{"title":"Commercial \u0026 Large Office Paper Shredders","description":"\u003cp\u003eThese are the \u003cstrong\u003ecommercial office shredders\u003c\/strong\u003e most buyers mean when they ask for a \u003cstrong\u003elarge office shredder\u003c\/strong\u003e — a shared machine that sits in a copy room, a mail room or an occupied department and serves a team of roughly \u003cstrong\u003eten to thirty people\u003c\/strong\u003e, or a whole floor. In the trade the smaller end of this range is called a \u003cstrong\u003edepartmental shredder\u003c\/strong\u003e. What they have in common is that nobody owns them, so they have to run without anyone thinking about them.\u003c\/p\u003e\n\u003cp\u003eThat drives the specification: a wide throat so nobody has to fold anything, a bin large enough that emptying is a weekly job rather than a daily one, and a duty cycle that survives someone arriving with a full trolley. Many machines at this level carry an \u003cstrong\u003eautomatic oiler\u003c\/strong\u003e, which removes the maintenance step most offices forget, and several carry a \u003cstrong\u003efine dust filter\u003c\/strong\u003e — Dahle's CleanTEC line is built around one, rated to trap up to 98% of fine dust particles. If the shredder lives among desks rather than in a copy room, that matters more than most buyers expect.\u003c\/p\u003e\n\u003cp\u003eTypical figures here: \u003cstrong\u003e12 to 16 inch throats\u003c\/strong\u003e and \u003cstrong\u003e38 to 45 gallon bins\u003c\/strong\u003e. A large part of the range is the MBM Destroyit 4000 series — the 4001, 4003 and 4005 — with 16 inch throats and 44 gallon bins across the line. The same chassis is offered at several cut sizes, so you choose the security level without changing the machine: 6 mm strip at P-2, 4 x 40 mm cross-cut at P-4 and 2 x 15 mm at P-5, with sheet capacity falling from roughly 52 sheets at P-2 to 16 at P-5. The HSM SECURIO and Pure lines, the Dahle CleanTEC machines and the Kobra 270 TS cover P-4 for general office paperwork, P-5 where records are regulated, and P-6 micro-cut for genuinely sensitive material — again with capacity falling as the particle gets finer.\u003c\/p\u003e\n\u003cp\u003eSize the machine on sustained use rather than peak, and allow about 70% of the published sheet figure for real paper. Also worth checking: noise, since these machines run in occupied space, and duty cycle, since a shared machine sees long sessions rather than a page at a time. Both are explained on the \u003ca href=\"\/pages\/specifications\"\u003especifications reference\u003c\/a\u003e. Compare models on the \u003ca href=\"\/pages\/compare\"\u003ecomparison page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eIs this the right size for you?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1–4 people, deskside\u003c\/strong\u003e — see \u003ca href=\"\/collections\/personal-small-office-shredders\"\u003epersonal and small office shredders\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5–15 people\u003c\/strong\u003e — see \u003ca href=\"\/collections\/medium-office-shredders\"\u003emedium office shredders\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10–30 people, a department or a shared floor\u003c\/strong\u003e — this page.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous duty, high volume or bulk destruction\u003c\/strong\u003e — see \u003ca href=\"\/collections\/heavy-duty-industrial-shredders\"\u003ehigh capacity and industrial shredders\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"270-ts-c4-auto-oiler","title":"KOBRA 270 TS C4 AO","description":"\u003cp\u003eThe KOBRA 270 TS C4 AO is the cross-cut member of the 270 TS touch-screen family, and the one to pick when the paperwork leaving your office contains personal data rather than routine correspondence. It cuts at 3.9 x 40 mm, which is 156 mm² per particle and therefore DIN 66399 \/ ISO 21964 level P-4. What separates it from the S4 and S5 strip-cut siblings on the same chassis is not just the security level: this build adds an integrated automatic oiling system, so the cutting head is lubricated without anyone remembering to do it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 cross cut at 3.9 x 40 mm.\u003c\/strong\u003e Roughly 2,000 particles from a single A4 sheet, which is the level most US privacy and HR retention policies point to for personal data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated automatic oiler.\u003c\/strong\u003e The cutting head is oiled from an on-board reservoir. Dry cross-cut knives are the most common cause of falling sheet capacity, and this removes the human step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate CD\/DVD cutting unit.\u003c\/strong\u003e Optical media go through a dedicated second cutting head instead of the paper knives, so discs do not blunt the P-4 head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch panel control.\u003c\/strong\u003e Forward, reverse and stop are capacitive pads rather than mechanical switches, and holding Forward for five seconds runs the machine continuously for 30 seconds for transparent film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty motor.\u003c\/strong\u003e There is no timed cool-down period; the 500 W motor is rated for continuous running rather than a duty cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-hardened steel knives on a chain drive.\u003c\/strong\u003e Kobra rates the knives as unaffected by staples and paper clips, and the drive uses steel gears rather than a belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby.\u003c\/strong\u003e The machine drops into standby after eight seconds of inactivity and disconnects itself from the mains after four hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPC load display, auto start\/stop, auto reverse and safety stop\u003c\/strong\u003e on door opening or a full bin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (ISO\/IEC 21964 \/ DIN 66399: P-4 O-3 T-4 E-3 F-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.9 x 40 mm (156 mm² per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e24–26 sheets at 70 g\/m²; 19–21 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12.2 in (310 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 gallons (110 litres)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e500 W (rated 3\/4 HP on Kobra's US datasheet), 24-hour continuous duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54–55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.2 x 17.2 x 35.2 in (53 x 43 x 88 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e101 lb (46 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, films, credit cards, chip cards, CDs\/DVDs\/Blu-ray (via the separate media unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder head and its 29-gallon caster-mounted cabinet ship as one assembled unit, together with the power cord and the operating manual. \u003cstrong\u003eWaste bags are not included\u003c\/strong\u003e and neither is a spare bottle of Kobra cutting-head oil; both are ordinary consumables and are worth adding to the first order so the machine is usable on day one.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it if a department of roughly ten to twenty people needs P-4 destruction of records containing names, account numbers or health information, and if nobody in that department is going to reliably oil a shredder. The automatic oiler is the reason this model exists alongside the plain 270 TS C4, and it pays for itself the first time a neglected head would otherwise have jammed.\u003c\/p\u003e\u003cp\u003eDo not buy it for volume. At 24–26 sheets a pass on 70 g\/m² paper it is slower than the strip-cut \u003cstrong\u003eKOBRA 270 TS S5\u003c\/strong\u003e on the identical chassis, which takes 30–32 sheets but only reaches P-2. If your retention policy tolerates strip cut, the S5 clears a purge box far faster and costs less. If you are destroying classified or Top Secret material, none of these will do — you need the \u003cstrong\u003eKOBRA 270 TS HS-6 AO\u003c\/strong\u003e at 0.8 x 5 mm, which is on the NSA Evaluated Products List but drops to four or five sheets a pass. And if the 29-gallon bin is the constraint rather than the cut, the \u003cstrong\u003eKOBRA 300.2 C4\u003c\/strong\u003e gives you the same P-4 cut into a 40-gallon cabinet with a 900 W motor.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690371854400,"sku":"270 TS C4 AUTO OILER","price":1826.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/4f99bffb-b763-40e1-ac1e-209c0500dff1_c4ce3d51-ddf7-460d-86e3-491758281347.jpg?v=1754951641"},{"product_id":"270-ts-hs6-auto-oiler","title":"KOBRA 270 TS HS-6 AO","description":"\u003cp\u003eThe KOBRA 270 TS HS-6 AO destroys a sheet of paper into roughly 20,000 particles measuring 0.8 x 5 mm. That is 4 mm² each, comfortably inside the DIN 66399 \/ ISO 21964 P-7 limit of 5 mm², and it is the particle size the NSA\/CSS 02-01 specification is written around. It is the high-security member of the 270 TS touch-screen family: same cabinet, same touch panel, same continuous-duty motor as the S4, S5 and C4 AO, but a completely different cutting head and a completely different job.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8 x 5 mm particle cut, rated P-7 F-3.\u003c\/strong\u003e At 4 mm² the output is below the P-7 ceiling of 5 mm², and the fragment size satisfies the dimensional requirement of NSA\/CSS Specification 02-01.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKobra 270 TS HS-6 appears on the NSA Evaluated Products List for Paper Shredders.\u003c\/strong\u003e The EPL revision current at the time of writing (April 2026) lists the model under Marquis Business Systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated automatic oiling system.\u003c\/strong\u003e A P-7 head has far more cutting edges in contact with paper than a cross-cut head; keeping it lubricated is not optional, and the AO build takes the decision away from the operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch panel with EPC load indication.\u003c\/strong\u003e The Electronic Power Control readout matters more here than on any other machine in the range, because the safe sheet count is small and the penalty for guessing is a jam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty 500 W motor\u003c\/strong\u003e with thermal protection and no timed cool-down interval.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby after eight seconds\u003c\/strong\u003e and automatic disconnection from the mains after four hours of inactivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start and stop, automatic reverse on jamming, and a safety stop\u003c\/strong\u003e triggered by an open door or a full bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29-gallon cabinet on casters\u003c\/strong\u003e — unusually large for a high-security machine, and useful because P-7 waste is fine and dusty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-7 (ISO\/IEC 21964 \/ DIN 66399: P-7 F-3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro cut (particle cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e0.8 x 5 mm (4 mm² per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e4–5 sheets at 70 g\/m²; 3–4 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12.2 in (310 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 gallons (110 litres)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e500 W (rated 3\/4 HP on Kobra's US datasheet), 24-hour continuous duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54–55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.2 x 17.2 x 35.2 in (53 x 43 x 88 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e110 lb (50 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper and films\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder head and its 29-gallon caster-mounted cabinet ship as one assembled unit, together with the power cord and the operating manual. \u003cstrong\u003eWaste bags are not included\u003c\/strong\u003e and neither is a spare bottle of Kobra cutting-head oil; both are ordinary consumables and are worth adding to the first order so the machine is usable on day one.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is a machine for a specific requirement: destruction of classified, Top Secret or otherwise compartmented paper records where the governing policy names NSA\/CSS 02-01 or DIN P-7. Government contractors, defence suppliers, embassies and legal teams handling protectively marked material are the buyers. The touch-screen chassis and the 29-gallon bin make it far more pleasant to live with than a compact high-security machine.\u003c\/p\u003e\u003cp\u003eDo not buy it as a general office shredder. Four or five sheets a pass is a fifth of what the \u003cstrong\u003eKOBRA 270 TS S5\u003c\/strong\u003e on the same chassis manages, and shredding a single archive box would take an afternoon. If you need personal-data destruction rather than classified destruction, the \u003cstrong\u003eKOBRA 270 TS C4 AO\u003c\/strong\u003e at P-4 is the sensible machine and takes 24–26 sheets. If you want P-7 in a smaller, cheaper package and can live without the touch panel and the big bin, the \u003cstrong\u003eKOBRA 300 HS-6\u003c\/strong\u003e gives the identical 0.8 x 5 mm cut in a 22-gallon classic-line cabinet. Note too that this head takes paper and film only — there is no optical media unit on the HS-6 build.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690371887168,"sku":"270 TS HS6 AUTO OILER","price":2770.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/00b2815e-cda6-4538-b761-d3431d71ec30_5e5ff44f-dff6-4934-babb-897192aef230.jpg?v=1754951643"},{"product_id":"270-ts-s4","title":"KOBRA 270 TS S4","description":"\u003cp\u003eThe KOBRA 270 TS S4 is the narrow-strip member of the 270 TS touch-screen line: 3.8 mm strips, 27 to 29 sheets a pass, and a 24-hour continuous duty motor behind a capacitive touch panel. Its distinguishing feature within the family is the balance it strikes — a tighter strip than the S5 without giving up much throughput, which makes it the default choice when an office wants bulk destruction of non-sensitive paper but does not want strips wide enough to read.\u003c\/p\u003e\u003cp\u003eEverything except the cutting head is shared with the S5, the C4 AO and the HS-6 AO: the same 12.2 in throat, the same 29-gallon cabinet, the same 500 W continuous-duty motor and the same touch panel. Choosing between them is really choosing a cutting head, and the S4 head is the one tuned for throughput with a strip narrow enough that the waste does not look careless.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.8 mm strip cut, rated P-2.\u003c\/strong\u003e Narrower than the 5.8 mm S5, so text is broken across more strips, while both models sit at the same DIN level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e27–29 sheets per pass at 70 g\/m².