse jam prevention\u003c\/strong\u003e and an Eco Power Save shutdown after two minutes idle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for one to five users\u003c\/strong\u003e, in a 15.98 x 12.48 x 23.54 in cabinet, with a two-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eACCO rates this machine for one to five users, which is a more useful figure than it looks. A user rating is really a statement about duty cycle and bin size together: it assumes each person contributes a normal office volume of paper and that neither the motor nor the container becomes the bottleneck. Five people is the point at which the 8-gallon bin starts needing daily attention rather than weekly.\u003c\/p\u003e\n\u003cp\u003eAs with the rest of the personal ShredMaster range, ACCO's own listing describes this head as micro-cut in the product name while the specification table says super cross-cut and P-4. The particle is around 152 mm², which is a P-4 cross-cut, and that is how we have classified it. If your specification says micro-cut and means P-5, this machine does not meet it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eSuper cross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/2 in (approx. 4 x 38 mm, around 152 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e8 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003eunder 58 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15.98 x 12.48 x 23.54 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRecommended users\u003c\/th\u003e\n\u003ctd\u003e1 to 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet capacity is quoted on 20 lb paper, ACCO's stated basis for the ShredMaster range. ACCO does not publish a motor wattage or a shipping weight for every model, so those rows appear only where the manufacturer states them.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 8-gallon pull-out bin and power cord. ACCO's 6-8 gallon plastic shredder bag, part \u003cstrong\u003e1765016\u003c\/strong\u003e, names the SX20-08 on its compatibility list and is sold 100 to a box. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the SX20-08 for a small office of up to five people, or for one person with a genuine backlog. The four-hour duty cycle means a records clear-out can be done in a single session, twenty sheets a pass keeps it moving, and at under 58 dB it will not drive anyone out of the room. It is the machine in ACCO's personal range that most people who think they want a commercial shredder actually need.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if your material includes credit cards, CDs or DVDs — this head is rated for paper, staples and paper clips only, and the \u003cstrong\u003eMomentum X18-12\u003c\/strong\u003e or \u003cstrong\u003eX22-23\u003c\/strong\u003e are the models rated for hard media. Do not buy it if a policy names P-5 or micro-cut in the DIN sense; the honest answers there are the \u003cstrong\u003eMomentum M12-12\u003c\/strong\u003e or \u003cstrong\u003eM20-32\u003c\/strong\u003e. And if more than five people will share it, the bin becomes the problem before the motor does — a Momentum cabinet with a 12- or 23-gallon container is the better fit.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912604224,"sku":"1758502F","price":424.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/414182.jpg?v=1754950428"},{"product_id":"wsm1757601","title":"GBC AutoFeed+ Home Shredder, 60X, Super Cross-Cut, P-4, 60 Sheets","description":"\u003cp\u003eThe AutoFeed+ 60X is the smallest machine ACCO builds around the idea that nobody should have to stand at a shredder. Sixty sheets go into the locking hopper, the lid closes, and the machine feeds and destroys the stack on its own while you do something else.\u003c\/p\u003e\n\u003cp\u003eEverything else in the AutoFeed+ range is a larger version of this. What sets the 60X apart is that it is sized for one desk rather than one department: a 5.25-gallon bin, a 16-inch-tall cabinet and a ten-minute run time that is matched to the hopper rather than to a working day. It is the right machine when the volume is a few handfuls of paper a week and the real problem is that the shredding never gets done.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-sheet locking hopper.\u003c\/strong\u003e Load it, close the lid, walk away. The lock matters more than it sounds: paper waiting to be destroyed is paper sitting in the open, and a hopper that latches turns the shredder into a temporary secure container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-sheet manual feed slot\u003c\/strong\u003e for the single page, the folded receipt or the expired card you do not want to open the hopper for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm² per particle) — comfortably inside the 160 mm² the class allows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e, so incoming mail and stapled sets go straight in. Credit cards go through the manual slot rather than the hopper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB operation.\u003c\/strong\u003e Quiet enough to run beside you while you take a call, which is the practical test for a machine that lives in a home office.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-gallon pull-out bin\u003c\/strong\u003e in a 15 x 17 x 16 in cabinet — small enough to sit under a side table.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-minute run time\u003c\/strong\u003e, sized to clear a full hopper in one go.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e60 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e6 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e5.25 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e10 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 in W x 17 in D x 16 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 5.25-gallon pull-out bin and power cord. Shred bags are not included. ACCO lists part \u003cstrong\u003e1765016\u003c\/strong\u003e (6-8 gallon plastic shredder bags) as the correct liner for the 60X. Shredder oil is also separate; ACCO part \u003cstrong\u003e1760049\u003c\/strong\u003e is the 16 oz bottle.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 60X if you are one person with a steady trickle of confidential paper — bank statements, client correspondence, medical letters, old tax records — and the honest reason it has not been shredded is that feeding a desktop machine sheet by sheet is tedious. P-4 is the ordinary commercial standard for business records, and an automatic hopper is the feature that actually changes behaviour.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for a shared office. Sixty sheets is a small stack and 5.25 gallons of cross-cut waste fills faster than you would expect; two or three people feeding it will spend their time emptying the bin. The \u003cstrong\u003eAutoFeed+ 150X\u003c\/strong\u003e and \u003cstrong\u003e230X\u003c\/strong\u003e are the same machine with bigger hoppers, longer run times and 11.6- and 16-gallon bins. Do not buy it either if a contract or regulator has named P-5 or micro-cut in the strict DIN sense — no 60X variant is offered at P-5, so the smallest answer there is the \u003cstrong\u003eAutoFeed+ 100M\u003c\/strong\u003e at 2 x 15 mm.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912866368,"sku":"WSM1757601","price":347.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457210.jpg?v=1754950439"},{"product_id":"wsm1757602","title":"GBC AutoFeed+ Home Office Shredder, 100X, Super Cross-Cut, P-4, 100 Sheets","description":"\u003cp\u003eThe AutoFeed+ 100X is the value entry to GBC's auto-feed range: load 100 sheets into the hopper, close the lid, and the machine feeds and destroys them without anyone standing over it. It is mechanically the twin of the AutoFeed+ 100M - same 9-gallon bin, same 20-minute run time, same 15 by 17 inch footprint - and differs in exactly one respect, the cutting head. The 100X produces 5\/32 x 1 3\/16 inch particles, which is DIN 66399 level P-4.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-sheet automatic hopper.\u003c\/strong\u003e The reason to buy an auto-feed shredder at all: paper gets destroyed because nobody has to feed it by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 security, roughly 120 mm2 per particle.\u003c\/strong\u003e P-4 is the standard commercial level for confidential business records, comfortably inside the 160 mm2 the class permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-sheet manual feed slot\u003c\/strong\u003e - two more than the 100M manages - for single sheets, cards and creased paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples, paper clips and credit cards\u003c\/strong\u003e, so mail and old cards need no pre-sorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e operation, quiet enough to run beside a desk while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 15 x 17 x 21 inch cabinet\u003c\/strong\u003e with a 9-gallon pull-out bin, sized for a home office or a small workspace.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 minutes of run time\u003c\/strong\u003e, matched to the hopper capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut - see note below)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e100 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e8 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e9 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 x 17 x 21 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the term micro-cut.\u003c\/strong\u003e ACCO's own literature describes the 100X as micro-cut while also rating it P-4. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes, P-3 and P-4; micro-cut begins at P-5, where particles must be 30 mm2 or smaller. Both statements about this machine are true in their own terms, but if your procurement specification says micro-cut and means P-5, the 100X will not satisfy it - the AutoFeed+ 100M will. We have classified it by the DIN standard rather than the marketing term so it files correctly.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 9-gallon pull-out bin and power cord. Shred bags are not included, and ACCO publishes no bag part number for this bin.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe 100X is the right pick for a home office or small workspace where the goal is that confidential paper actually gets shredded rather than piling up in a box. P-4 meets the ordinary commercial standard for business records, and at this price the automatic hopper is the feature that changes behaviour. If nobody has specified a security level to you in writing, this is very likely enough.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if a policy, a client contract or a regulator has named P-5 or micro-cut in the strict DIN sense. The \u003cstrong\u003eAutoFeed+ 100M\u003c\/strong\u003e is the identical machine with a 2 x 15 mm head at P-5 - same hopper, same bin, same footprint - and is the direct answer. Do not buy it for volume either: 100 sheets and a 9-gallon bin is a personal-scale machine, and the \u003cstrong\u003e150X\u003c\/strong\u003e, \u003cstrong\u003e230X\u003c\/strong\u003e and \u003cstrong\u003e300X\u003c\/strong\u003e step up through the same P-4 cut with larger hoppers and bins. And if several people will use it through the day, an auto-feed desktop unit is the wrong category - a continuous-duty cabinet such as the CX22-44 is built for that.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912964672,"sku":"WSM1757602","price":418.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/486211_12c42efa-ef63-4acf-a54e-4216927e0843.jpg?v=1754950442"},{"product_id":"wsm1757603","title":"GBC AutoFeed Plus 100M Shredder","description":"\u003cp\u003eThe AutoFeed+ 100M is built around a simple idea: you should not have to stand at a shredder. Load up to 100 sheets into the locking hopper, close the lid and walk away - the machine feeds and destroys them on its own. What distinguishes the 100M from the otherwise identical 100X is the cutting head. It produces 2 x 15 mm particles at DIN 66399 level P-5, five times finer than the P-4 the X model manages, on the same 9-gallon cabinet.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-sheet automatic hopper.\u003c\/strong\u003e Load, close, walk away. The shredder feeds the stack itself, which is the whole reason this category exists - most desktop shredders fail not because they are slow but because nobody wants to stand over them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro-cut at 2 x 15 mm.\u003c\/strong\u003e Thirty square millimetres per particle, exactly at the DIN P-5 limit. That is the level most commonly named when an internal policy wants clear headroom above the P-4 commercial baseline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual feed slot for 6 sheets\u003c\/strong\u003e, for the single sheet or the folded receipt you do not want to open the hopper for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples, paper clips and credit cards\u003c\/strong\u003e, so incoming mail and old cards do not need pre-sorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB operation\u003c\/strong\u003e - quiet enough to leave running in a home office or a shared room while you work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 minutes of continuous run time\u003c\/strong\u003e, which is matched to the hopper: a full 100-sheet load finishes well inside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9-gallon pull-out bin\u003c\/strong\u003e on a compact 15 by 17 by 21 inch footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32 x 5\/8 in (2 x 15 mm, 30 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e100 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e6 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e9 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 x 17 x 21 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eACCO does not publish a basis weight for the auto-feed and manual-feed sheet figures, a shipping weight, or a motor wattage for this model, so those rows are omitted rather than estimated. Sheet ratings in this category are normally quoted on lighter paper than US 20 lb bond.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, pull-out 9-gallon bin and power cord. Shred bags are not included, and ACCO does not publish a bag part number for this bin.\u003c\/p\u003e\n\n\u003ch2\u003eSetting It Up\u003c\/h2\u003e\n\u003cp\u003eThe cabinet occupies 15 by 17 inches and stands 21 inches tall, so it fits beside a desk or under a side table rather than needing its own corner. Give the back and sides a few inches of clearance for airflow, and keep the bin accessible from the front - emptying is the one routine task on this machine, and a unit wedged into a tight gap tends to get emptied late. Bin liners are the only real consumable.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe 100M suits a home office, a one- or two-person practice, or an executive who accumulates a modest but genuinely sensitive stack of paper - client files, medical paperwork, financial statements - and wants it destroyed to P-5 without standing there. Choose the M over the X specifically because of the particle size; if security were not the point, the cheaper option would do.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for volume. One hundred sheets is a good afternoon's paper, not a filing cabinet, and the 9-gallon bin fills quickly with micro-cut waste. If you routinely have more, the \u003cstrong\u003eAutoFeed+ 150M\u003c\/strong\u003e and \u003cstrong\u003e230M\u003c\/strong\u003e step up to 150 and 230 sheets with 11.6 and 16-gallon bins at the same P-5 security, and the \u003cstrong\u003e300M\u003c\/strong\u003e triples both the hopper and the run time. If you would rather have capacity than particle size, the \u003cstrong\u003eAutoFeed+ 100X\u003c\/strong\u003e is the same machine at P-4 with a slightly higher 8-sheet manual feed. And if several people will share it all day, an auto-feed desktop machine is the wrong category entirely - a continuous-duty commercial cabinet such as the CX34-44 is the honest answer.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698912997440,"sku":"WSM1757603","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/486211.jpg?v=1754950444"},{"product_id":"wsm1757604","title":"GBC AutoFeed+ Home Office Shredder, 150X, Super Cross-Cut, P-4, 150 Sheets","description":"\u003cp\u003eThe AutoFeed+ 150X is the model most home offices should look at first: it holds two and a half times what the 60X does, runs three times as long, and still fits in the same 15 by 17 inch floor space.\u003c\/p\u003e\n\u003cp\u003eThe difference is height. ACCO kept the footprint and stretched the cabinet to 25 inches to fit an 11.6-gallon bin under the same hopper mechanism, so a machine that occupies no more of your floor holds roughly twice the waste. If you have ever abandoned a shredding session because the bin filled halfway through, that is the specification that matters.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-sheet locking hopper.\u003c\/strong\u003e Enough for a full folder of correspondence or a year of statements in one load, closed and left to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-sheet manual feed slot\u003c\/strong\u003e for single pages, cards and creased paper that would not feed cleanly from a stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm²). The same cutting head as every other X model in the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThirty-minute run time\u003c\/strong\u003e, three times the 60X, which is what makes a 150-sheet load practical rather than theoretical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11.6-gallon pull-out bin\u003c\/strong\u003e in a 15 x 17 x 25 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e in the hopper; credit cards through the manual slot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB.\u003c\/strong\u003e No louder than the 60X despite the larger load.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e150 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e8 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e11.6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 in W x 17 in D x 25 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 11.6-gallon pull-out bin and power cord. Bags are not included, and ACCO does not name a bag part number for the 11.6-gallon bin — its published sizes jump from 6-8 gallon (part 1765016) to 13-19 gallon (part 1765010). Ask us before ordering rather than guessing from a neighbouring model.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 150X if one or two people generate a folder of confidential paper a month and you want to deal with it in a single sitting. The combination of a 150-sheet hopper and a 30-minute run time means one load, one walk away, one bin check. For a home office, a small practice or an executive's room, this is the size that stops shredding from being a chore you defer.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the room is shared by more than about three people; at that point the \u003cstrong\u003eAutoFeed+ 230X\u003c\/strong\u003e or \u003cstrong\u003e300X\u003c\/strong\u003e with their 16-gallon bins and 30- to 60-minute run times are better matched, and the \u003cstrong\u003e600X\u003c\/strong\u003e is the answer for a floor. Do not buy it if a policy names P-5: the \u003cstrong\u003eAutoFeed+ 150M\u003c\/strong\u003e is the identical cabinet with a 2 x 15 mm micro-cut head, and it is the direct substitute. And if you need to destroy CDs or DVDs, no AutoFeed+ model is rated for optical media — that needs a different machine.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913062976,"sku":"WSM1757604","price":545.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/486197_9d7b8cd7-71a7-4264-8f30-7f76f21c0eb0.jpg?v=1754950446"},{"product_id":"wsm1757605","title":"GBC AutoFeed Plus 150M Shredder","description":"\u003cp\u003eHalf a step up from the 100M, the AutoFeed+ 150M keeps the same P-5 micro-cut head and the same narrow 15-inch footprint but adds fifty sheets to the hopper, two and a half gallons to the bin and ten minutes to the run time. It is the model to choose when one hopper load per session is not quite enough - a small practice, a two- or three-person office, or a home worker who lets paperwork accumulate for a week before dealing with it.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150-sheet auto-feed hopper.\u003c\/strong\u003e Fifty percent more per load than the 100M, which in practice is the difference between one loading and two.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro-cut, 2 x 15 mm.\u003c\/strong\u003e Thirty square millimetres per particle - the DIN 66399 P-5 ceiling, and a genuine step above the P-4 that most office shredders offer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 minutes of continuous run time\u003c\/strong\u003e, matched to the larger hopper so a full load runs through in one go.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11.6-gallon bin\u003c\/strong\u003e without widening the cabinet - the 150M is 15 by 17 inches like the 100M, just four inches taller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-sheet manual slot\u003c\/strong\u003e, 9 inches wide, for one-offs that do not justify opening the hopper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTakes staples, paper clips and credit cards\u003c\/strong\u003e without pre-sorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e, quiet enough to run in an occupied room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32 x 5\/8 in (2 x 15 mm, 30 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e150 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e6 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e11.6 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 x 17 x 25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eACCO does not publish a basis weight for the auto-feed and manual-feed sheet figures, a shipping weight, or a motor wattage for this model, so those rows are omitted rather than estimated. Sheet ratings in this category are normally quoted on lighter paper than US 20 lb bond.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 11.6-gallon pull-out bin and power cord. Shred bags are not supplied and no bag part number is published for this bin.\u003c\/p\u003e\n\n\u003ch2\u003eSetting It Up and Living With It\u003c\/h2\u003e\n\u003cp\u003eThe 150M is the same 15 by 17 inch footprint as the 100M but four inches taller, at 25 inches, which is worth checking if it is going under a shelf or a desk return. Leave clearance behind and to the sides for airflow, and keep the front clear so the bin pulls out cleanly.\u003c\/p\u003e\n\u003cp\u003eDay to day, two habits make the most difference. Flatten creased paper before it goes into the hopper, since folds are the single most common cause of misfeeds in any auto-feed shredder. And compress the waste in the bin occasionally - P-5 micro-cut output is fine and slow to settle, so a bin that looks full often is not. Bin liners are the only consumable ACCO expects you to buy, and they are not included with the machine.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 150M if you have identified P-5 as your requirement and you shred in weekly batches rather than daily handfuls. The extra hopper capacity and the 30-minute run time mean a week's accumulated paper generally goes in as one load, which is the behaviour that makes an auto-feed shredder worth owning. The taller-but-not-wider cabinet also fits the same desk-side gap as the 100M.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you only shred a few sheets at a time - the \u003cstrong\u003eAutoFeed+ 100M\u003c\/strong\u003e is the same machine, same cut, in a shorter cabinet for less money. Do not buy it if your batches are really document-box sized; the \u003cstrong\u003e230M\u003c\/strong\u003e and \u003cstrong\u003e300M\u003c\/strong\u003e move to a 16-gallon bin and, in the 300M's case, a 60-minute run time, which is a different class of session. And if P-5 is not actually required, the X-series equivalents deliver more sheets per dollar at P-4. Finally, this is not a machine for a shared office floor: no auto-feed desktop shredder is rated for continuous multi-user duty, and a commercial cabinet such as the CX22-44 is the right tool for that.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913128512,"sku":"WSM1757605","price":579.