\u003c\/strong\u003e High enough to clear archive boxes at a sensible pace rather than sheet by sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate CD\/DVD cutting unit.\u003c\/strong\u003e Discs, credit cards and floppy disks go through a dedicated second head rather than the paper knives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free strip-cut head.\u003c\/strong\u003e Strip knives do not need routine lubrication, so there is no oil consumable to buy or forget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch panel control\u003c\/strong\u003e with LED indicators; holding Forward for five seconds runs the machine continuously for 30 seconds, which is how you feed transparent film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty 500 W motor\u003c\/strong\u003e with thermal protection and no timed cool-down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby after eight seconds\u003c\/strong\u003e and automatic mains disconnection after four hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto start\/stop, automatic reverse on jamming and a safety stop\u003c\/strong\u003e when the door is opened or the bin fills.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-2 (ISO\/IEC 21964 \/ DIN 66399: P-2 O-2 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3.8 mm strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e27–29 sheets at 70 g\/m²; 22–24 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12.2 in (310 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 gallons (110 litres)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e500 W (rated 3\/4 HP on Kobra's US datasheet), 24-hour continuous duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54–55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.2 x 17.2 x 35.2 in (53 x 43 x 88 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e99 lb (45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray and floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder head and its 29-gallon caster-mounted cabinet ship as one assembled unit, together with the power cord and the operating manual. \u003cstrong\u003eWaste bags are not included\u003c\/strong\u003e and neither is a spare bottle of Kobra cutting-head oil; both are ordinary consumables and are worth adding to the first order so the machine is usable on day one.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis machine suits an office that destroys a lot of routine paper — drafts, internal memos, superseded print runs, packing lists — and wants it gone quickly and quietly at 54 to 55 dB(A). The oil-free head and continuous-duty motor mean it needs almost no attention beyond emptying the bin, which is exactly what a shared floor-level machine should demand.\u003c\/p\u003e\u003cp\u003eDo not buy it for regulated data. P-2 strips can, with effort and patience, be reassembled, and no serious privacy programme will accept strip cut for records carrying names, account numbers or health information. For that you want the \u003cstrong\u003eKOBRA 270 TS C4 AO\u003c\/strong\u003e at P-4 on the identical chassis, at the cost of dropping to 24–26 sheets a pass. If you want more raw throughput and the security level is genuinely irrelevant, the \u003cstrong\u003eKOBRA 270 TS S5\u003c\/strong\u003e takes 30–32 sheets with a wider 5.8 mm strip. And if the 29-gallon bin is what fills first, the \u003cstrong\u003eKOBRA 300.2 S4\u003c\/strong\u003e puts a similar strip cut over a 40-gallon cabinet with a 900 W motor.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690371919936,"sku":"270 TS S4","price":1846.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/c20ade3b-048c-4802-94c2-dd08e6e4207f_ea5e1f57-8129-44d0-850f-693a46d1bef0.jpg?v=1754951646"},{"product_id":"270-ts-s5","title":"KOBRA 270 TS S5","description":"\u003cp\u003eOf the four machines built on the KOBRA 270 TS touch-screen chassis, the S5 is the one that gets through paper fastest: 30 to 32 sheets a pass in 5.8 mm strips. It buys that throughput by using the widest cut in the family, which still lands at DIN 66399 \/ ISO 21964 level P-2 but leaves noticeably larger fragments than the 3.8 mm S4. If the job is disposing of bulk non-sensitive paper rather than protecting data, that is a trade worth making.\u003c\/p\u003e\u003cp\u003eKobra publishes two sheet figures for every model in this line, one measured at 70 g\/m² and one at 80 g\/m², and the gap between them is wide. US 20 lb bond paper falls between the two at roughly 75 g\/m², so the honest planning number for an American office is nearer 27 to 29 sheets a pass than the headline 32.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighest sheet capacity in the 270 TS family.\u003c\/strong\u003e 30–32 sheets at 70 g\/m² against 27–29 for the S4 and 24–26 for the P-4 C4 AO.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.8 mm strip cut, rated P-2.\u003c\/strong\u003e Within the 6 mm strip-width ceiling for P-2 under DIN 66399.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate CD\/DVD cutting unit\u003c\/strong\u003e for optical media, credit cards, chip cards and floppy disks, keeping hard media away from the paper knives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free operation.\u003c\/strong\u003e No lubrication schedule and no oil to stock, which suits a machine shared by people who will not maintain it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-hour continuous duty 500 W motor\u003c\/strong\u003e with thermal protection — no timed cool-down between purge boxes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch panel with LED indicators;\u003c\/strong\u003e a five-second press on Forward gives 30 seconds of continuous running for film.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnergy Smart standby after eight seconds\u003c\/strong\u003e and automatic disconnection from the mains after four hours idle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto start\/stop, automatic reverse and safety stop\u003c\/strong\u003e on open door or full bin, with the cabinet on casters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-2 (ISO\/IEC 21964 \/ DIN 66399: P-2 O-2 T-2 E-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5.8 mm strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e30–32 sheets at 70 g\/m²; 24–26 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12.2 in (310 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e29 gallons (110 litres)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e500 W (rated 3\/4 HP on Kobra's US datasheet), 24-hour continuous duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54–55 dB(A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.2 x 17.2 x 35.2 in (53 x 43 x 88 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e99 lb (45 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, chip cards, CDs\/DVDs\/Blu-ray and floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder head and its 29-gallon caster-mounted cabinet ship as one assembled unit, together with the power cord and the operating manual. \u003cstrong\u003eWaste bags are not included\u003c\/strong\u003e and neither is a spare bottle of Kobra cutting-head oil; both are ordinary consumables and are worth adding to the first order so the machine is usable on day one.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eChoose the S5 when the measure of success is how quickly a stack of paper disappears. Print rooms, logistics offices, schools and anywhere that generates large volumes of superseded but unremarkable documents will get the most out of it. The oil-free head, continuous-duty motor and 54 to 55 dB(A) noise level make it an easy machine to place in an open-plan area.\u003c\/p\u003e\u003cp\u003eDo not choose it if anything you destroy is regulated. At 5.8 mm the strips are wide enough that a reasonable amount of text survives on each one, and P-2 will not satisfy a privacy or records-destruction policy. Step up to the \u003cstrong\u003eKOBRA 270 TS C4 AO\u003c\/strong\u003e for a P-4 cross cut on the same chassis, or to the \u003cstrong\u003eKOBRA 270 TS HS-6 AO\u003c\/strong\u003e at P-7 if you handle classified material. If you want a tidier strip without losing much speed, the \u003cstrong\u003eKOBRA 270 TS S4\u003c\/strong\u003e cuts 3.8 mm and gives up only two or three sheets a pass. And if the bin rather than the cutter is your bottleneck, look at the \u003cstrong\u003eKOBRA 300.2 S4\u003c\/strong\u003e with its 40-gallon cabinet.\u003c\/p\u003e","brand":"KOBRA","offers":[{"title":"Default Title","offer_id":40690371952704,"sku":"270 TS S5","price":1450.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/3045be4b-957d-4152-9f35-92756e11711f_b4702157-bf3d-4acd-b2fa-7b35ead491bd.jpg?v=1754951648"},{"product_id":"40530-06050","title":"Dahle 40530 Paper Shredder w\/Automatic Oiler, Jam Protection, SmartPower, Extreme Cross Cut, Security Level P-6, 10 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle 40530 is the department-scale version of Dahle's P-6 cut, and the only one of the three that widens the throat. Where the 40330 and 40430 feed through 10.25 inches, the 40530 opens to 12 inches, holds 38 gallons and takes ten sheets a pass - all at the same 0.8 x 11.1 mm particle, around 8.8 mm2. It is the machine for five or more people who all need a high-security cut and cannot afford to queue at a six-sheet deskside unit.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch feed opening.\u003c\/strong\u003e The widest throat of the three P-6 models. It handles wider stock and misaligned stacks with less fuss, and whole file folders go in more easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-gallon bin.\u003c\/strong\u003e Eight gallons more than the 40430 and fifteen more than the 40330 - fewer interruptions on a shared machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTen sheets a pass.\u003c\/strong\u003e Ten sheets of #20 bond, twelve of #16, at P-6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.8 mm2 particle.\u003c\/strong\u003e 0.8 x 11.1 mm, inside DIN 66399's 10 mm2 limit for P-6. Dahle calls this Extreme Cross Cut; under DIN it is a micro-cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 dB.\u003c\/strong\u003e Quieter than the smaller 40430 despite the larger cabinet, and only 3 dB above the very quiet 40330.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator.\u003c\/strong\u003e Continuous oiling across the full width of the cutting cylinders. Oil is a separate consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartPower energy management.\u003c\/strong\u003e SmartPower energy management drops the machine into standby and powers it down after 30 minutes of inactivity, so it is not drawing current overnight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e Overfeed detection with reverse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro Cut (Dahle Extreme Cross Cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/32\" x 7\/16\" (approx. 0.8 x 11.1 mm, about 8.8 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e10 sheets (#20 bond); 12 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e12 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e38 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e50 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e29\" W x 20\" D x 34.5\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e146 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper. Not rated by Dahle for CDs, DVDs or credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20726\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; 1 year on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle does not publish a full carton packing list. Expect the shredder on its 38-gallon cabinet with the power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e - the 38-gallon bin falls into the range covered by Dahle 20726 bags (31-55 gallon shredders, 100 per box), not the 20725 bags used by the smaller cabinets in this family. Lubricator oil is separate: Dahle 20721 (12 oz) or 20722 (1 gallon).\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 40530 if a department of five or more has to work to P-6 and the smaller cabinets are becoming a bottleneck. The wider throat is the practical daily difference - stacks do not need to be squared up as carefully, and awkward paper goes in without a fight. At 146 lb on castors it is a fixed installation; decide where it lives before it arrives.\u003cbr\u003e\u003cbr\u003eDo not buy it for a small team. Six or eight people's worth of paper will not fill 38 gallons quickly, and the \u003cstrong\u003eDahle 40430\u003c\/strong\u003e gives the identical cut in a smaller cabinet for less money, or the \u003cstrong\u003eDahle 40330\u003c\/strong\u003e smaller and quieter still. Do not buy it for mixed media - Dahle does not rate it for CDs, DVDs or credit cards, and staples and clips should be removed. And it is not an NSA machine: P-6 does not meet NSA\/CSS 02-01 and the 40530 is not on the Evaluated Products List. The \u003cstrong\u003eDahle 40434\u003c\/strong\u003e is the EPL-listed option if that is the requirement.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514277952,"sku":"40530-06050","price":2445.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/m6if8j3zjcynqcezxt3g.jpg?v=1754950795"},{"product_id":"50514-12709","title":"Dahle 50514 Oil-Free Paper Shredder w\/Jam Protection, SmartPower, Solid Milled Cylinders, Shreds CDs, Security Level P-4, 26 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle 50514 takes the biggest bite of any machine in this range: 26 sheets in a single pass, into a 38-gallon bin. It is a department-class P-4 shredder, which in practice means it is sized for a floor rather than a room - one machine that a group of five or more people feed with armfuls of paper. Dahle gears it slower than the office models, 16 ft\/min against 20, because it is built to pull thick stacks rather than to sprint through thin ones.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 sheets per pass at 20 lb bond.\u003c\/strong\u003e The highest single-pass rating in this batch, and the reason the 50514 suits batch clear-outs rather than page-at-a-time use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-gallon waste bin.\u003c\/strong\u003e Eight gallons more than the office 504xx models, which is the difference between emptying weekly and emptying twice a week on a shared machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain-driven, continuous-duty motor.\u003c\/strong\u003e Dahle specifies a chain drive for slip-free power, and rates the motor for continuous duty rather than intermittent office use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecision-milled solid cutting cylinders.\u003c\/strong\u003e Milled from solid stock rather than assembled from stamped discs, which is what allows the head to take CDs and DVDs as well as paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch feed opening.\u003c\/strong\u003e Accepts 11 x 17 tabloid flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting head.\u003c\/strong\u003e No lubricant and no oiling schedule, on a machine that would otherwise be the most maintenance-hungry class in the range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-year warranty with lifetime cutting cylinders.\u003c\/strong\u003e Dahle's published coverage for the oil-free department line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 (optical media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e26 sheets at 20 lb bond (28 at 16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed \/ throat width\u003c\/th\u003e\n\u003ctd\u003e12 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWaste bin volume\u003c\/th\u003e\n\u003ctd\u003e38 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e16 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e52 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e20 x 29 x 34.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e141 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eOil-free - no lubricant required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years; lifetime on cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50514-12709\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFigures above are as published by Dahle for this model. Dahle quotes sheet capacity under ideal conditions - new cutting cylinders, a cold motor and a supply at nominal voltage and frequency. Dahle does not publish a motor wattage, amperage or duty-cycle figure for this shredder.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDahle does not publish a full packing list for this model. What ships is the assembled shredder on its waste-bin cabinet with lockable casters, the power cord and the instruction manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred bags are not included.\u003c\/strong\u003e The 38 gallons bin takes Dahle shred bags item #20726, sold separately in boxes of 100.\u003c\/li\u003e\n\u003cli\u003eNo oil, oiling sheets or lubricant of any kind are required or supplied - this cutting head runs dry by design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the right machine for centralized shredding: a records room, a finance or HR department that purges files on a schedule, or a shared machine on a floor of five to fifteen people. The 38-gallon bin and the 26-sheet pass are what make that workable - the limiting factor on a shared shredder is almost always how often somebody has to stop and change a bag.\u003c\/p\u003e\u003cp\u003eIt is over-specified for a three-person office; the \u003cstrong\u003eDahle 50414\u003c\/strong\u003e or \u003cstrong\u003e50464\u003c\/strong\u003e cost less, weigh 20-45 pounds less and do the same P-4 job. If your problem is paper width rather than volume, the \u003cstrong\u003eDahle 50564\u003c\/strong\u003e has a 16-inch throat and a 45-gallon bin but takes fewer sheets per pass (22) - it is a different trade, not a straight upgrade. And if you need better than P-4, nothing in the 505xx line will do it; the \u003cstrong\u003eCleanTEC 41534\u003c\/strong\u003e is the department-scale P-7 machine, at 8 sheets per pass.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514310720,"sku":"50514-12709","price":2142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/z8hay4nbzijb00lvlxpe_7ab09dea-2bc6-44ed-844d-e1da0399629d.jpg?v=1754950798"},{"product_id":"50564-12772","title":"Dahle 50564 Oil-Free Paper Shredder w\/Jam Protection, SmartPower, German Engineered, 22 Sheet Max, Security Level P-4, 5+ Users","description":"\u003cp\u003eThe Dahle 50564 exists for one reason: a 16-inch feed opening. That is four inches wider than any other machine in this range and it is what lets a department feed tabloid, folded plans and oversized printouts without pre-folding them. It pairs that with the largest bin here, 45 gallons. The trade is per-pass capacity - 22 sheets against the 26 of the narrower 50514 - and a little more noise at 54 dB.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening.\u003c\/strong\u003e The widest throat in Dahle's oil-free line. Tabloid, ledger and folded larger formats go in flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45-gallon waste bin.\u003c\/strong\u003e The largest capacity in this comparison, sized so a centralized machine is not emptied mid-day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 sheets per pass at 20 lb bond.\u003c\/strong\u003e Enough for continuous department use, though lower than the 50514 because the cutting head is spread across a wider span.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain-driven motor for slip-free performance.\u003c\/strong\u003e Dahle specifies a chain drive to keep a 16-inch cylinder set turning under uneven loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrident Grip jam protection.\u003c\/strong\u003e Three continuous points of contact, which matters more on a wide throat where a stack can enter off-square.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting head.\u003c\/strong\u003e No lubricant and no oiling schedule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-year warranty with lifetime cutting cylinders.\u003c\/strong\u003e Dahle's published coverage for the 505xx oil-free line.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 (optical media)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e22 sheets at 20 lb bond (24 at 16 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFeed \/ throat width\u003c\/th\u003e\n\u003ctd\u003e16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWaste bin volume\u003c\/th\u003e\n\u003ctd\u003e45 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e20 x 29 x 38 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e155 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eOil-free - no lubricant required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years; lifetime on cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer part number\u003c\/th\u003e\n\u003ctd\u003e50564-12772\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFigures above are as published by Dahle for this model. Dahle quotes sheet capacity under ideal conditions - new cutting cylinders, a cold motor and a supply at nominal voltage and frequency. Dahle does not publish a motor wattage, amperage or duty-cycle figure for this shredder.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDahle does not publish a full packing list for this model. What ships is the assembled shredder on its waste-bin cabinet with lockable casters, the power cord and the instruction manual.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred bags are not included.\u003c\/strong\u003e The 45 gallons bin takes Dahle shred bags item #20726, sold separately in boxes of 100.\u003c\/li\u003e\n\u003cli\u003eNo oil, oiling sheets or lubricant of any kind are required or supplied - this cutting head runs dry by design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy the 50564 if the paper you destroy is not all letter-size. Architecture and engineering practices, print rooms, marketing departments clearing proofs, and anyone purging ledger-format financial records get real value from the 16-inch throat - folding wide paper before shredding is both slow and the main cause of jams on narrower machines. The 45-gallon bin makes it a genuine centralized machine.\u003c\/p\u003e\u003cp\u003eIf everything you shred is letter or legal, the extra width buys you nothing and costs you four sheets per pass; the \u003cstrong\u003eDahle 50514\u003c\/strong\u003e is the better department machine at 26 sheets and 38 gallons for a smaller footprint and 14 fewer pounds. For a room-sized office rather than a floor, the \u003cstrong\u003e50464\u003c\/strong\u003e at 24 sheets and 12 inches is enough. And note this is a P-4 machine - if you need finer, the 505xx chassis is not offered at a higher security level and you should be looking at the CleanTEC P-7 range, which tops out at 8 sheets per pass and a 12-inch throat. Nor is dust filtration available on this chassis: Dahle does not build a CleanTEC version of the 505xx department machines, so if airborne paper dust is a concern in your records room, that has to be solved with room ventilation rather than at the shredder.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514343488,"sku":"50564-12772","price":2136.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/cztxzrai1nmgxzjpoqwy_cc24d859-8700-4dae-96f7-8feb723600ed.jpg?v=1754950802"},{"product_id":"51514-13705","title":"DAHLE CleanTEC 51514 Oil-Free Paper Shredder w\/Fine Dust Filter, Jam Protection, SmartPower, Security Level P-4, 26 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle CleanTEC 51514 is the entry point to the department range and the highest-throughput machine in this group: 26 sheets a pass at DIN P-4, oil-free, into a 38-gallon bin. Where the 30-gallon office models are sized for a team, the 51514 is sized for a floor — and because the cylinders need no lubricant, it survives being shared by people who will never think about maintenance.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 sheets per pass\u003c\/strong\u003e at 20 lb bond (28 at 16 lb) — the highest single-pass capacity of any machine in this batch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders.\u003c\/strong\u003e No oiler, no oil sheets, no consumable lubricant. On a shared department machine this removes the failure mode nobody owns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-gallon waste bin\u003c\/strong\u003e, a 27% jump over the office cabinets, meaning fewer interruptions on a floor-sized workload.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC filtration\u003c\/strong\u003e capturing up to 98% of fine dust; replacement filter item 20710.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch throat\u003c\/strong\u003e for letter, legal and 11 x 17 tabloid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 paper and O-3 optical media\u003c\/strong\u003e, so CDs, DVDs, credit cards, staples and paper clips all go in the same machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain-driven continuous-duty motor\u003c\/strong\u003e, thermally protected, on rubber shock mounts; 52 dB, 18 ft\/min. Trident Grip jam protection and Matrix cutting cylinders with a lifetime cylinder warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399) \/ O-3 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e26 sheets (20 lb bond) \/ 28 sheets (16 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e18 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e38 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e52 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e20 in W x 29 in D x 34.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e143 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine \/ lifetime cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 1\/8\" x 1 9\/16\" particle is approximately 3.2 x 40 mm, near 126 mm², inside DIN 66399's 160 mm² limit for P-4. Sheet ratings are Dahle's figures for 8.5 x 11 in paper at #20 and #16 bond.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe shredder arrives on its department cabinet with lockable casters and the CleanTEC filter installed. Waste bags are \u003cstrong\u003enot\u003c\/strong\u003e included — the correct part for a 38-gallon bin is Dahle item 20726 (fits 31–55 gallon, 100 per box). No shredder oil is required.\u003c\/p\u003e\n\u003ch2\u003ePlacement, Floor Space and Delivery\u003c\/h2\u003e\n\u003cp\u003eDepartment cabinets are furniture, and the 51514 should be sited before it is ordered. The cabinet occupies 20 inches by 29 inches of floor and stands 34.5 inches tall — roughly worktop height, which is deliberate, because the feed slot needs to be comfortable for someone standing with an armful of files. Allow enough clearance in front for the bin drawer to come fully out and for a full 38-gallon bag to be lifted clear without the machine having to be moved. At 143 lb it arrives palletised and wants a flat route from the loading point; the lockable casters make repositioning easy on hard floors and hard work on carpet. Because the CleanTEC filter draws and exhausts air, do not push the cabinet flat against a wall or box it into a cupboard — leaving a few inches behind it keeps the filtration doing what you bought it for.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eChoose the 51514 when the shredder is a shared floor resource and P-4 meets policy: a records room, a finance department, a school administration office, a clinic's central destruction point. It is the machine you buy when the complaint is \"we are always waiting for the shredder\" rather than \"we need a finer cut.\"\u003c\/p\u003e\n\u003cp\u003eIt is not the machine for a P-5 policy. If HR or clinical records must go finer, the 51522 is the same 38-gallon department cabinet at P-5, at 16 sheets a pass and with an automatic oiler fitted. Nor is it right if you routinely feed wide stock or want the largest bin available — the 51564 offers a 16-inch throat and 45 gallons at the same P-4 level, in a taller cabinet. And at 20 x 29 inches on the floor, the 51514 needs real floor space; a three-person office is better served by the 51464.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514441792,"sku":"51514-13705","price":2592.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/z8hay4nbzijb00lvlxpe_0024e76f-772b-4481-be87-68893523794d.jpg?v=1754950804"},{"product_id":"51522-13812","title":"DAHLE CleanTEC 51522 Paper Shredder w\/Fine Dust Filter, Automatic Oiler, Jam Protection, Security Level P-5, 16 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle CleanTEC 51522 puts a P-5 cutting head and an O-4 optical media rating into the 38-gallon department cabinet. That combination is the point of the machine: high security at a bin size meant for shared use, so a records room does not have to choose between a fine particle and a sensible emptying interval.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 P-5 with O-4 optical media.\u003c\/strong\u003e The higher of the two disc-destruction ratings in this range, matched to a paper particle of about 28 mm².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38-gallon bin\u003c\/strong\u003e — and because a P-5 particle packs tightly, a 38-gallon bag holds a great deal of paper before the bin-full sensor trips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvenFlow Lubricator\u003c\/strong\u003e feeds oil continuously across the cutting cylinders while running. P-5 cylinders require lubrication and this is what stops it being forgotten on a shared machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC filter\u003c\/strong\u003e traps up to 98% of fine paper dust inside the cabinet; replacement item 20710.