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/486197.jpg?v=1754950448"},{"product_id":"wsm1757606","title":"GBC AutoFeed+ Small Office Shredder, 230X, Super Cross-Cut, P-4, 230 Sheets","description":"\u003cp\u003eThe AutoFeed+ 230X is the point in the range where the machine stops being a personal appliance and starts being shared. A 230-sheet hopper and a 16-gallon bin are enough for a small team's week, and the manual slot steps up to ten sheets.\u003c\/p\u003e\n\u003cp\u003eIt is worth being clear about what the extra capacity does and does not buy. The cutting head, the noise level and the P-4 security are identical to the 60X and 150X; what changes is how much you can put in before you have to come back. If two or three people are dropping paper into the same machine, that is exactly the specification that determines whether it gets used.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e230-sheet locking hopper.\u003c\/strong\u003e Roughly half a ream, loaded and left.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-sheet manual feed slot\u003c\/strong\u003e — two more than the 150X — for single sheets, cards and anything too creased to feed from a stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm²), the standard commercial level for confidential business records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gallon pull-out bin\u003c\/strong\u003e, nearly a 40 percent increase on the 150X.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThirty-minute run time.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e from the hopper; credit cards through the manual slot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e, quiet enough for a shared room rather than a corridor.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e230 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17 in W x 19 in D x 29 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case. ACCO's brochure and our supplier data disagree on the cabinet width by two inches; we have published the brochure figure.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 16-gallon pull-out bin and power cord. Bags are separate. ACCO names part \u003cstrong\u003e1765010\u003c\/strong\u003e (13-19 gallon plastic shredder bags, 25 to a box) for its 300X and 300M, which use the same 16-gallon bin size; ACCO does not explicitly list the 230X against that part, so check the fit before committing to a case.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 230X for a two- to four-person office, a reception desk that handles incoming mail, or a practice manager who collects a department's confidential paper and clears it in batches. The 16-gallon bin is the real upgrade: at P-4 the waste is bulky, and a bin you empty weekly rather than daily is the difference between a machine people use and one they queue at.\u003c\/p\u003e\n\u003cp\u003eDo not buy it as a floor shredder. Two hundred and thirty sheets is a batch, not a day's output for a busy department, and the 30-minute run time is a hard ceiling; the \u003cstrong\u003eAutoFeed+ 600X\u003c\/strong\u003e quadruples both. Do not buy it if you need P-5 — there is no 230M in the current range, so the nearest micro-cut answers are the \u003cstrong\u003eAutoFeed+ 300M\u003c\/strong\u003e above it or the \u003cstrong\u003e150M\u003c\/strong\u003e below. And if your material includes CDs, DVDs or hard media, this range does not handle them at all.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913161280,"sku":"WSM1757606","price":619.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457245_cbd8610a-15ea-4043-b60b-9b8e9537a3a8.jpg?v=1754950450"},{"product_id":"wsm1757607","title":"GBC AutoFeed Plus 230M Shredder","description":"\u003cp\u003eAt 230 sheets per load the AutoFeed+ 230M is where this range stops being a personal shredder and starts being a small-office one. It keeps the P-5 micro-cut head that runs through the whole M-series - 2 x 15 mm particles, 30 mm2 - but pairs it with a 16-gallon bin and an eight-sheet manual slot, up from six on the 100M and 150M. A full ream is 500 sheets, so roughly half a ream goes in at a time and shreds while you get on with something else.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e230-sheet hopper.\u003c\/strong\u003e Close to half a ream in one load. For most small offices that is a week's confidential paper handled in a single unattended run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro-cut at 2 x 15 mm.\u003c\/strong\u003e Identical security to the smaller M models - 30 mm2 particles, at the DIN 66399 P-5 limit and well inside the 160 mm2 that P-4 permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gallon bin\u003c\/strong\u003e, nearly double the 100M's, which is the specification that actually changes how often someone has to deal with the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-sheet manual feed slot\u003c\/strong\u003e at 9 inches wide, for single documents, cards and anything creased.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e30 minutes of continuous run time.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles staples, paper clips and credit cards\u003c\/strong\u003e straight from the tray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e, the same as the rest of the range - it can sit in an occupied room.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32 x 5\/8 in (2 x 15 mm, 30 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e230 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e8 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e15 x 19 x 29 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eACCO does not publish a basis weight for the auto-feed and manual-feed sheet figures, a shipping weight, or a motor wattage for this model, so those rows are omitted rather than estimated. Sheet ratings in this category are normally quoted on lighter paper than US 20 lb bond.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 16-gallon pull-out bin and power cord. Shred bags are not included and ACCO publishes no liner part number for this bin.\u003c\/p\u003e\n\n\u003ch2\u003eSetting It Up and Living With It\u003c\/h2\u003e\n\u003cp\u003eAt 15 by 19 inches and 29 inches tall the 230M is a floor-standing unit rather than a desk-side one, and it needs to be reachable from the front so the 16-gallon bin can be pulled clear without moving the machine. Allow airflow clearance at the back and sides.\u003c\/p\u003e\n\u003cp\u003eThe two habits that keep an auto-feed shredder working are flattening creased paper before loading and pressing down the waste in the bin now and then. Micro-cut output is fine and does not settle on its own, so bins in this class routinely look full when they are not. Liners are the only regular consumable and are not supplied with the machine.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThis is the sensible choice for a small professional office - three to eight people - where confidential paper accumulates steadily and someone has to deal with it weekly. The combination of a large hopper, P-5 security and a bin that does not need emptying after every load is what makes the machine stay in use rather than becoming an obstacle in the corner.\u003c\/p\u003e\n\u003cp\u003eDo not buy it expecting continuous shared duty. Thirty minutes of run time is generous for batch work but it is not the same thing as the continuous rating on a commercial cabinet like the \u003cstrong\u003eCX22-44\u003c\/strong\u003e, and if a dozen people are walking up to it through the day you have bought the wrong category. If your batches are consistently larger, the \u003cstrong\u003eAutoFeed+ 300M\u003c\/strong\u003e uses the same 16-gallon bin but raises the hopper to 300 sheets and doubles the run time to 60 minutes, which is a much better fit for genuine bulk sessions. If your batches are smaller, the \u003cstrong\u003e150M\u003c\/strong\u003e saves both money and floor space at the same P-5 cut. And if P-5 is more security than your policy requires, the X-series equivalents give more sheets for the money at P-4.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913259584,"sku":"WSM1757607","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457245.jpg?v=1754950452"},{"product_id":"wsm1757608","title":"GBC AutoFeed+ Office Shredder, 300X, Super Cross-Cut, P-4, 300 Sheets","description":"\u003cp\u003eThe AutoFeed+ 300X is the longest-running machine in the small-cabinet half of the range: sixty minutes of continuous operation against thirty on the 230X, from the same 17 by 19 inch footprint and the same 16-gallon bin.\u003c\/p\u003e\n\u003cp\u003eThat hour is the specification to buy this model for. The hopper holds 300 sheets, but the reason it can clear them in one uninterrupted session is the doubled run time. On the 230X a big clear-out can hit the thermal limit before the hopper empties; on the 300X it does not.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-sheet locking hopper\u003c\/strong\u003e — over half a ream in one load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixty-minute run time\u003c\/strong\u003e, double the 230X and the longest of the small-cabinet AutoFeed+ models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-sheet manual feed slot\u003c\/strong\u003e for singles, cards and creased sheets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gallon pull-out bin\u003c\/strong\u003e in a 17 x 19 x 29 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e from the hopper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e — no penalty in noise for the longer duty.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e300 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17 in W x 19 in D x 29 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 16-gallon pull-out bin and power cord. Bags are separate: ACCO names part \u003cstrong\u003e1765010\u003c\/strong\u003e, its 13-19 gallon plastic shredder bag, 25 to a box, specifically for the 300X and 300M. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 300X if a small department clears paper in scheduled batches — end of month, end of matter, end of audit — and you want the whole batch gone in one session without babysitting. The hour of run time and the 300-sheet hopper are matched to each other, which is not true of every model in the range, and the named bag part makes consumables straightforward.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the bin is your bottleneck. The 300X carries exactly the same 16 gallons as the smaller 230X, so a doubled hopper does not mean fewer trips to empty — if anything you will empty it more often. Where bin size is the problem, the \u003cstrong\u003eAutoFeed+ 600X\u003c\/strong\u003e steps to 29 gallons and four hours of run time on a larger cabinet. Do not buy it if a policy names P-5 or micro-cut in the DIN sense; the \u003cstrong\u003eAutoFeed+ 300M\u003c\/strong\u003e is this machine with a 2 x 15 mm head. And no AutoFeed+ model handles optical media.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913292352,"sku":"WSM1757608","price":674.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457252_8e90f170-686c-4d1c-8554-4d988ff1fe1f.jpg?v=1754950454"},{"product_id":"wsm1757609","title":"GBC AutoFeed Plus 300M Shredder","description":"\u003cp\u003eSixty minutes of continuous run time is what makes the AutoFeed+ 300M different from everything below it in this range. The 100M, 150M and 230M are all rated at 20 or 30 minutes, which is enough for one hopper load; the 300M doubles that, and pairs it with a 300-sheet hopper. It is the model for people who shred in real sessions - clearing out a filing cabinet, closing a client matter, doing an annual records purge - rather than dealing with a day's paper.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-sheet auto-feed hopper.\u003c\/strong\u003e More than half a ream in one load, shredded without anyone standing at the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-minute run time\u003c\/strong\u003e - double the 230M's and triple the 100M's. This is the specification that lets you run consecutive loads rather than one and then a wait.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro-cut at 2 x 15 mm\u003c\/strong\u003e, 30 mm2 per particle, unchanged from the rest of the M-series. Capacity is what you are buying here, not extra security.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gallon bin\u003c\/strong\u003e, the same as the 230M, which is worth knowing: the 300M holds more paper per load but not more waste per empty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-sheet manual feed slot\u003c\/strong\u003e, 9 inches wide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStaples, paper clips and credit cards\u003c\/strong\u003e all supported.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e - the same quiet rating as the smaller models, which matters more on a machine intended to run for an hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32 x 5\/8 in (2 x 15 mm, 30 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e300 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e8 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e60 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e17 x 19 x 29 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003cp\u003eACCO does not publish a basis weight for the auto-feed and manual-feed sheet figures, a shipping weight, or a motor wattage for this model, so those rows are omitted rather than estimated. Sheet ratings in this category are normally quoted on lighter paper than US 20 lb bond.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 16-gallon pull-out bin and power cord. Shred bags are not included and no bag part number is published for this bin.\u003c\/p\u003e\n\n\u003ch2\u003eSetting It Up and Living With It\u003c\/h2\u003e\n\u003cp\u003eThe 300M is the largest cabinet in this group at 17 by 19 inches and 29 inches tall, and it is designed to stand on the floor with clear access from the front. The bin is the part you will interact with most, so leave enough room to pull it fully out rather than tipping it.\u003c\/p\u003e\n\u003cp\u003eBecause the hopper is large and the bin is not proportionally larger, the practical rhythm on this model is: load, run, check the bin, reload. Flatten anything creased before it goes in - folded sheets read as doubles to the feed mechanism and are the usual cause of a stalled load - and press the waste down before deciding the bin needs emptying, since micro-cut particles settle slowly. Bin liners are the only consumable and are not included.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 300M if you shred in sittings. A law firm closing files, an accountancy practice after tax season, a clinic running an annual records purge - these are hour-long jobs, and the 60-minute rating plus the 300-sheet hopper means you can start it and come back. At P-5 it also satisfies the stricter end of commercial destruction policies without moving to a commercial cabinet.\u003c\/p\u003e\n\u003cp\u003eDo not buy it on hopper size alone. The bin is 16 gallons, exactly the same as the \u003cstrong\u003eAutoFeed+ 230M\u003c\/strong\u003e, so the 300M fills its bin faster relative to its hopper - you will be emptying between loads, not after them. If your sessions are shorter, the 230M is the same security at less cost and a slightly smaller footprint. If they are shorter still, the \u003cstrong\u003e150M\u003c\/strong\u003e or \u003cstrong\u003e100M\u003c\/strong\u003e are the honest answers. And if the requirement is a machine several people use continuously through the working day, no AutoFeed+ model is rated for that; a continuous-duty commercial shredder such as the \u003cstrong\u003eCX34-44\u003c\/strong\u003e or \u003cstrong\u003eCX40-59\u003c\/strong\u003e is the correct category, at P-4 and P-3 respectively.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913390656,"sku":"WSM1757609","price":746.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457252.jpg?v=1754950456"},{"product_id":"wsm1757510","title":"GBC AutoFeed+ Office Shredder, 600X, Super Cross-Cut, P-4, 600 Sheets","description":"\u003cp\u003eThe AutoFeed+ 600X is where this range becomes a departmental machine. Six hundred sheets in the hopper, a fifteen-sheet manual slot, a 29-gallon bin and — the figure that changes everything — four hours of run time rather than one.\u003c\/p\u003e\n\u003cp\u003eFour hours is not a bigger version of sixty minutes; it is a different kind of product. A 300X clears a batch and then rests. A 600X can be loaded in the morning, loaded again after lunch and still be inside its duty budget. That, plus ACCO's two-year onsite warranty on this cabinet, is what separates the large-office models from the desk-side ones.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-sheet locking hopper.\u003c\/strong\u003e A full ream and more, loaded once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240-minute run time.\u003c\/strong\u003e Four hours, against 60 on the 300X. This is the specification that makes the 600X a shared-floor machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFifteen-sheet manual feed slot\u003c\/strong\u003e for anything that should not go in the hopper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm²), the ordinary commercial standard for confidential records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29-gallon pull-out bin\u003c\/strong\u003e — nearly double the 300X — in a 21 x 23 x 38 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB.\u003c\/strong\u003e Notably quiet for a machine of this capacity, and quieter than the larger 750X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e without pre-sorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-year onsite warranty\u003c\/strong\u003e, which matters on a cabinet nobody wants to box up and ship.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e600 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e15 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21 in W x 23 in D x 38 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years, onsite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 29-gallon pull-out bin and power cord. Bags are separate: ACCO's \u003cstrong\u003e1765015\u003c\/strong\u003e 30-gallon plastic shredder bag, 25 to a box, names the 600X on its compatibility list. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 600X for a floor, a records room or a department that shreds every day. The four-hour duty cycle and the 29-gallon bin mean it can absorb a team's output without anyone timing their run, and at 55 dB it can live in a shared space rather than being exiled to a corridor. The onsite warranty is worth reading closely if you are comparing on price alone.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if the hopper is the constraint rather than the duty cycle: the \u003cstrong\u003eAutoFeed+ 750X\u003c\/strong\u003e adds 150 sheets, a 37-gallon bin and a 20-sheet manual slot on the same four hours, at the cost of seven decibels. Do not buy it if you need P-5 — the \u003cstrong\u003eAutoFeed+ 600M\u003c\/strong\u003e is the identical cabinet with a 2 x 15 mm micro-cut head. And if you need genuinely continuous, all-day destruction with a wide throat for whole file boxes, an auto-feed hopper is the wrong architecture; a commercial cabinet such as the \u003cstrong\u003eGBC CX34-44\u003c\/strong\u003e is built for that.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913456192,"sku":"WSM1757510","price":1621.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457258.jpg?v=1754950458"},{"product_id":"wsm1757611","title":"GBC AutoFeed+ Office Shredder, 600M, Micro-Cut, 600 Sheets","description":"\u003cp\u003eThe AutoFeed+ 600M is the 600X with a finer cutting head, and that one substitution changes what the machine is for. At 2 x 15 mm it produces 30 mm² particles — exactly the DIN 66399 P-5 limit — which is four times finer than the P-4 the X model manages.\u003c\/p\u003e\n\u003cp\u003eEverything else is the same cabinet: a 600-sheet hopper, four hours of run time, a 29-gallon bin, 55 dB and a two-year onsite warranty. You give up five sheets on the manual slot, which is the only functional cost of the upgrade. If your department handles personnel files, medical paperwork or financial account data, this is the model in the range to specify.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 micro-cut at 3\/32 x 5\/8 in\u003c\/strong\u003e (2 x 15 mm, 30 mm² per particle). The level most often named when a policy wants clear headroom above the P-4 commercial baseline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-sheet locking hopper.\u003c\/strong\u003e Load a ream, close the lid, walk away.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240-minute run time.\u003c\/strong\u003e Four hours, which is what makes a machine of this hopper size usable by a whole department rather than one person.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen-sheet manual feed slot\u003c\/strong\u003e for singles, cards and creased sheets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29-gallon pull-out bin.\u003c\/strong\u003e Micro-cut waste is finer and packs better than cross-cut, so the bin goes further here than on the 600X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e from the hopper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 dB\u003c\/strong\u003e in a 21 x 23 x 38 in cabinet.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year onsite warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32 x 5\/8 in (2 x 15 mm, 30 mm² per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e600 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e55 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21 in W x 23 in D x 38 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years, onsite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 29-gallon pull-out bin and power cord. ACCO's \u003cstrong\u003e1765015\u003c\/strong\u003e 30-gallon shredder bag (25 per box) lists the 600M by name. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e; on a P-5 head, regular oiling matters more than it does at P-4, because finer particles mean more dust in the cutters.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 600M when the security level is written down somewhere. HR departments, clinical practices, finance teams and legal support functions routinely work to P-5, and this is the largest-capacity way to meet it without moving to a commercial cabinet. Four hours of duty and a 600-sheet hopper mean the higher security costs you nothing in throughput compared with the X model.\u003c\/p\u003e\n\u003cp\u003eDo not pay for it if nobody has asked for P-5. The \u003cstrong\u003eAutoFeed+ 600X\u003c\/strong\u003e is the same machine at P-4, takes fifteen sheets in the manual slot instead of ten, and will satisfy most ordinary commercial destruction policies. Do not buy it if you need more hopper: the \u003cstrong\u003eAutoFeed+ 750M\u003c\/strong\u003e adds 150 sheets and a 37-gallon bin at the same P-5. And if you need P-6 or P-7, no auto-feed machine will do — that is high-security territory, with sheet capacities in single figures.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913521728,"sku":"WSM1757611","price":1955.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457257.jpg?v=1754950460"},{"product_id":"wsm1757612","title":"GBC AutoFeed+ Large Office Shredder, 750X, Super Cross-Cut, P-4, 750 Sheets","description":"\u003cp\u003eThe AutoFeed+ 750X is the biggest machine ACCO offers in this range, and the honest way to describe it is as a 600X with more room at both ends: 750 sheets in the hopper instead of 600, a 37-gallon bin instead of 29, and a twenty-sheet manual slot instead of fifteen.\u003c\/p\u003e\n\u003cp\u003eWhat it does not give you is more time. The run time is the same four hours as the 600X, and the cabinet runs seven decibels louder at 62 dB. Choose the 750X when the constraint is how much paper you can put in and how often somebody has to empty the bin, not when it is how long the machine can run.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-sheet locking hopper\u003c\/strong\u003e, the largest in the AutoFeed+ range — a ream and a half in one load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty-sheet manual feed slot\u003c\/strong\u003e, the most generous manual capacity here, which matters more than it sounds when someone wants to feed a thick file by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e37-gallon pull-out bin\u003c\/strong\u003e, roughly 28 percent more than the 600X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-4 at 5\/32 x 1 3\/16 in\u003c\/strong\u003e (about 4 x 30 mm, roughly 120 mm²).