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-inch throat\u003c\/strong\u003e takes letter, legal and 11 x 17 tabloid flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 sheets per pass\u003c\/strong\u003e at 20 lb bond (18 at 16 lb), 18 ft\/min, 53 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrident Grip jam protection\u003c\/strong\u003e, Matrix High Performance cylinders under a lifetime cylinder warranty, chain-driven continuous-duty motor on rubber shock mounts, SmartPower standby shutdown, lockable casters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-5 (DIN 66399) \/ O-4 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/13\" x 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets (20 lb bond) \/ 18 sheets (16 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e18 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e38 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e53 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e20 in W x 29 in D x 34.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e154 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine \/ lifetime cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAt roughly 2 x 15 mm the particle is about 28 mm², inside the 30 mm² DIN 66399 permits at P-5. Dahle's US literature calls this cut cross-cut; by area it belongs in what most buyers call micro-cut territory. Sheet figures are for 8.5 x 11 in paper at #20 and #16 bond.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eAssembled department cabinet with lockable casters, CleanTEC filter fitted, oiler reservoir filled. Waste bags are \u003cstrong\u003enot\u003c\/strong\u003e included — use Dahle item 20726 (31–55 gallon, 100 per box). Oil refills are item 20721 (12 oz) or 20722 (1 gallon); spare filters are 20710.\u003c\/p\u003e\n\u003ch2\u003eConsumables and Part Numbers\u003c\/h2\u003e\n\u003cp\u003eKeeping a shared department machine supplied is easier when the part numbers are written down somewhere other than the original invoice. For the 51522 the list is short. Waste bags are Dahle item 20726, which covers 31 to 55 gallon bins and comes 100 to a box — note this is a different part from the 20725 bags used on the 30-gallon office cabinets, and ordering the wrong one is a common irritation. The CleanTEC air filter is item 20710, shared across the CleanTEC range. Shredder oil for the EvenFlow Lubricator is item 20721 in a 12 oz bottle or 20722 by the gallon; a department machine will get through more than an office one, so the gallon is usually the sensible purchase. Nothing else is consumed. The cutting cylinders are covered for the life of the machine and the machine itself for two years.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 51522 where a department shares one machine and the material is regulated: hospital records, insurance claims, legal discovery, payroll. At 154 lb it is the heaviest unit in this batch and it is meant to stay where you put it, moving only for bin changes.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if throughput is the priority. Sixteen sheets a pass is a real constraint against the 51514's 26 in the same cabinet, and if P-4 satisfies your policy the 51514 is faster and needs no oil at all. Do not buy it if you feed anything wider than tabloid or want the largest bin available — the 51572 gives you a 16-inch throat and 45 gallons at the same P-5 level. And a three-person office does not need this machine; the 51472 delivers the identical P-5 particle in a smaller, lighter cabinet.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514507328,"sku":"51522-13812","price":2492.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/afqcs8blwvilesf53k8z.jpg?v=1754950806"},{"product_id":"51564-13907","title":"DAHLE CleanTEC 51564 Oil-Free Paper Shredder w\/Fine Dust Filter, Jam Protection, German Engineered, Security Level P-4, 22 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle CleanTEC 51564 is the wide-mouth machine of this range: a 16-inch throat, a 45-gallon bin and 22 sheets a pass at DIN P-4, running oil-free. If your destruction pile includes anything broader than tabloid — folded plans, wide printouts, oversized forms — this is the model that takes it without anyone reaching for scissors.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch throat\u003c\/strong\u003e, four inches wider than the rest of the CleanTEC cabinets here. Letter, legal and 11 x 17 tabloid all feed with room to spare, and two letter sheets can go in side by side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45-gallon waste bin\u003c\/strong\u003e, the largest in this batch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOil-free cutting cylinders\u003c\/strong\u003e — no lubricant, no oil sheets, nothing to remember.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC dust filtration\u003c\/strong\u003e capturing up to 98% of fine paper dust; filter item 20710.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 ft\/min shred speed\u003c\/strong\u003e, the fastest in this group, with 22 sheets per pass at 20 lb bond (24 at 16 lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 paper with O-3 optical media\u003c\/strong\u003e: CDs, DVDs, credit cards, staples and paper clips accepted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrident Grip jam protection\u003c\/strong\u003e, Matrix High Performance cylinders under a lifetime cylinder warranty, chain-driven continuous-duty motor, rubber shock mounts, SmartPower, bin-full stop, lockable casters. 52 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-4 (DIN 66399) \/ O-3 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e22 sheets (20 lb bond) \/ 24 sheets (16 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e45 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e52 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e20 in W x 29 in D x 38 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e158 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine \/ lifetime cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 1\/8\" x 1 9\/16\" particle works out at roughly 3.2 x 40 mm, about 126 mm², within the 160 mm² DIN 66399 allows at P-4. Sheet capacity is Dahle's rating on 8.5 x 11 in paper at #20 and #16 bond.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder on its 38-inch-tall department cabinet, lockable casters and CleanTEC filter fitted. Waste bags are \u003cstrong\u003enot\u003c\/strong\u003e included; the 45-gallon bin takes Dahle item 20726 (31–55 gallon, 100 per box). No oil is needed.\u003c\/p\u003e\n\u003ch2\u003eFeeding Wide Stock Without Jamming\u003c\/h2\u003e\n\u003cp\u003eA 16-inch throat invites people to feed things a shredder was never sized for, and a little discipline pays back. Sheet ratings are always quoted on 8.5 x 11 in paper — 22 sheets at 20 lb bond here — because what limits a cutting head is the total cross-section of paper it has to pull, not the number of pages. A tabloid sheet is twice the area of a letter sheet, so eleven is the sensible equivalent; a full-width 16-inch sheet, fewer again. Folded plan sheets count double at every fold. The Trident Grip geometry is designed to pull a sheet straight rather than let it skew, which is what makes wide feeding practical in the first place, and the jam protection will back a stack out if you overdo it. But repeated stalling is not good for any cutting head, and on a machine that will be shared across a floor it is worth putting a note on the cabinet stating what a full handful actually is.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThe 51564 belongs in a central destruction point that receives mixed material in bulk: an engineering or architecture practice with wide-format waste, a records centre emptying consolidated confidential bins, a print room disposing of proofs. The wide throat and the 45-gallon bin work together — the machine that takes big sheets also needs somewhere to put them.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if P-5 is written into your policy. The 51572 is the same 16-inch, 45-gallon cabinet at P-5, at 14 sheets a pass and with an automatic oiler. Do not buy it if space is tight: at 20 x 29 inches and 38 inches tall it is a substantial piece of furniture, and a workgroup that only shreds letter-size paper is better served by the 51464 or 51514. And if you only occasionally meet a tabloid sheet, the 12-inch throat on the 51514 is cheaper and gives you four more sheets per pass.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514572864,"sku":"51564-13907","price":2992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/cztxzrai1nmgxzjpoqwy_e3a6f205-d176-4364-8b69-42aae787403d.jpg?v=1754950808"},{"product_id":"51572-13913","title":"DAHLE CleanTEC 51572 Paper Shredder w\/Fine Dust Filter, Automatic Oiler, German Engineered, Security Level P-5, 14 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle CleanTEC 51572 is the top of this range: DIN P-5 paper security and an O-4 optical media rating, fed through a 16-inch throat into a 45-gallon bin. Nothing else in the CleanTEC line here combines the finest cut with the widest opening and the largest bin, and that is the whole argument for it.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 paper and O-4 optical media\u003c\/strong\u003e in a department-scale cabinet — the highest security level offered across this batch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch throat\u003c\/strong\u003e for oversized and wide-format waste as well as letter, legal and tabloid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45-gallon bin\u003c\/strong\u003e paired with a fine particle that packs densely, giving long intervals between bag changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEvenFlow Lubricator\u003c\/strong\u003e oils the cutting cylinders continuously and automatically while the machine runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleanTEC dust filter\u003c\/strong\u003e holding back up to 98% of fine paper dust; replacement filter item 20710.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 ft\/min shred speed\u003c\/strong\u003e, 14 sheets per pass at 20 lb bond (16 at 16 lb), 53 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrident Grip jam protection\u003c\/strong\u003e, Matrix High Performance cylinders with a lifetime cylinder warranty, chain-driven continuous-duty motor on rubber shock mounts, SmartPower standby shutdown, bin-full stop, lockable casters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eP-5 (DIN 66399) \/ O-4 optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParticle size\u003c\/th\u003e\n\u003ctd\u003e1\/13\" x 9\/16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e14 sheets (20 lb bond) \/ 16 sheets (16 lb bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003e20 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e45 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e53 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e20 in W x 29 in D x 38 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e141 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine \/ lifetime cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eThe 1\/13\" x 9\/16\" particle measures roughly 2 x 15 mm, about 28 mm² — inside the 30 mm² DIN 66399 sets for P-5. Dahle's US catalogue labels the cut cross-cut; by particle area it is a micro-cut in ordinary usage. Sheet figures are for 8.5 x 11 in paper at #20 and #16 bond.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDepartment cabinet, 38 inches tall, with lockable casters, CleanTEC filter fitted and the oiler reservoir filled. Waste bags are \u003cstrong\u003enot\u003c\/strong\u003e included — use Dahle item 20726 (31–55 gallon, 100 per box). Oil refills are item 20721 (12 oz) or 20722 (1 gallon); spare filters are 20710.\u003c\/p\u003e\n\u003ch2\u003eWhen P-5 Is Actually Required\u003c\/h2\u003e\n\u003cp\u003eP-5 costs throughput, so it is worth checking whether you need it. DIN 66399 assigns protection classes as well as security levels, and most commercial personal data sits in a band where P-4 is considered adequate. P-5 tends to be specified where the material identifies individuals in a way that would cause real harm if reconstructed — patient records with clinical detail, full financial account data, personnel files, legal discovery covered by a court order — or where a client contract simply names the level. It is also common in organisations that would rather set one standard than argue about categories. What P-5 is not is a government classification standard: NSA\/CSS 02-01 requires a 1 mm x 5 mm particle and listing on the NSA Evaluated Products List, and no CleanTEC machine meets that. If your obligation comes from a commercial contract or a data-protection policy, P-5 answers it. If it comes from a classification marking, it does not.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eThis is a central destruction machine for an organisation whose policy names P-5 and whose waste is not uniform: a hospital records department, a legal practice at the end of a matter, a financial services back office, a design firm destroying client work. The wide throat means nothing has to be trimmed before it goes in, and the 45-gallon bin means the fine cut does not translate into constant bag changes.\u003c\/p\u003e\n\u003cp\u003eDo not buy it for speed. Fourteen sheets a pass is the lowest in the department group, and the P-4 51564 handles 22 in the identical cabinet with no oiler to maintain; if P-4 meets your policy, the 51564 is the better machine. Do not buy it for a small office either — the 51472 delivers the same P-5\/O-4 combination in a cabinet nearly two feet narrower on the floor, and the 51522 sits between the two with a 12-inch throat and a 38-gallon bin. And if you are shopping for NSA-listed destruction, none of these machines qualifies.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691514605632,"sku":"51572-13913","price":2992.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/cztxzrai1nmgxzjpoqwy.jpg?v=1754950811"},{"product_id":"20392-13066","title":"Dahle 20392 High Capacity Paper Shredder w\/Automatic Oiler, Jam Protection, Security Level P-5, Shreds CDs, 26 Sheet Max, 5+ Users","description":"\u003cp\u003eThe Dahle 20392 is the P-5 member of Dahle's 16-inch high-capacity range, and the one to pick when your shredding policy names a particle size rather than a paper volume. Its cutting cylinders reduce a sheet to roughly 1.9 x 14.3 mm fragments, around 28 mm2 each, which places it in DIN 66399 P-5 territory and still lets it swallow 26 sheets of 20 lb bond in one pass. That combination is what separates it from its siblings: the 20396 is faster but only P-4, and the 20394 is P-7 but drops to nine sheets. The 20392 sits between them.