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240-minute run time\u003c\/strong\u003e, matching the 600X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccepts staples and paper clips\u003c\/strong\u003e from the hopper; credit cards through the manual slot.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo-year onsite warranty.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21 x 23 x 42 in cabinet\u003c\/strong\u003e — the same floor area as the 600X, four inches taller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eA note on the word micro-cut.\u003c\/strong\u003e ACCO labels the whole AutoFeed+ range micro-cut while rating the X models P-4 and the M models P-5. Under DIN 66399 a particle of roughly 4 x 30 mm belongs to the cross-cut classes; micro-cut begins at P-5, where the particle must be 30 mm² or smaller. We classify by the standard rather than the marketing term, so this machine files under cross-cut and P-4. If a policy names micro-cut and means P-5, an M model is the one that satisfies it.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut (ACCO markets this head as micro-cut — see note above)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 3\/16 in (approx. 4 x 30 mm, around 120 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuto-feed capacity\u003c\/th\u003e\n\u003ctd\u003e750 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManual feed slot width\u003c\/th\u003e\n\u003ctd\u003e9.1 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e37 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRun time\u003c\/th\u003e\n\u003ctd\u003e240 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e62 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e21 in W x 23 in D x 42 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; credit cards via the manual slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years, onsite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eACCO does not publish a basis weight behind the auto-feed and manual-feed sheet ratings, nor a motor wattage or shipping weight for this model, so those rows are omitted rather than estimated. Ratings in this category are normally quoted on paper lighter than US 20 lb bond, so treat the hopper figure as a best case.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with auto-feed hopper, 37-gallon pull-out bin and power cord. ACCO's \u003cstrong\u003e1765015\u003c\/strong\u003e 30-gallon shredder bag (25 per box) names the 750X on its compatibility list — note that the bag is rated smaller than the bin, which is normal for a liner. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 750X if your problem is trips to the bin. A 37-gallon container and a 750-sheet hopper are the largest combination in this range, and in a busy department that translates directly into fewer interruptions. The twenty-sheet manual slot is a genuine convenience for anyone who prefers feeding by hand.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for a quiet room. At 62 dB it is the loudest AutoFeed+ model and noticeably louder than the 55 dB 600X, which is otherwise a very similar machine; if it has to sit near desks, the 600X is the better neighbour. Do not buy it if you need P-5 — the \u003cstrong\u003eAutoFeed+ 750M\u003c\/strong\u003e is the identical cabinet with a 2 x 15 mm head. And do not buy it expecting continuous duty: four hours is four hours, the same as on the 600X, and a machine that must run all day is a commercial cabinet such as the \u003cstrong\u003eGBC CX34-44\u003c\/strong\u003e.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40698913652800,"sku":"WSM1757612","price":2248.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/457276.jpg?v=1754950462"},{"product_id":"1758583bf","title":"GBC ShredMaster CX30-55 Cross-Cut Shredder, P-3, 30 Sheets, 1 - 5 Users","description":"\u003cp\u003eThe CX30-55 is a commercial cabinet rather than an office machine, and the specification that says so is the throat: a 16 inch feed opening on a continuous-duty motor, taking 30 sheets a pass into a 55 gallon bin.\u003c\/p\u003e\n\u003cp\u003eThat is what you are buying. A 16 inch opening is wide enough that a file box can be emptied into it in handfuls rather than sorted, and a continuous-rated motor means the machine keeps working through a records clear-out rather than stopping to cool. It is designed to be shared by a floor or to serve a central destruction point, not to stand beside a desk.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 in (40.6 cm) feed opening.\u003c\/strong\u003e Letter, legal, A4 and A3 all pass flat, and a full handful goes in without being squared up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous duty cycle.\u003c\/strong\u003e No cool-down interval built into the rating, which is what makes a box-at-a-time workload practical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-cut at 3\/16 x 1-1\/2 in (4.7 x 38 mm).\u003c\/strong\u003e That is about 179 mm² per particle, inside the DIN 66399 P-3 band of 320 mm².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds staples, paper clips, credit cards, CDs and DVDs\u003c\/strong\u003e, so incoming material does not need pre-sorting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 sheets per pass\u003c\/strong\u003e at 20 lb bond, into a 55 gallon (208 L) pull-out waste container.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder 60 dB.\u003c\/strong\u003e Quiet enough for a shared work area, which is unusual for a cabinet of this throat width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA compliant\u003c\/strong\u003e, on a wheeled cabinet weighing about 240 lb (109 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOne thing about this model needs saying openly.\u003c\/strong\u003e There are two CX30-55 specifications in circulation. ACCO's EMEA GBC datasheet describes a 4 x 40 mm cut and a 165 litre bin, which would be a P-4 machine with a 44 gallon container. The US Swingline TAA part sold here, \u003cstrong\u003e1758583B \/ 1758583BF\u003c\/strong\u003e, is not that machine: it cuts 3\/16 x 1-1\/2 in and takes a 55 gallon bin, which is what the \"-55\" in the model name refers to. 4.7 x 38 mm is roughly 179 mm², above the 160 mm² P-4 ceiling, so the correct DIN 66399 class for this SKU is \u003cstrong\u003eP-3\u003c\/strong\u003e. B\u0026amp;H, Newegg, MyBinding, DigitalBuyer, Shredder Warehouse and Whitaker Brothers all list the US part as P-3. If your policy requires P-4 or better, this is not the machine.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16 x 1-1\/2 in (4.7 x 38 mm), approx. 179 mm² per particle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e30 sheets (20 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeed opening\u003c\/th\u003e\n\u003ctd\u003e16 in (40.6 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e55 US gal (208 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise\u003c\/th\u003e\n\u003ctd\u003eunder 60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e38 x 25 x 23 in (96.5 x 63.5 x 58.4 cm), H x W x D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eapprox. 240 lb (109 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eTAA compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eFigures on this page are for the US Swingline TAA part 1758583B \/ 1758583BF. ACCO does not publish a motor wattage for the US SKU, so that row is omitted rather than carried across from the EMEA GBC datasheet, which describes a different cutting head (4 x 40 mm) and a different bin (165 L) under the same model name. Imperial values are the published ones; metric values are converted from them.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder on its wheeled cabinet with pull-out waste container, power cord and operating instructions. Shred bags are separate: ACCO's 35-60 gallon plastic shredder bag, part \u003cstrong\u003e1145482\u003c\/strong\u003e, names the TAA CX30-55 explicitly on its compatibility list. Shredder oil is part \u003cstrong\u003e1760049\u003c\/strong\u003e; oil sheets are also sold separately.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the CX30-55 if a floor, a records room or a central destruction point produces more paper than an office shredder can absorb, and the material arrives in boxes rather than folders. The 16 inch opening and the continuous-rated motor are what make that practical, and the ability to take cards and discs means one machine handles everything a department needs destroyed.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if your policy calls for P-4 or above. A 3\/16 x 1-1\/2 in cross-cut particle is a P-3 particle, and higher security in ACCO's commercial range means the \u003cstrong\u003eCM15-30\u003c\/strong\u003e at P-5 or the \u003cstrong\u003eCHS10-30\u003c\/strong\u003e at P-7, both with much narrower throats and far lower sheet counts. And if you want a wider bin rather than a wider throat, the \u003cstrong\u003eCX40-59\u003c\/strong\u003e is quoted at 40 sheets and 59 gallons.\u003c\/p\u003e","brand":"ACCO","offers":[{"title":"Default Title","offer_id":40710380355648,"sku":"1758583BF","price":4577.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/CX30-55_1328767967_cs3955-cx3055_b0e443c2-d856-4b06-937a-ae42767134e9.webp?v=1755012169"},{"product_id":"hsm-pure-320-1-4-inch-strip-cut-shredder-hsm2331","title":"HSM Pure 320 1\/4 inch Strip Cut Shredder - HSM2331","description":"\u003cp\u003eThe HSM Pure 320 in 5.8 mm strip cut is the first Pure model that stops being a desk accessory and becomes a piece of office equipment: a 556 mm floor-standing cabinet with a 360 W motor, a pull-out 25 litre bin and a 17 to 19 sheet capacity. It is also the only strip-cut machine in the compact Pure range rated for optical media, carrying an O-2 class alongside its \u003cstrong\u003eP-2\u003c\/strong\u003e paper rating.\u003c\/p\u003e\n\u003cp\u003eThe strip is 5.8 mm - just under a quarter of an inch. That is a bulk-destruction cut, not a confidential one, and the O-2 rating is what most buyers are actually here for: a single machine that clears paper fast and destroys the occasional CD or DVD without needing a second device. If security rather than speed is the requirement, the cross-cut Pure 320 exists and is dealt with below.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17 to 19 sheets a pass.\u003c\/strong\u003e Nearly half a ream in ten passes, which is a different class of work from the Pure 220's 12 to 14.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for CDs and DVDs (O-2).\u003c\/strong\u003e The cross-cut Pure 320 is not - it carries no optical class at all. If disc destruction matters, this is the Pure 320 to buy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 W motor.\u003c\/strong\u003e More than double the Pure 220's, and the reason the sheet capacity jumps rather than creeps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230 mm throat.\u003c\/strong\u003e Letter and legal feed unfolded; A4 has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull-out 25 litre container.\u003c\/strong\u003e No lifting a housing off - the bin slides out of the cabinet, which is the right design once you are emptying it regularly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop with stand-by.\u003c\/strong\u003e Feed-activated running, low idle draw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety element and overload-protected feed.\u003c\/strong\u003e Immediate stop on contact; the feed backs off rather than stalling on an over-thick handful.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet at approximately 55 dB(A) idle.\u003c\/strong\u003e Slightly quieter than the smaller Pure models despite the larger motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (full rating E-2 | O-2 | P-2 | T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5.8 mm (0.228\", just under 1\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e17 - 19 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e230 mm (9.1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e25 L (6.6 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e165 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e360 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e365 x 255 x 556 mm (14.4\" x 10.0\" x 21.