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuinely high throughput at P-5.\u003c\/strong\u003e 26 sheets of #20 bond (28 sheets of #16) per pass at 22 ft\/min. Most P-5 machines in this price class take single-digit sheet counts, so a department can keep feeding rather than counting pages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening.\u003c\/strong\u003e Letter, legal and tabloid stock all enter without folding, and file folders go in whole.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShreds more than paper.\u003c\/strong\u003e Rated by Dahle for staples, paper clips, credit cards and CDs \/ DVDs, so purge boxes do not have to be de-stapled first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator.\u003c\/strong\u003e Oil is fed slowly and continuously across the full width of the cutting cylinders instead of arriving in a squeeze-bottle dose once a month. Refill oil (Dahle 20721 or 20722) is a consumable and is bought separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain-driven motor.\u003c\/strong\u003e Dahle drives the cylinders by chain rather than belt, which removes belt slip as a failure mode on a machine this heavy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection.\u003c\/strong\u003e The machine senses an overfeed and reverses before the stack stalls the cylinders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-cylinder warranty.\u003c\/strong\u003e Dahle covers the machine for two years and the cutting cylinders for life. That lifetime cylinder cover applies to the P-3, P-4 and P-5 models in this range and is not offered on Dahle's P-6 and P-7 machines.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5 | O-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/13\" x 9\/16\" (approx. 1.9 x 14.3 mm, about 28 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e26 sheets (#20 bond); 28 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShredding speed\u003c\/th\u003e\n\u003ctd\u003e22 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e50 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e29.5\" W x 24.5\" D x 46.75\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e359 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs \/ DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20726\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; lifetime on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle does not publish a full carton packing list for this model. What ships is the shredder on its cabinet with the 50-gallon bin and the power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e - order Dahle 20726 bags (31-55 gallon range, 100 per box) separately. Lubricating oil for the EvenFlow Lubricator is also a separate consumable (Dahle 20721, 12 oz, or 20722, 1 gallon).\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 20392 if a written retention or privacy policy specifies P-5, and you still need a machine that a floor of people can share without queueing. At 359 lb on castors it is a fixture, not something you move between rooms; plan the location before it is delivered and confirm the freight route.\u003cbr\u003e\u003cbr\u003eDo not buy it if what you actually need is volume at a lower security level - the \u003cstrong\u003eDahle 20396\u003c\/strong\u003e is the same chassis, same 16-inch throat and same 50-gallon bin, but takes 38 sheets a pass at P-4. Equally, do not buy it if you handle classified material: P-5 is not P-7 and this model is not on the NSA\/CSS Evaluated Products List. For that requirement the \u003cstrong\u003eDahle 20394\u003c\/strong\u003e is the machine in this chassis, at nine sheets a pass. And if your office is small, a 50-gallon bin will sit half-empty for weeks - a 23-gallon deskside cabinet is the better fit.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516375104,"sku":"20392-13066","price":5324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/jcpwzaygfyorrnuzdnnk.jpg?v=1754950831"},{"product_id":"20396-13067","title":"Dahle 20396 High Capacity Paper Shredder w\/Automatic Oiler, Jam Protection, Security Level P-4, Shreds CDs, 38 Sheet Max, 5+ Users","description":"\u003cp\u003eIf the job is to get rid of a great deal of paper quickly and to a defensible commercial standard, the Dahle 20396 is the model in this chassis that does it. Thirty-eight sheets of #20 bond per pass is roughly 50 percent more than any other machine sharing its 16-inch throat and 50-gallon bin, and it still meets DIN 66399 P-4 at a 3.2 x 39.7 mm particle. The trade is security level: this is the least secure and the fastest of the three high-capacity models.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e38 sheets a pass.\u003c\/strong\u003e 38 sheets of #20 bond, 42 of #16, at 22 ft\/min. That is the highest sheet rating in Dahle's high-capacity line and the reason to choose this model over the P-5 20392.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 at 127 mm2.\u003c\/strong\u003e The 1\/8\" x 1 9\/16\" particle works out to roughly 127 mm2, inside the 160 mm2 ceiling DIN 66399 sets for P-4. P-4 is the usual benchmark for commercial confidential material and personal data.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch throat.\u003c\/strong\u003e Letter, legal, tabloid and whole file folders all enter unfolded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles the awkward items.\u003c\/strong\u003e Rated for staples, paper clips, credit cards and CDs \/ DVDs, so a mixed purge box does not need sorting first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator.\u003c\/strong\u003e Slow, continuous oil across the full cylinder width. Oil is a separate consumable (Dahle 20721 or 20722).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic jam protection and chain drive.\u003c\/strong\u003e Overfeed detection with reverse, and a chain-driven motor rather than a belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-cylinder warranty.\u003c\/strong\u003e Two years on the machine, life on the cylinders - Dahle's best cylinder cover, offered on its P-3 to P-5 models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 | O-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" x 1 9\/16\" (approx. 3.2 x 39.7 mm, about 127 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e38 sheets (#20 bond); 42 sheets (#16 bond)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShredding speed\u003c\/th\u003e\n\u003ctd\u003e22 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ feed width\u003c\/th\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e50 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e64 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e29.5\" W x 24.5\" D x 46.75\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e359 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs \/ DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMatching shred bag\u003c\/th\u003e\n\u003ctd\u003eDahle 20726\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years on the machine; lifetime on the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eDahle does not publish motor wattage, current draw or a rated continuous duty cycle for this model, so those figures are deliberately omitted rather than estimated.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eDahle does not publish a full packing list for the 20396. Expect the shredder on its cabinet with the 50-gallon bin and power cord. Shred bags are \u003cstrong\u003enot included\u003c\/strong\u003e; the matching consumable is Dahle 20726 (31-55 gallon shredders, 100 bags per box). Lubricator oil is also bought separately - Dahle 20721 (12 oz) or 20722 (1 gallon).\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 20396 for records rooms, mailrooms, clinics and finance departments that generate real paper volume and whose policy calls for P-4. It is the fastest machine on this chassis by a wide margin, it eats staples and clips, and it kills old CDs and expired cards without a second device.\u003cbr\u003e\u003cbr\u003eDo not buy it if a written policy specifies P-5 or higher - a 127 mm2 particle is legitimate P-4 and nothing more. Step up to the \u003cstrong\u003eDahle 20392\u003c\/strong\u003e for P-5 in the identical cabinet, at the cost of dropping to 26 sheets, or to the \u003cstrong\u003eDahle 20394\u003c\/strong\u003e for NSA-listed P-7 at nine sheets. Also think twice if the machine is going into a quiet open-plan space: at 64 dB the 20396 is the loudest model in this chassis, and at 359 lb it needs a planned delivery route and a permanent home. A small team clearing a few dozen pages a day does not need a 50-gallon cabinet.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516407872,"sku":"20396-13067","price":5324.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/jcpwzaygfyorrnuzdnnk_ee41515e-27c1-448b-acc6-2d706952c5c2.jpg?v=1754950833"},{"product_id":"20423-15196","title":"Dahle PowerTEC 909 HS Industrial Shredder","description":"\u003cp\u003eThe Dahle PowerTEC 909 HS is a hand-fed industrial shredder with a 17.5-inch throat - the widest manual feed in the PowerTEC range - that takes 85 sheets in a single pass at DIN class P-3. It is the model for organisations that have outgrown office equipment but do not want a conveyor. Everything still goes in by hand through one wide opening, which keeps the operator in control of what enters the machine, while a 5 HP chain-driven motor and a 68-gallon roll-out bin handle the volume. Where the 919 IS and 929 IS trade operator oversight for belt-fed throughput, the 909 HS keeps a person at the throat.\u003c\/p\u003e\u003cp\u003eThe installation is the main commitment. A 220 V three-phase supply has to be commissioned before delivery, and at 992 lb the machine needs dock or liftgate access and a floor that will take the load. Once running, ownership is simple: lubricant for the automatic oiler, cutting cylinders as a wear part under a one-year warranty, and a roll-out bin that nobody has to lift. Because the 909 HS accepts staples, clips and cards, the labour saving is not only in shredding speed but in everything that would otherwise happen before a document reaches the throat.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e17.5-inch throat.\u003c\/strong\u003e Legal, tabloid and lengthwise folders all go in flat. It is 1.5 inches wider than the belt feed on the 919 IS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85 sheets per pass.\u003c\/strong\u003e 85 sheets of #20 bond, 90 of #16 bond. A records box can be fed in handfuls rather than sheet by sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerant of fasteners and cards.\u003c\/strong\u003e Dahle lists paper, optical media, credit cards, staples and paper clips as accepted materials, so documents can go in as they arrive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 HP chain-driven continuous-duty motor.\u003c\/strong\u003e 39 ft\/min with automatic jam protection, thermal protection and a self-cleaning cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e68-gallon roll-out bin.\u003c\/strong\u003e The largest waste capacity of any hand-fed machine here, on a framed roll-out chassis so nobody lifts it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator®.\u003c\/strong\u003e Continuous oiling of the cutting cylinders, which matters when staples and clips are in the diet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e4 x 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e85 sheets (#20 bond) \/ 90 sheets (#16 bond), 8.5 x 11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e17.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e68 gallons, roll-out bin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e39 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e5 HP chain-driven continuous-duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220 V, 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e60 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e30 x 30 x 64.25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e992 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, CDs and DVDs, credit cards, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eShips as a single 992 lb cabinet with the cutting head, automatic lubricator and framed roll-out bin fitted. Bags are not included and Dahle publishes no bag part number for this model - source liners sized for the 68-gallon bin separately. A 220 V three-phase supply must be in place before delivery, and you will need dock or liftgate access.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBuy the 909 HS if\u003c\/strong\u003e you shred by the box, you want an operator watching what goes in, and P-3 satisfies your retention policy. Records centres, hospital archives and finance back-offices are the natural home for it. The staple and clip tolerance is the practical difference from any high security machine - preparation time drops to almost nothing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e your material arrives in bulk and unsorted. Feeding 85 sheets at a time by hand still means somebody standing at the machine all afternoon; the \u003cstrong\u003e919 IS\u003c\/strong\u003e puts a conveyor belt in front of the same P-3 class and adds binder capability, and the \u003cstrong\u003e929 IS\u003c\/strong\u003e takes 500 sheets a pass. Equally, do not buy it if you handle classified or top-secret paper - P-3 is a commercially confidential class, not a high security one. That requires the \u003cstrong\u003e707 PS\u003c\/strong\u003e or \u003cstrong\u003e727 CS\u003c\/strong\u003e at P-7.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516440640,"sku":"20423-15196","price":12340.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/aa9i7xoyhlo3f5gjiqqk.jpg?v=1754950835"},{"product_id":"20415-15197","title":"Dahle PowerTEC 919 IS Conveyor Shredder","description":"\u003cp\u003eThe Dahle PowerTEC 919 IS puts a 16-inch conveyor belt in front of a 5 HP P-3 cutting head, which changes what the operator's job is: instead of feeding sheets, they load stacks and walk away. Dahle rates it for whole binders as well as paper and optical media, so ring binders and lever arch files can go in without being stripped first - the single biggest time saving available in a records clearance. It is the mid-size machine in the 900 series, sitting between the hand-fed 909 HS and the 3,175 lb 929 IS.\u003c\/p\u003e\u003cp\u003eOne thing worth planning for is where the shredded waste goes. The 919 IS is fed faster than a hand-fed machine and holds less - 45 gallons against 68 on the 909 HS - so a single bin can become the limiting factor in a sustained clearance. Dahle offers the 919 CB output conveyor for exactly this, moving material to a larger container or a baler. Otherwise ownership is conventional for the range: lubricant for the automatic oiler, cutting cylinders as a one-year-warranted wear part, and a 220 V three-phase supply commissioned before the machine arrives.