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.9 kg (21.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe Pure 320 with its 25 litre pull-out container and HSM's operating instructions. Shredder bags are not included. Because the bin is a drawer rather than a tipping tub, many sites do choose to line it - ask us for the correct 25 litre HSM liner rather than guessing at a generic size.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThis is a good fit for a small office of two to five people whose shredding is mostly non-sensitive but voluminous - a retail back office, a workshop, a studio, a school department - and who occasionally need to destroy a disc. It is also a sensible bulk machine to sit next to a high-security shredder so the expensive one is not used on catalogues.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for confidential records. A 5.8 mm strip is a wide strip: whole sentences survive. If the paper carries names, account numbers or medical detail, buy the \u003cstrong\u003eHSM Pure 320 cross-cut\u003c\/strong\u003e instead - the same cabinet and the same bin, cutting a 3.9 x 30 mm P-4 particle - accepting that capacity drops to 8 to 9 sheets and that it loses the optical-media rating. If you want both P-4 and disc destruction in one machine, step up to the \u003cstrong\u003eHSM Pure 420 cross-cut\u003c\/strong\u003e, which carries O-3 as well as P-4. And if tabloid or A3 sheets are part of the workload, only the Pure 530 has a throat wide enough at 300 mm.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751934603328,"sku":"2331123","price":445.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2331121_HSM_Pure_320_feature_image_1_JPG_RGB_1280x1280_6d999e62-2f2f-4e88-bc73-d59ea0bbd039.jpg?v=1759514118"},{"product_id":"hsm-pure-320-1-8-x-1-1-8-cross-cut-shredder-hsm2333","title":"HSM Pure 320 1\/8 x 1 1\/8 Cross Cut Shredder - HSM2333","description":"\u003cp\u003eThe cross-cut HSM Pure 320 puts DIN 66399 \u003cstrong\u003eP-4\u003c\/strong\u003e security into a floor-standing cabinet with a 360 W motor and a pull-out bin. It cuts 3.9 x 30 mm particles - 117 mm², inside the 160 mm² ceiling DIN sets for P-4 - and takes 8 to 9 sheets a pass. Against the desktop Pure 220 cross-cut, that is roughly a third more paper per pass and, more usefully, a bin that holds around 350 shredded sheets instead of 230.\u003c\/p\u003e\n\u003cp\u003eOne thing to check before you order: unlike its strip-cut stablemate, this model carries \u003cem\u003eno\u003c\/em\u003e optical-media class. The Pure 320 strip cut is rated O-2 for CDs; the cross-cut is rated E-3, F-1, P-4 and T-4 only. Paper, film, cards yes; discs no. If you need P-4 paper security and disc destruction from one machine, the Pure 420 cross-cut is the smallest model that does both.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.9 x 30 mm particle cut at P-4.\u003c\/strong\u003e A 117 mm² particle - meaningfully below the DIN limit rather than scraping it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350-sheet bin capacity.\u003c\/strong\u003e Particle cut packs tightly, so the same 25 litre container that holds 165 strip-cut sheets holds more than twice as many here.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 W motor with overload-protected feed.\u003c\/strong\u003e The feed backs off before it stalls, which is what keeps a P-4 machine usable when someone pushes a slightly-too-thick stack in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePull-out container.\u003c\/strong\u003e Slides out of the cabinet on its own rather than requiring the housing to be lifted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230 mm throat.\u003c\/strong\u003e Letter and legal feed flat and unfolded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed-activated start, automatic stop, stand-by.\u003c\/strong\u003e Nothing to switch on, nothing left running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety element at the intake.\u003c\/strong\u003e Contact stops the paper feed immediately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximately 55 dB(A) at idle.\u003c\/strong\u003e One of the quieter machines in its size class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty on the steel cutting rollers,\u003c\/strong\u003e which handle staples and paper clips without pre-sorting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (full rating E-3 | F-1 | P-4 | T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut (HSM: particle cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.9 x 30 mm (approx. 5\/32\" x 1 3\/16\") - 117 mm² particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e8 - 9 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e230 mm (9.1\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e25 L (6.6 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e350 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e360 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e365 x 255 x 556 mm (14.4\" x 10.0\" x 21.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e11.1 kg (24.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit and magnetic cards (no optical media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder, 25 litre pull-out container, operating instructions. Bags, oil and accessories are separate. Particle-cut cutting heads do benefit from periodic lubrication with proper shredder oil - if you are going to run this machine hard, buy a bottle at the same time and check the interval in the manual.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy it when a small office needs real confidentiality without a departmental machine's footprint or price: a two-to-five person professional practice, a school office handling pupil records, a clinic's front desk, a finance team in a small business. Eight to nine sheets a pass is honest office capacity, and the 350-sheet bin means emptying is a weekly rather than daily chore for most users.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if discs are part of the destruction list - it has no optical rating, and the \u003cstrong\u003eHSM Pure 420 cross-cut\u003c\/strong\u003e (P-4 with an O-3 class) is the smallest Pure that covers both. Do not buy it if you need speed above security: the \u003cstrong\u003eHSM Pure 320 strip-cut\u003c\/strong\u003e does 17 to 19 sheets in the identical cabinet, at P-2. And if your policy calls for P-5 or higher, no Pure 320 variant reaches it; the Pure 420 and 530 offer a 1.9 x 15 mm P-5 head in Europe and the HSM SECURIO range covers high-security work properly. Tabloid and A3 do not fit a 230 mm throat - that needs the Pure 530.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751934636096,"sku":"2333123","price":539.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2331121_HSM_Pure_320_feature_image_1_JPG_RGB_1280x1280_47da819b-195d-4ec9-87c4-44c48c1850a0.jpg?v=1759514129"},{"product_id":"hsm-pure-220-5-32-x-1-cross-cut-document-shredder-hsm2323","title":"HSM Pure 220 5\/32 x 1 Cross Cut Document Shredder - HSM2323","description":"\u003cp\u003eThe HSM Pure 220 in 4 x 25 mm particle cut is the Pure 120 cross-cut with a bigger appetite and a bigger bin: 6 to 7 sheets a pass instead of 5 to 6, and 25 litres of container instead of 20. Same DIN 66399 \u003cstrong\u003eP-4\u003c\/strong\u003e security, same 225 mm throat, same footprint on the desk - it is simply 51 mm taller to accommodate the larger container.\u003c\/p\u003e\n\u003cp\u003eThat is a small difference on paper and a real one in use. The 120's bin holds about 184 shredded sheets; the 220 holds around 230, and the extra sheet per pass compounds across a working week. If you already know that a personal P-4 shredder is what you need, the question is only whether you want to walk to the recycling bin four times a month or five.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 at 6 to 7 sheets.\u003c\/strong\u003e Particles of 4 x 25 mm - 100 mm² against the 160 mm² DIN limit for P-4 - so the rating has margin rather than sitting on the boundary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 litre container.\u003c\/strong\u003e Roughly 230 shredded sheets before it needs emptying, a quarter more than the Pure 120.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarts and stops with the paper.\u003c\/strong\u003e No switch, no forgotten machine running under a desk overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-by mode when idle.\u003c\/strong\u003e Keeps standing power draw down between uses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety element at the feed slot.\u003c\/strong\u003e Light pressure stops the rollers immediately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel cutting rollers, lifetime warranty.\u003c\/strong\u003e HSM specifies them to handle staples, paper clips, magnetic cards and credit cards. The lifetime roller cover applies to P-2 through P-5 machines, which includes this one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable housing top for emptying.\u003c\/strong\u003e Lift the upper section, carry the container out, tip and replace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (full rating E-3 | F-1 | P-4 | T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut (HSM: particle cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e4 x 25 mm (approx. 5\/32\" x 1\") - 100 mm² particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e6 - 7 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e225 mm (8.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e25 L (6.6 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e230 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e160 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-130 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 - 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e366 x 258 x 466 mm (14.4\" x 10.2\" x 18.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.5 kg (9.9 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit and magnetic cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 25 litre container fitted and HSM operating instructions. Bags are not included; the container is rigid and designed to be tipped directly into recycling. If you prefer to line it, ask us for a bag sized to 25 litres rather than assuming a generic office bag will sit correctly under the cutting head.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe Pure 220 cross-cut suits a single professional who handles confidential paper regularly rather than occasionally - a bookkeeper, a small medical or dental practice, an HR consultant, a solicitor working from home. It is the machine to buy when you have concluded that the Pure 120 will be emptied too often but a floor-standing office shredder is more machine than one desk needs.\u003c\/p\u003e\n\u003cp\u003eDo not buy it expecting office throughput. Six or seven sheets a pass is a personal-machine number and HSM publishes no duty-cycle rating for the Pure 220, so it is not built to run back-to-back for an hour. A department of five will outgrow it in a month; the \u003cstrong\u003eHSM Pure 420 cross-cut\u003c\/strong\u003e at 13-15 sheets with a 35 litre bin is the honest answer there, and the \u003cstrong\u003ePure 530 cross-cut\u003c\/strong\u003e beyond that. If you need higher security than P-4, nothing in the Pure 220 line will provide it - the Pure 420 and Pure 530 offer a 1.9 x 15 mm P-5 head, and true high-security work belongs in the HSM SECURIO range. This machine also has no optical-media rating, so CDs are out.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935946816,"sku":"2323113","price":312.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2323111_HSM_Pure_220_feature_image_1_JPG_RGB_1280x1280_a0dde4ac-bbc5-440f-9a63-02d6c11066b2.jpg?v=1759514525"},{"product_id":"hsm-pure-220-strip-cut-shredder-for-general-shredding","title":"HSM Pure 220 Strip Cut Shredder for General Shredding","description":"\u003cp\u003eTwelve to fourteen sheets a pass into a 25 litre bin, at DIN 66399 \u003cstrong\u003eP-2\u003c\/strong\u003e: the HSM Pure 220 strip-cut is the highest-throughput machine in the compact half of the Pure range, and the one to choose when the job is getting rid of paper rather than protecting what is printed on it.