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch infeed conveyor.\u003c\/strong\u003e Load stacks onto the belt and let the machine set the pace. Operator time drops from continuous feeding to periodic loading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for binders.\u003c\/strong\u003e Dahle lists stacks of paper, optical media and binders as accepted materials - ring binders do not have to be dismantled first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85 sheets per pass at P-3.\u003c\/strong\u003e 85 sheets of #20 bond or 90 of #16 bond, cut to 5 x 40 mm, which is 200 mm2 and comfortably inside the 320 mm2 P-3 limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 HP chain-driven continuous-duty motor.\u003c\/strong\u003e 39 ft\/min with automatic jam protection, self-cleaning mode and thermal protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge emergency stop bar.\u003c\/strong\u003e A full-width stop bar rather than a button - the right control for a belt-fed machine where the operator's hands are full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional 919 CB output conveyor.\u003c\/strong\u003e An output belt is available if you want shredded waste moved into a baler or a larger container rather than a bin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator®.\u003c\/strong\u003e Continuous oil to the cutting cylinders, which a machine ingesting binder board and metal rings needs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e85 sheets (#20 bond) \/ 90 sheets (#16 bond), 8.5 x 11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeed width\u003c\/th\u003e\n\u003ctd\u003e16 in conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e45 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e39 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e5 HP chain-driven continuous-duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220 V, 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e65 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e52 x 47.25 x 48.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1,080 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003eStacks of paper, binders, optical media, credit cards, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptional accessory\u003c\/th\u003e\n\u003ctd\u003e919 CB output conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied as one 1,080 lb machine with the infeed conveyor, cutting head, automatic lubricator and 45-gallon waste bin. The 919 CB output conveyor is a separate purchase and is not included. Bags are not included and no bag part number is published. A 220 V three-phase supply is required, and the 52 x 47.25 in footprint needs clear access on the infeed side.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBuy the 919 IS if\u003c\/strong\u003e the volume is real and the material is messy - archive boxes, ring binders, mixed office paper with fasteners still in it. The conveyor plus binder capability is what makes it a genuinely different machine from the 909 HS rather than just a bigger one.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e your throat width matters more than your throughput: the hand-fed \u003cstrong\u003e909 HS\u003c\/strong\u003e has a wider 17.5-inch opening, a bigger 68-gallon bin and is 5 dB quieter, for less money. Note also that the 919 IS bin is only 45 gallons - smaller than the 909 HS - so at high throughput you will be emptying it more often unless you add the 919 CB output conveyor. If you are clearing an entire building's archive, the \u003cstrong\u003e929 IS\u003c\/strong\u003e takes 500 sheets a pass into a 120-gallon container. And P-3 is a commercially confidential class: classified paper needs the \u003cstrong\u003e707 PS\u003c\/strong\u003e or \u003cstrong\u003e727 CS\u003c\/strong\u003e at P-7.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516473408,"sku":"20415-15197","price":13990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/oihjmhbhbqewmwe9boio.jpg?v=1754950838"},{"product_id":"20445-15199","title":"Dahle PowerTEC 929 IS Conveyor Shredder","description":"\u003cp\u003eThe Dahle PowerTEC 929 IS is the largest machine Dahle builds in this range and it is bought for one number: 500 sheets in a single pass. An 11.5 HP motor drives a 21.5-inch conveyor feed into a P-3 cutting head, and the output falls into a 120-gallon container. At 3,175 lb it is a fixed installation with a three-phase supply and a floor-loading question attached - this is destruction plant for a service bureau, a large records centre or a facility clearing archives by the pallet, and it should not be compared with office equipment.\u003c\/p\u003e\u003cp\u003eThink of the 929 IS as a process rather than an appliance. It needs material staged in front of it to be worth running, a second waste container or a downstream handling route, an operator who is not doing anything else, and hearing protection for a full shift beside a 70 dB machine. Ownership costs are lubricant for the automatic oiler and cutting cylinders as a wear part under a one-year warranty. None of that is unusual for destruction plant of this size, but it is a long way from plugging in a shredder, and the specification should be written accordingly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 sheets per pass.\u003c\/strong\u003e Roughly six times the capacity of the 919 IS. Whole archive files go onto the belt intact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e21.5-inch conveyor feed.\u003c\/strong\u003e The widest infeed in the range, sized for the stacks that come straight out of a records box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11.5 HP chain-driven continuous-duty motor.\u003c\/strong\u003e Enough torque to keep a 33 ft\/min cut rate under continuous bulk loading without stalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120-gallon waste container.\u003c\/strong\u003e More than double the 45 gallons on the 919 IS, because a machine this fast fills a bin fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for binders and fasteners.\u003c\/strong\u003e Paper, binders, optical media, credit cards, staples and paper clips are all listed - material does not need sorting before it goes on the belt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic EvenFlow Lubricator® and jam protection.\u003c\/strong\u003e Continuous oiling and automatic reverse cycling, which is not optional on a machine running all day.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e8 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e500 sheets per pass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeed width\u003c\/th\u003e\n\u003ctd\u003e21.5 in conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste volume\u003c\/th\u003e\n\u003ctd\u003e120 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e33 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e11.5 HP chain-driven continuous-duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220 V, 3-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e70 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e78.75 x 48 x 64.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e3,175 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003eStacks of paper, binders, optical media, credit cards, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e1 year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDelivered as a 3,175 lb machine with the infeed conveyor, cutting head, automatic lubricator and 120-gallon waste container. Bags are not included and no bag part number is published. Installation requires a 220 V three-phase supply, a dock or heavy liftgate, a route wide enough for a 78.75-inch machine, and a floor rated for the load. Confirm all four before ordering.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBuy the 929 IS if\u003c\/strong\u003e shredding is a production process for you rather than a housekeeping task - a commercial destruction service, a hospital or bank records centre, a government facility clearing decades of archive. Nothing smaller in this range will keep up, and running a 919 IS at 929 IS volumes simply moves the bottleneck to the operator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e the volume is occasional. A 3,175 lb machine idling in a corner is expensive floor space, and the \u003cstrong\u003e919 IS\u003c\/strong\u003e gives you the same P-3 class, the same binder capability and a conveyor for a fraction of the installation cost. Note too that the cut is coarser here: 8 x 40 mm against 5 x 40 mm on the 919 IS. At 320 mm2 the 929 IS sits exactly on the DIN P-3 limit, so there is no margin - if you want headroom against a P-3 audit, the 919 IS is the safer specification. For classified paper, neither machine applies; that is P-7 territory and the \u003cstrong\u003e707 PS\u003c\/strong\u003e or \u003cstrong\u003e727 CS\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Dahle","offers":[{"title":"Default Title","offer_id":40691516506176,"sku":"20445-15199","price":26990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/wa8lwhoqiylqismfu7n1.jpg?v=1754950840"},{"product_id":"297134","title":"intimus 297134 175CP4 5\/32\" X1-3\/16\"","description":"\u003cp\u003eThe intimus 175 CP4 is a floor-standing departmental shredder for a busy office floor: a 405 mm (16 in) feed opening, a 175-litre bin and a 1,100 W drive that takes up to 43 sheets of 80 g\/m² paper in a single pass. Among the 175 models it is the fast one — a 4 x 40 mm particle sits exactly on the 160 mm² boundary that DIN 66399 sets for P-4, so it delivers the security level most policies ask for and nothing slower than it has to be.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 in feed opening.\u003c\/strong\u003e Tabloid and ledger sheets go in flat, and so do file folders without being squared up first. That is the single biggest practical difference between this machine and a deskside unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 43 sheets per pass at 80 g\/m²\u003c\/strong\u003e — intimus North America quotes up to 50 sheets per pass and up to 1,110 sheets per minute on lighter US stock. Both figures describe the same machine at different paper weights; check which one your comparison is using.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46.25-gallon (175 litre) bin.\u003c\/strong\u003e Sized so a floor of ten or more people is not emptying it daily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ei-Control smart switch with dynamic load sensing.\u003c\/strong\u003e The panel indicates whether you are feeding at the right rate, which materially reduces jams in a shared machine that nobody owns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54 dB(A) at idle\u003c\/strong\u003e — quieter at rest than most machines of this capacity, so it can sit in an open-plan area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad rated material list:\u003c\/strong\u003e paper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, floppy disks and foil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime limited cutting-cylinder warranty against fracture\u003c\/strong\u003e under intimus North America's commercial shredder terms.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (ISO\/IEC 21964 \/ DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 \/ T-4 \/ F-1 \/ E-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e4 x 40 mm (160 mm² particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 43 sheets at 80 g\/m² (intimus North America: up to 50 per pass, up to 1,110 sheets\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e405 mm (16 in) feed opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e175 litres (46.25 US gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1,100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e120 V \/ 60 Hz single phase, 20 A dedicated circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e26 x 22.25 x 41.5 in (66 x 56 x 105 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e90 kg (198 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eUsers supported\u003c\/th\u003e\n\u003ctd\u003e10+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, floppy disks, foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eTwo years parts, 90 days labour; lifetime limited warranty on the cutting cylinders for fracture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eMachine on castors, 175-litre bin and power cord. \u003cstrong\u003eBin liners are not included\u003c\/strong\u003e, and intimus does not publish a bag part number for the 175 series on its North American site — size liners to the 46.25-gallon bin. The \u003cstrong\u003eautomatic oiler is optional on this SKU\u003c\/strong\u003e. If you want it fitted from the factory, order part 297134P1 (intimus 175 CP4 with oiler package) instead; on a machine shared by ten or more people, an automatic oiler is usually the better buy because manual lubrication is the maintenance task most likely to be skipped.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuy it if\u003c\/strong\u003e a whole floor or department needs one shredder and P-4 is the policy level. The combination of a 16 in throat, 43 sheets a pass and a 46-gallon bin is what stops a shared machine turning into a queue and a chore rota. It is also the right choice if you shred oversize sheets, folders or mixed media, because the rated material list here is the broadest in the 175 range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e your policy calls for P-5 or higher — the intimus 175 CP5 is the same chassis at 1.9 x 15 mm and 26 sheets a pass, and the 175 CP7 is the NSA-listed P-7 version at nine sheets. Do not buy it for a private office either: at 26 x 22.25 x 41.5 in and 198 lb this is a floor-standing unit, and the intimus 45 CP4 gives you the same P-4 security in a cabinet that fits under a desk. Finally, note the electrical requirement — 120 V on a dedicated 20 A circuit. Sharing a circuit with a copier is a common and avoidable installation mistake.\u003c\/p\u003e","brand":"intimus","offers":[{"title":"Default Title","offer_id":40692292386880,"sku":"297134","price":2990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/csm_int_175_CP4_2c7fe3287f_1b3b4e7c-ff53-48ad-9d4d-7985a958a731.webp?v=1754952293"},{"product_id":"297134p1","title":"intimus 175 CP4 4x40 mm, 120 V\/60 Hz w\/oiler package","description":"\u003cp\u003eThis is the intimus 175 CP4 supplied with the factory \u003cstrong\u003eautomatic oiler package\u003c\/strong\u003e. The shredder itself is identical to part 297134 — a 4 x 40 mm P-4 cross-cut machine with a 405 mm feed opening and a 175-litre bin — but the cutting cylinders are lubricated automatically instead of by hand. On a machine shared by ten or more people, that is not a convenience feature; it is the difference between a warranty that holds and one that does not.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic lubrication of the cutting cylinders.\u003c\/strong\u003e intimus North America's warranty document states plainly that cross-cut shredders require regular cylinder lubrication and that neglecting it may void the warranty. Manual oiling is the maintenance task most often skipped on a shared machine, because nobody owns it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame P-4 cut as the standard 175 CP4:\u003c\/strong\u003e 4 x 40 mm, a 160 mm² particle, right at the DIN 66399 P-4 limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 43 sheets a pass at 80 g\/m²\u003c\/strong\u003e, with intimus North America quoting up to 50 sheets a pass and up to 1,110 sheets per minute on lighter US stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e405 mm (16 in) feed opening\u003c\/strong\u003e — tabloid, ledger and unsquared file folders go in flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e175-litre (46.25 gallon) bin on castors\u003c\/strong\u003e, sized for a whole floor rather than a single desk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54 dB(A) at idle\u003c\/strong\u003e, quiet enough for an open-plan area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime limited cutting-cylinder warranty against fracture\u003c\/strong\u003e under intimus's commercial shredder terms — the terms the oiler helps you keep.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (ISO\/IEC 21964 \/ DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4 \/ O-3 \/ T-4 \/ F-1 \/ E-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e4 x 40 mm (160 mm² particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 43 sheets at 80 g\/m² (intimus North America: up to 50 per pass, up to 1,110 sheets\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e405 mm (16 in) feed opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e175 litres (46.25 US gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1,100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e120 V \/ 60 Hz single phase, 20 A dedicated circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e26 x 22.25 x 41.5 in (66 x 56 x 105 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e90 kg (198 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eAutomatic oiler package supplied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUsers supported\u003c\/th\u003e\n\u003ctd\u003e10+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, floppy disks, foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eTwo years parts, 90 days labour; lifetime limited warranty on the cutting cylinders for fracture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eMachine on castors, 175-litre bin, power cord and the automatic oiler package. \u003cstrong\u003eBin liners are not included\u003c\/strong\u003e and intimus does not publish a bag part number for the 175 series on its North American site, so size liners to the 46.25-gallon bin. Refill oil for the automatic system is a consumable and is ordered separately; intimus supplies cutting-block oil in 100 ml, 1 litre, 2 litre and 5 litre containers.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuy it if\u003c\/strong\u003e the machine will be shared and unowned. Departmental shredders fail for maintenance reasons far more often than mechanical ones, and the failure mode is always the same: nobody oiled it. If your facilities team is stretched, or the shredder sits on a floor with no designated caretaker, buy the oiler version and stop thinking about it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e you already have a maintenance routine that works, or the machine will sit with one records officer who will oil it at every bin change. In that case the standard \u003cstrong\u003eintimus 175 CP4 (part 297134)\u003c\/strong\u003e is the identical shredder for less money. Do not buy either version if you need P-5 or P-7 — the 175 CP5 and the NSA-listed 175 CP7 use the same chassis at finer cuts, and the 175 CP7 already includes a built-in automatic oiler as standard.\u003c\/p\u003e","brand":"intimus","offers":[{"title":"Default Title","offer_id":40692292419648,"sku":"297134P1","price":3407.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/csm_int_175_CP4_2c7fe3287f.webp?v=1754952295"},{"product_id":"297144","title":"intimus 297144 175CP5 5\/64\" X 19\/32\"","description":"\u003cp\u003eThe intimus 175 CP5 is the machine to specify when a whole department needs P-5 destruction rather than P-4. It uses the same chassis as the rest of the 175 range — 405 mm feed opening, 175-litre bin, 1,100 W drive — but cuts to 1.9 x 15 mm, a 28.5 mm² particle against the DIN 66399 P-5 ceiling of 30 mm². Sheet capacity drops to 26 a pass as a direct consequence.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 at departmental throughput.\u003c\/strong\u003e Twenty-six sheets a pass at 80 g\/m² is unusually high for a P-5 machine; the deskside intimus 45 CP5 manages twelve.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e405 mm (16 in) feed opening.\u003c\/strong\u003e Oversize sheets, unsquared folders and tabloid go in flat, which matters more at P-5 because folded paper reduces an already reduced pass capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.9 x 15 mm particle.\u003c\/strong\u003e P-5 is the level typically named for especially sensitive personal data, commercially confidential material and regulated records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e46.25-gallon (175 litre) bin\u003c\/strong\u003e on castors, so a floor sharing one P-5 machine is not emptying it daily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e54 dB(A) at idle\u003c\/strong\u003e, with i-Control smart switching and dynamic load sensing to guide feed rate.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRated for paper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, floppy disks and foil.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime limited cutting-cylinder warranty against fracture\u003c\/strong\u003e under intimus North America's commercial shredder terms — a benefit the NSA-listed P-7 model in this chassis does not carry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level (ISO\/IEC 21964 \/ DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5 \/ O-4 \/ T-5 \/ F-2 \/ E-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1.9 x 15 mm (28.5 mm² particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003eUp to 26 sheets at 80 g\/m² (intimus North America: up to 30 per pass, up to 605 sheets\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e405 mm (16 in) feed opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e175 litres (46.25 US gallons)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1,100 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e120 V \/ 60 Hz single phase, 20 A dedicated circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003e54 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e26 x 22.25 x 41.5 in (66 x 56 x 105 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e90 kg (198 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\u003cth\u003eUsers supported\u003c\/th\u003e\n\u003ctd\u003e10+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, floppy disks, foil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eTwo years parts, 90 days labour; lifetime limited warranty on the cutting cylinders for fracture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eMachine on castors, 175-litre bin and power cord. \u003cstrong\u003eBin liners are not included\u003c\/strong\u003e, and intimus does not publish a bag part number for the 175 series on its North American site — size liners to the 46.25-gallon bin. The automatic oiler is an option rather than standard equipment on this model; cutting-block oil is a separate consumable in either case and intimus's warranty terms make regular lubrication a condition of coverage.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBuy it if\u003c\/strong\u003e your written policy specifies P-5 and more than a handful of people have to comply with it. This is one of the few machines that makes P-5 practical at floor level: 26 sheets a pass through a 16 in throat means people will actually use it rather than stacking paper for someone else to deal with.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not buy it if\u003c\/strong\u003e P-4 satisfies your obligations. The intimus 175 CP4 in the same chassis takes 43 sheets a pass instead of 26 — roughly two-thirds more throughput for the same footprint and power. Equally, do not buy it expecting it to satisfy an NSA requirement: only the intimus 175 CP7 in this range is listed on the NSA\/CSS Evaluated Products List, and a P-5 rating establishes nothing about NSA compliance. For a single user needing P-5 at a desk, the intimus 45 CP5 is the smaller, cheaper answer.\u003c\/p\u003e","brand":"intimus","offers":[{"title":"Default Title","offer_id":40692292780096,"sku":"297144","price":3858.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/csm_175_CP5_a6b5707a53_4822856e-e015-447d-a6d7-e7922492d268.webp?v=1754952307"},{"product_id":"333301","title":"intimus OmniShred 85 Professional, Multifunctional Shredder with Smart Feeding Options","description":"\u003cp\u003eThe intimus OmniShred 85 is a commercial shredder with two feed points instead of one: a 305 mm front slot for paper, and a separate 250 x 130 mm top opening sized for bulky items that will not go through a conventional throat. That second opening is the whole point of the machine - it lets one unit deal with syringes, pill bottles, blister packs, fob keys, passports, cardboard and crumpled paper alongside ordinary documents.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual feed. Front slot takes up to 30 sheets at 80 g\/m2 or a single CD or plastic card; the top opening takes three to four bulky items at once.\u003c\/li\u003e\n\u003cli\u003eP-4 cross-cut at 3.6 x 43 mm (154.8 mm2), inside the DIN 66399 P-4 limit of 160 mm2.\u003c\/li\u003e\n\u003cli\u003eUnusually wide materials list for an office-format machine: paper with staples and clips, optical discs, plastic cards, crumpled paper, cardboard, foil, floppy disks, fob keys, passports, USB sticks and medical waste such as syringes, pill bottles and blister packages.\u003c\/li\u003e\n\u003cli\u003e1,100 W drive with the torque to deal with cardboard and moulded plastic rather than paper alone.\u003c\/li\u003e\n\u003cli\u003e68-litre (18 gal) collection bin.\u003c\/li\u003e\n\u003cli\u003e63 dB(A) at idle - louder than a desk-side shredder, which is what handling this range of material costs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (ISO\/IEC 21964 \/ DIN 66399)\u003c\/td\u003e\n\u003ctd\u003eP-4 (also O-3, T-4, F-1, E-3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e3.6 x 43 mm (154.8 mm2 per particle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003eUp to 30 sheets at 80 g\/m2 via the front slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThroat \/ intake width\u003c\/td\u003e\n\u003ctd\u003e305 mm (12 in) front slot; 250 x 130 mm top feed opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e68 litres (18 gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1,100 W nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003e63 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e66 x 55 x 81 cm (26 x 21.7 x 31.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e90 kg (198 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper with staples and paper clips, CD \/ DVD \/ Blu-ray, plastic cards, crumpled paper, cardboard, foil, floppy disks, fob keys, passports, USB sticks, medical material such as syringes, pill bottles and blister packages\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty (intimus North America)\u003c\/td\u003e\n\u003ctd\u003eCommercial shredder terms: 2 years parts, 90 days labour; lifetime limited warranty against fracture of the cutting cylinders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eThe machine arrives assembled with its 68-litre bin. Bags are not included. If you intend to shred medical or clinical material, specify liners appropriate to your waste stream rather than generic shredder bags, and check that your disposal contractor will accept the resulting mixed waste.\u003c\/p\u003e\n\n\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the OmniShred 85 if your destruction problem is variety rather than volume. Pharmacies and dispensaries destroying labelled pill bottles and blister packs, clinics dealing with patient-identifiable packaging, hotels and facilities teams killing key fobs and access cards, warehouses reducing branded cardboard, and border or HR functions destroying passports and ID documents all get more from this machine than from a higher-capacity paper-only shredder. Thirty sheets per pass is respectable for general office work as well.\u003c\/p\u003e\n\u003cp\u003eDo not buy it purely for paper throughput. If all you destroy is documents and you want volume, an industrial machine such as the intimus H200 CP4 takes 75 sheets and costs less per page destroyed. If you need P-5 or above, this is a P-4 machine and no configuration changes that - look at the intimus 60 CP5 or 60 CP7 for high-security paper work. And if 68 litres will have you emptying the bin several times a day, the OmniShred 115 is the same machine on a taller cabinet with a 115-litre removable cardboard container; that is the only meaningful difference between them.\u003c\/p\u003e","brand":"intimus","offers":[{"title":"Default Title","offer_id":40692980252736,"sku":"333301","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/csm_intimus_85_OmniShred_Product_Shot_1_e3da44b0aa.webp?v=1754952369"},{"product_id":"dsh0324","title":"MBM DSH0324 4001 cross-cut 3\/16\" x 1 1\/2\" (4 x 40 mm)","description":"\u003cp\u003eThe DSH0324 is the practical general-purpose build of the Destroyit 4001: P-4 cross-cut at 4 x 40 mm, 25 to 28 sheets per pass, through the widest throat in this range at 16 inches, into a 44-gallon bin. Compared with the P-5 version of the same cabinet it roughly doubles the sheet rate and adds CD and DVD capability, at the cost of one DIN security step. For a records function that handles mixed paper sizes and needs documented P-4 destruction without electrical work or oil consumables, this is the balanced choice in the 4000 series.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening\u003c\/strong\u003e — Tabloid, ledger and wide computer printout feed flat. No folding, no tearing, no lost capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 cross-cut\u003c\/strong\u003e — 4 x 40 mm particles measure 160 mm², the maximum DIN 66399 allows for P-4 — the level most commonly specified for personnel and financial records.