\u003c\/p\u003e\n\u003cp\u003eIt is worth correcting a number that has circulated on this product for years. The sheet capacity is 12 to 14, not 14 or higher, and it is quoted by HSM at 80 g\/m². The strip width is 3.9 mm - about 5\/32 inch, not the 1\/8 inch often quoted. Both figures come from HSM's datasheet for article 2320111, the European sibling of this US model, and both are what you should plan against.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighest sheet capacity in the Pure 120\/220 group.\u003c\/strong\u003e 12 to 14 sheets, against 10 to 12 for the Pure 120 strip cut and 6 to 7 for the 220 cross cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 litre container holding around 225 shredded sheets.\u003c\/strong\u003e Emptying is a lift-the-lid-and-tip job; no bag needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start and stop on paper detection.\u003c\/strong\u003e Nothing to switch, nothing left running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-by energy saving.\u003c\/strong\u003e Idle consumption drops when the machine is not in use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntake safety element.\u003c\/strong\u003e Slight pressure stops the paper feed at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel rollers with lifetime warranty.\u003c\/strong\u003e Staples, paper clips, magnetic cards and credit cards are all within HSM's specification for this cutting head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload-protected feed.\u003c\/strong\u003e Reduces jams when a slightly-too-thick handful goes in, which on a fourteen-sheet machine happens weekly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (full rating E-2 | P-2 | T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.9 mm (approx. 5\/32\", 0.154\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e12 - 14 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e225 mm (8.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e25 L (6.6 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e225 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e160 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-130 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 - 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e366 x 258 x 466 mm (14.4\" x 10.2\" x 18.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.0 kg (8.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit and magnetic cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder, its 25 litre container and the HSM operating instructions. Bags are not supplied and are not required - the container is rigid and tips. Strip-cut heads do not need routine oiling, so there is no consumable to budget for.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy it for a reception, a stockroom, a home office or a small practice that produces a genuine volume of non-confidential paper: mailers, packing slips, superseded price lists, meeting handouts, envelopes. Fourteen sheets at a time is enough to clear a day's tray in a couple of minutes, and P-2 is a perfectly reasonable level for material nobody would care to read.\u003c\/p\u003e\n\u003cp\u003eDo not use it for personal data. Whole lines of text survive a 3.9 mm strip, and if your organisation has a written destruction policy it almost certainly specifies P-4 or higher for anything identifiable. The \u003cstrong\u003eHSM Pure 220 cross-cut\u003c\/strong\u003e is the same machine in 4 x 25 mm P-4 at 6-7 sheets; the \u003cstrong\u003eHSM Pure 320 strip-cut\u003c\/strong\u003e is the next step up in raw throughput at 17-19 sheets if speed rather than security is what you are buying. Do not expect it to shred CDs - there is no O class here - and do not treat it as a departmental machine; HSM publishes no duty cycle for it and it is specified as a personal shredder.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935979584,"sku":"2320113","price":296.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2320111_HSM_Pure_220_feature_image_1_JPG_RGB_1280x1280_72f84df4-eea3-4efa-a507-6728d3982862.jpg?v=1759514543"},{"product_id":"hsm-pure-120-5-32-x-1-cross-cut-document-shredder-hsm2313","title":"HSM Pure 120 5\/32 x 1 Cross Cut Document Shredder - HSM2313","description":"\u003cp\u003eThe HSM Pure 120 in 4 x 25 mm particle cut is the smallest genuinely confidential shredder HSM builds. It is a one-person, desk-side machine rated DIN 66399 \u003cstrong\u003eP-4\u003c\/strong\u003e - the level at which reconstruction stops being a rainy-afternoon exercise - and the trade for that security is throughput: five to six sheets a pass, into a 20 litre bin.\u003c\/p\u003e\n\u003cp\u003eThe distinction that matters within the Pure 120 pair is the cutting head. The strip-cut Pure 120 takes 10 to 12 sheets and is rated P-2, which is a tidiness level rather than a security one. This machine cuts each sheet into particles of 4 x 25 mm - 100 mm², comfortably inside the 160 mm² ceiling DIN sets for P-4 - which is the level normally specified for personal data under GDPR-style handling rules and the level most US organisations settle on for HR files, payroll and customer records.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 particle cut in a 4 kg machine.\u003c\/strong\u003e Most shredders this small stop at strip cut. This one puts a genuinely confidential cut on a desk without a floor-standing cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start and stop.\u003c\/strong\u003e Feed paper and it runs; stop feeding and it stops. There is no switch to remember, which is the single biggest reason small shredders get left running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-by mode.\u003c\/strong\u003e The machine drops to a low-draw state when idle, which matters on a device that spends most of its day doing nothing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety element at the intake.\u003c\/strong\u003e Light pressure on it halts the paper feed immediately - the guard that makes a small machine acceptable in an office where people lean over it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel cutting rollers with a lifetime warranty.\u003c\/strong\u003e Staples and paper clips go through without sorting, and HSM's lifetime roller cover applies across P-2 to P-5, which includes this machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift-off housing for emptying.\u003c\/strong\u003e The top section comes away and a recessed grip makes the 20 litre bin easy to carry to the recycling bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverload-protected paper feed.\u003c\/strong\u003e The feed backs off rather than stalling when you over-fill it, which on a five-sheet machine is a protection you will use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (full rating E-3 | F-1 | P-4 | T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut (HSM: particle cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e4 x 25 mm (approx. 5\/32\" x 1\") - 100 mm² particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e5 - 6 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e225 mm (8.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e20 L (5.3 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e184 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e145 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-130 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 - 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e366 x 258 x 415 mm (14.4\" x 10.2\" x 16.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.5 kg (9.9 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit and magnetic cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder with its 20 litre waste container fitted, and HSM's operating instructions. Shredder bags, shredder oil and any accessory are ordered separately - the bin is a rigid container designed to be tipped, so a liner is optional rather than required.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the Pure 120 cross-cut if one person needs to destroy confidential paper at their own desk: a home-based accountant, a practice manager, a clinician's office, a small legal practice, a consultant handling client records. Five to six sheets a pass is enough when the material is a few documents a day and the alternative is a walk to a shared machine or a collection bin.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if paper arrives in stacks. It has a 20 litre bin holding roughly 184 shredded sheets, which is well under half a ream, and no published duty-cycle rating - it is an intermittent-use personal machine and it will frustrate anyone feeding it continuously. If you want P-4 at office pace, the \u003cstrong\u003eHSM Pure 320 cross-cut\u003c\/strong\u003e doubles the capacity to 8-9 sheets and the \u003cstrong\u003eHSM Pure 420 cross-cut\u003c\/strong\u003e takes 13-15 into a 35 litre bin. If you only need to make paper unreadable and volume is what you are short of, the \u003cstrong\u003estrip-cut Pure 120\u003c\/strong\u003e is the same machine at 10-12 sheets. And it does not shred optical media - there is no O class in its DIN rating.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751936012352,"sku":"2313113","price":295.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2313111_HSM_Pure_120_feature_image_1_JPG_RGB_1280x1280_66cd571b-a844-43fd-a233-622fb6659d4a.jpg?v=1759514564"},{"product_id":"hsm-pure-120-strip-cut-shredder-for-general-shredding","title":"HSM Pure 120 Strip Cut Shredder for General Shredding","description":"\u003cp\u003eThis is the volume half of the HSM Pure 120 pair: a 3.9 mm strip cut that swallows 10 to 12 sheets at a time, rated DIN 66399 \u003cstrong\u003eP-2\u003c\/strong\u003e. It exists for the paper that has to disappear but was never confidential - and it is roughly twice as fast at that job as its cross-cut twin.\u003c\/p\u003e\n\u003cp\u003eBe clear about what P-2 means before you buy. A 3.9 mm strip leaves whole lines of text readable down the length of each strip. It defeats a casual glance and a bin-raider with no patience; it does not defeat anyone with a table and an hour. Note also that the strip width really is 3.9 mm, which is closer to 5\/32 inch than to the 1\/8 inch some listings round it to - including, historically, ours. That is the manufacturer's figure from HSM's own datasheet for article 2310111, the European twin of this US model.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 to 12 sheets a pass.\u003c\/strong\u003e Double the cross-cut version's throughput, which is what you want when the task is clearing a tray rather than protecting a record.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeed-activated operation.\u003c\/strong\u003e The rollers start when paper enters and stop when it clears, so the machine never sits running.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStand-by power saving.\u003c\/strong\u003e Idle draw drops automatically - relevant for a machine that lives under a desk and is used in short bursts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety element on the intake.\u003c\/strong\u003e Slight pressure stops the feed instantly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened steel rollers, lifetime warranty.\u003c\/strong\u003e Staples and paper clips are handled without sorting. HSM's lifetime cutting-roller cover runs from P-2 to P-5, so this machine sits inside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable housing top.\u003c\/strong\u003e The upper section lifts off to empty the 20 litre container; a recessed grip makes carrying it manageable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet for its class.\u003c\/strong\u003e Approximately 55 to 60 dB(A) at idle, which is conversation level rather than machine-room level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (full rating E-2 | P-2 | T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.9 mm (approx. 5\/32\", 0.154\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e10 - 12 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e225 mm (8.9\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e20 L (5.3 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin holds approx.\u003c\/th\u003e\n\u003ctd\u003e180 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e145 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-130 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 55 - 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e366 x 258 x 415 mm (14.4\" x 10.2\" x 16.3\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e4.0 kg (8.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit and magnetic cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSheet capacity is HSM's own figure at 80 g\/m². Standard US 20 lb copier paper is about 75 g\/m², slightly lighter, so the published figure is a conservative one for a typical American office. Any shredder quoted against lighter paper will look better on paper than it performs.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder, 20 litre waste container and operating instructions. No bags are supplied. Strip-cut cutting heads do not require oiling in the way particle-cut heads benefit from, so there is no consumable to buy on day one.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThis is the right machine for a home office or a reception desk that generates a steady trickle of junk mail, envelopes, delivery notes, drafts and expired printouts. Ten to twelve sheets a pass means a day's accumulated paper goes through in a few handfuls rather than twenty. At this price it is also a sensible second machine to sit alongside a secure shredder, so the P-4 unit is not worn out on catalogues.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for anything carrying a name and an account number. For that you want the \u003cstrong\u003eHSM Pure 120 cross-cut\u003c\/strong\u003e, the same machine in 4 x 25 mm P-4 at 5-6 sheets a pass, or - if you want P-4 without giving up speed - the \u003cstrong\u003eHSM Pure 320 cross-cut\u003c\/strong\u003e. Do not buy it as a shared office machine either: HSM publishes no duty cycle for the Pure 120 and the 20 litre bin holds around 180 shredded sheets, so a busy department will be emptying it constantly. And it will not take CDs; there is no optical-media class in its rating.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751936045120,"sku":"2310113","price":258.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2310111_HSM_Pure_120_feature_image_1_JPG_RGB_1280x1280_780390c7-302c-4f3b-adad-a6c7c885785d.jpg?v=1759514583"},{"product_id":"hsm-shredstar-x5-3-16-x-1-1-8-plus-separate-cd-cutting-unit-hsm1043w","title":"HSM shredstar X5 3\/16 x 1 1\/8 plus separate CD cutting unit - HSM1043w","description":"\u003cp\u003eThe HSM shredstar X5 is the entry point to P-4 security in HSM's range: 3\/16 x 1 1\/8 inch particles, five sheets a pass, 9.26 lb, and a 125 W motor. It is deliberately small. Where the S10 alongside it trades security for speed, the X5 does the opposite — it gives up half the sheet capacity of the strip-cut model in the same chassis in exchange for a cut size of 135 square millimetres that satisfies most written shredding policies. Five sheets is a real limit and worth taking seriously before you buy.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 particle cut at 4.5 x 30 mm.\u003c\/strong\u003e 135 square millimetres per particle, comfortably inside the DIN 66399 P-4 ceiling of 160. This is the security class most organisations specify as their minimum for documents containing personal data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate CD cutting unit.\u003c\/strong\u003e A second slot with its own cutter and its own collection tray handles CDs, DVDs and plastic cards. Disc fragments stay out of the paper bin, and the paper cutting head never sees polycarbonate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles staples and paper clips.\u003c\/strong\u003e HSM lists both among the shreddable materials, so you do not need to de-staple routine paperwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-barrier automatic operation.\u003c\/strong\u003e The motor starts as paper enters and stops shortly after the throat clears; there is no switch to hold down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reverse.\u003c\/strong\u003e Overfeed the throat and the head reverses the stack out rather than stalling with paper trapped in the blades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.8 gallon bin, approximately 225 sheets.\u003c\/strong\u003e Particle waste compacts better than strip waste, so despite the small bin the X5 holds nearly twice as many sheets as the strip-cut S10 in the same 4.8 gallon container.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-1 \/ T-2 \/ E-2 \/ F-1 (DIN 66399 \/ ISO\/IEC 21964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eParticle cut (cross-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 1 1\/8\" (4.5 x 30 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e5 sheets (80 g\/m2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.66\" (220 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e4.8 US gal (18 L), approx. 225 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e125 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage \/ frequency\u003c\/th\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 58 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e13.58\" x 9.65\" x 15.16\" (345 x 245 x 385 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e9.26 lb (4.2 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from HSM's published technical data for article number 1043123. HSM does not publish warranty terms on the datasheet for this article, so no warranty figure is stated here.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eHSM publishes no itemised packing list for the X5. The datasheet confirms the shredder head with integrated separate CD cutting unit, the 4.8 gallon waste container and the inspection window in the housing. Bags and lubricant are not part of the stated scope of delivery.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the X5 if you are one person, you shred a handful of pages at a time, and P-4 is a requirement rather than a preference. It is the lightest and least expensive way to get a compliant cut size with a separate disc cutter, and the 225-sheet bin means it is not constantly asking to be emptied.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you routinely shred more than a few pages in one go. Five sheets is genuinely five sheets, and a stapled four-page report with a cover sheet is already at the limit. If your batches are bigger, the shredstar X8 is the same chassis, same bin, same throat width and same P-4 cut at 8 sheets with a 250 W motor, and the shredstar X10 raises that to 10 sheets with a taller 5.3 gallon bin.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if your policy specifies P-5. The X5 is P-4 and no amount of slow feeding changes the particle size. The shredstar X6pro is the closest sibling that clears P-5, cutting 1\/16 x 5\/8 inch at six sheets on the same 8.66 inch throat.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751936208960,"sku":"1043123","price":99.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/1043123_HSM_shredstar_X5_feature_image_1_JPG_RGB_neutral_1280x1280_bd2da8c3-f8ec-4405-8cc2-41e96361fd4f.jpg?v=1759514606"},{"product_id":"hsm-shredstar-x6pro-1-16-x-5-8-sep-cd-cutting-unit-hsm1046","title":"HSM shredstar X6pro 1\/16 x 5\/8 + sep. CD cutting unit - HSM1046","description":"\u003cp\u003eThe HSM shredstar X6pro is the highest security level HSM offers in its shredstar line: DIN 66399 P-5, cutting 1\/16 x 5\/8 inch particles that measure 30 square millimetres — exactly at the P-5 ceiling and roughly a quarter the area of the P-4 cut used by the rest of the small-chassis range. It pays for that with capacity. Six sheets a pass is the trade, in a body identical to the 10-sheet X10 right down to the 160 W motor and the 5.3 gallon bin.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 particle cut at 2 x 15 mm.\u003c\/strong\u003e Thirty square millimetres per particle, meeting the DIN 66399 P-5 limit. US retailers commonly market this cut as micro-cut; HSM's own datasheet calls it particle cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate CD cutting unit.\u003c\/strong\u003e A dedicated slot, cutter and collection container for CDs, DVDs and plastic cards, so optical waste stays sorted and the paper head stays clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.3 gallon bin, approximately 255 sheets.\u003c\/strong\u003e P-5 particles are small and pack tightly, which is why a 5.3 gallon container still holds more sheets here than the same volume does on a strip-cut machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reverse.\u003c\/strong\u003e Six sheets is a firm limit and an overfeed is easy to do by accident; the reverse function backs the stack out rather than trapping it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-barrier operation with LED status.\u003c\/strong\u003e Automatic start and stop, plus indicators for power, overload, overheat and bin full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStaples and paper clips accepted.\u003c\/strong\u003e Listed as shreddable by HSM, so documents do not need to be prepared before feeding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5 \/ O-1 \/ T-2 \/ E-2 \/ F-2 (DIN 66399 \/ ISO\/IEC 21964)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eParticle cut (marketed in the US as micro-cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/16\" x 5\/8\" (2 x 15 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e6 sheets (80 g\/m2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e8.66\" (220 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e5.3 US gal (20 L), approx. 255 sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e160 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage \/ frequency\u003c\/th\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 58 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e13.58\" x 9.65\" x 17.52\" (345 x 245 x 445 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e13.89 lb (6.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSpecifications taken from HSM's published technical data for article number 1046113. HSM does not publish warranty terms on the datasheet for this article, so no warranty figure is stated here.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eHSM publishes no itemised packing list for the X6pro. Confirmed from the datasheet: the cutting head with integrated separate CD cutting unit, and the 5.3 gallon waste container with inspection window. Bags and oil are not in the stated scope of delivery.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the X6pro if a written policy specifies P-5 and you are equipping one desk. For HR files, payroll, medical notes, legal correspondence or anything with account numbers attached to names, P-5 is the class most auditors expect to see and this is the least expensive HSM machine that reaches it.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you shred in volume. Six sheets a pass is slow work over a stack, and the practical difference against the 10-sheet X10 in the same body is noticeable within minutes. If P-4 satisfies your policy, the X10 is the same machine with more throughput and a larger sheet rating.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if several people need P-5. The shredstar X12pro is the office-chassis equivalent: same 2 x 15 mm P-5 cut, but 12 sheets a pass, a 550 W motor, a 6.9 gallon bin rated at around 330 sheets, and castors. And if you are shredding classified material, note that P-5 is not NSA 02-01 — that specification requires 1 x 5 mm particles and a listing on the NSA Evaluated Products List, which no shredstar model holds.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751936241728,"sku":"1046113","price":134.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/1046113_HSM_shredstar_X6pro_feature_image_1_JPG_RGB_neutral_1280x1280_98d454f1-cf28-493d-8db4-ec7e432a9d3d.jpg?v=1759514632"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/collections\/Screenshot_2026-05-06_at_7.43.05_PM.png?v=1778092255","url":"https:\/\/shreddermaster.com\/collections\/personal-small-office-shredders.oembed?page=4","provider":"Shredder Master","version":"1.0","type":"link"}