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and DVD capable\u003c\/strong\u003e — MBM confirms the P-4 4001 for the most common optical discs, in addition to staples, paper clips and credit cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44-gallon shred bin\u003c\/strong\u003e — The largest bin in this group, emptied directly with no disposable bag required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRuns on a standard outlet\u003c\/strong\u003e — 115 V and up to 1 horsepower means no dedicated circuit and no electrician.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Capacity Control\u003c\/strong\u003e — Patented ECC indicator shows remaining capacity before you feed, which is how jams get prevented rather than cleared.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-energy sleep mode\u003c\/strong\u003e — Complete power cut-off after 30 minutes of inactivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reverse and bin-full cut-off\u003c\/strong\u003e — The cutters reverse automatically when overfed and the motor stops when the bin is full or the cabinet door is open, so a shared machine survives untrained users without needing jams cleared by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399)\u003c\/td\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e3\/16\" x 1-1\/2\" (4 x 40 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e25-28 sheets (70 gsm) — MBM rates capacity on 70 gsm paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed opening (throat width)\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShred bin volume\u003c\/td\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1 HP, single phase, rated for continuous operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (D x W x H)\u003c\/td\u003e\n\u003ctd\u003e21.5\" D x 25.25\" W x 37.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e174 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic oiler\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible shred bag\u003c\/td\u003e\n\u003ctd\u003eAC0901 (optional — the bin does not require bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime on cutting shafts and wheels; 3 years on other parts (excluding wearables); 90 days labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMBM does not publish a noise rating in decibels for this machine, so none is quoted here.\u003c\/p\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDestroyit 4001 P-4 cross-cut shredder in wooden cabinet on casters\u003c\/li\u003e\n\u003cli\u003eOperating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShred bags are \u003cstrong\u003enot\u003c\/strong\u003e included; the 44-gallon bin empties directly. AC0901 bags fit if bagged waste is required. The 4001 has \u003cstrong\u003eno automatic oiler\u003c\/strong\u003e, so there is no oil reservoir to fill.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if you want one machine that copes with whatever paper size arrives and meets a P-4 destruction standard. Facilities teams like it because it needs nothing more than a standard outlet and has no oil or bag consumables. Twenty-five to twenty-eight sheets per pass suits a department of fifteen to thirty people, and the optical media capability means discs do not need a separate solution.\u003c\/p\u003e\u003cp\u003eDo not buy this if your documents are all letter-size and your volume is high — the 3105 in the same P-4 cut takes 37 to 39 sheets and will clear a backlog considerably faster, though it needs a dedicated 20 amp line. Do not buy it if your policy specifies P-5 or micro-cut; the DSH0323 is the same cabinet at 2 x 15 mm. And if you need this throat width with more motor behind it, the 4003 is the 1.75 HP version of this chassis with an automatic oiler.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608022080,"sku":"DSH0324","price":3240.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/DESTROYIT-4001-A-right-web-M.webp?v=1754953733"},{"product_id":"dsh0323","title":"MBM DSH0323 4001 cross-cut 3\/32\" x 5\/8\" (2 x 15 mm)","description":"\u003cp\u003eWhat sets the DSH0323 apart from every other P-5 machine in the Destroyit range is the 16-inch feed opening. That is four inches wider than the 3104 and 3105 and nearly six wider than the 2604, and it is the reason to choose this model: tabloid, ledger, computer printout and folded plans all go in flat. It cuts 2 x 15 mm at DIN 66399 level P-5 into a 44-gallon bin, the largest here. Capacity is modest at 13 to 16 sheets — this is a wide-mouth machine on a 1 HP motor, not a high-volume one.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening\u003c\/strong\u003e — The widest throat in this Destroyit group. Wide-format and unfolded printouts feed flat instead of being torn or folded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 security\u003c\/strong\u003e — 2 x 15 mm particles equal 30 mm², at the DIN 66399 limit for P-5 — a step above standard office cross-cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44-gallon shred bin\u003c\/strong\u003e — The largest bin in this selection, matched to the wider throat so bulky sheets do not fill it prematurely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronically controlled safety shield\u003c\/strong\u003e — The SPS shield sits over the throat and the motor cuts power whenever the cabinet door is opened or the bin reaches full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Capacity Control\u003c\/strong\u003e — Patented ECC indicator gives a live reading of remaining sheet capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-energy sleep mode\u003c\/strong\u003e — Power supply is cut off after 30 minutes of inactivity rather than held in standby.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo oiler and no bags\u003c\/strong\u003e — MBM specifies no oiler for the 4001, and the bin empties directly, so there are no routine consumables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reverse on overfeed\u003c\/strong\u003e — If the cutters are given more than they can take, the machine reverses and returns the stack rather than stalling with paper trapped in the head. Combined with the ECC indicator, this keeps a shared machine running without an operator having to clear jams by hand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399)\u003c\/td\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e3\/32\" x 5\/8\" (2 x 15 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e13-16 sheets (70 gsm) — MBM rates capacity on 70 gsm paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed opening (throat width)\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShred bin volume\u003c\/td\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1 HP, single phase, rated for continuous operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (D x W x H)\u003c\/td\u003e\n\u003ctd\u003e21.5\" D x 25.25\" W x 37.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e174 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic oiler\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible shred bag\u003c\/td\u003e\n\u003ctd\u003eAC0901 (optional — the bin does not require bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime on cutting shafts and wheels; 3 years on other parts (excluding wearables); 90 days labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMBM does not publish a noise rating in decibels for this machine, so none is quoted here.\u003c\/p\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDestroyit 4001 P-5 cross-cut shredder in wooden cabinet on casters\u003c\/li\u003e\n\u003cli\u003eOperating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShred bags are \u003cstrong\u003enot\u003c\/strong\u003e included and are not required. If your waste contractor requires bagged shred, AC0901 bags fit the 4001. There is no oiler on this model, so no oil to order.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if your documents are physically large as well as sensitive: engineering drawings, ledger printouts, tabloid reports, wide spreadsheets. The 16-inch throat is the whole argument, and P-5 security means you are not compromising on the destruction standard to get it. A records room handling mixed paper sizes is the natural home.\u003c\/p\u003e\u003cp\u003eDo not buy this if you are shredding ordinary letter-size paper in volume. Thirteen to sixteen sheets from a 1 HP motor is modest, and the DSH0316L gives you the same P-5 cut for less money if a 12-inch throat is enough. If you want the wide throat with more speed, the 4003 in the same cabinet runs a 1.75 HP motor, adds an automatic oiler and lifts the P-5 rating to 16 to 18 sheets. This configuration also does not take CDs or DVDs — only the P-4 4001 is cleared for optical media.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608054848,"sku":"DSH0323","price":3149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/DESTROYIT-4001-A-right-web-M_832b07c9-0343-4507-903f-f3124a542a3b.webp?v=1754953735"},{"product_id":"dsh0396o","title":"MBM DSH0396O 4003 cross-cut 3\/16\" x 1 1\/2\" (4 x 40 mm)","description":"\u003cp\u003eThe Destroyit 4003 cross-cut is the variant of MBM's 4003 most general offices end up buying. It cuts to 4 x 40 mm - 160 mm², which sits exactly on the DIN 66399 P-4 boundary - and it is one of only two 4003 builds MBM clears for optical media. That combination is what separates it from its siblings: the strip-cut 4003 is faster but only P-2, the 2 x 15 mm version is more secure but drops to 16-18 sheets, and the super micro-cut version halves throughput again and is paper-only.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eP-4 cross cut at 4 x 40 mm, the level most organisations specify for personal data and internal commercial documents.\u003c\/li\u003e\n\u003cli\u003eAutomatic oil injection lubricates the cutting shafts on cross-cut models, which is the single biggest factor in cross-cut shaft life.\u003c\/li\u003e\n\u003cli\u003eECC+ Electronic Capacity Control shows how much of the sheet capacity is being used while you feed, so operators learn where the limit is instead of jamming into it.\u003c\/li\u003e\n\u003cli\u003eEASY-SWITCH control element reports machine status through colour codes and back-lit symbols rather than an error beep.\u003c\/li\u003e\n\u003cli\u003eSPS safety package with an electronically controlled transparent flap across the 16-inch feed opening.\u003c\/li\u003e\n\u003cli\u003eZERO ENERGY standby: after 15 minutes idle the machine disconnects from the supply completely and draws 0 Wh.\u003c\/li\u003e\n\u003cli\u003eAutomatic reverse and power cut-off on overfeed, automatic stop when the bin is full, and a magnetic proximity switch that kills the drive if the cabinet door is opened.\u003c\/li\u003e\n\u003cli\u003eMobile on castors; the 44-gallon bin runs lined or unlined.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 1-1\/2\" (4 x 40 mm), 160 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e34-36 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e1.75 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e73.6 dB LWA guaranteed sound power, no load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e21.5\" x 25.25\" x 37.25\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e179 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, most common CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eCutting shafts warranted for life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe machine ships assembled on castors with its shred bin, the printed operating manual and the power cord. The bin is designed to be used with or without a liner, so \u003cstrong\u003edisposable bags are not included\u003c\/strong\u003e - order MBM part \u003cstrong\u003e#9000 410\u003c\/strong\u003e (box of 50) if you want to bag the waste. Shredder oil is also sold separately.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it if you are equipping a shared office area or a department that shreds continuously for 20-30 minutes at a time and needs a defensible P-4 rating. The 44-gallon bin and 16-inch throat mean it will take continuous-form printouts and folded tabloid sheets, and it will destroy the occasional expired access card or backup disc without a second machine.\u003c\/p\u003e\u003cp\u003eDo not buy it if your retention policy or your client contracts specify P-5 or higher - a 4 x 40 mm particle is legible under reconstruction effort that P-5 defeats, and you want the DSH0502L (4005, 2 x 15 mm) or the DSH0397O super micro-cut 4003 instead. Do not buy it if you shred more than roughly 400 sheets an hour, day in day out; at that duty the 4005 chassis (DSH0501L) gives the same P-4 cut with a 2.12 hp motor and 37-39 sheet capacity, and the conveyor-fed 4108 is the real answer above that. And if a single desk is all you are covering, this is a 179 lb floor machine on castors, not a deskside unit.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608087616,"sku":"DSH0396O","price":3769.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/DESTROYIT-4003-A-right-Auto-Oiler-M_db39ed57-22ec-4730-afc3-17b9f4599697.webp?v=1754953739"},{"product_id":"dsh0395o","title":"MBM DSH0395O 4003 cross-cut 3\/32\" x 5\/8\" (2 x 15 mm)","description":"\u003cp\u003eThe DSH0395O is the P-5 configuration of the Destroyit 4003, and the reason to pick it over the otherwise similar 4001 is lubrication. MBM fits an automatic oiler to the cross-cut 4003 and none at all to the 4001, which on a 2 x 15 mm cutting head is a meaningful difference — fine cross-cut shafts lose capacity and jam when they run dry, and automatic oiling removes that from the operator’s list. Add a 1.75 HP motor against the 4001’s 1 HP, and the sheet rating rises from 13 to 16 up to 16 to 18. Throat width, bin volume and cabinet are unchanged: 16 inches, 44 gallons, standard 115 V outlet.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic oil injection\u003c\/strong\u003e — MBM equips the cross-cut and super micro-cut 4003 with an automatic oiler, so the shafts stay lubricated without an operator remembering to do it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 security\u003c\/strong\u003e — 2 x 15 mm particles equal 30 mm², at the DIN 66399 ceiling for P-5 — above the P-4 that satisfies most routine office policy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening\u003c\/strong\u003e — Tabloid, ledger and wide printout feed flat, which is unusual at this security level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.75 HP continuous-duty motor\u003c\/strong\u003e — Nearly double the 4001’s motor, which is where the extra sheets per pass come from.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44-gallon shred bin\u003c\/strong\u003e — Emptied directly with no disposable bag required; AC0901 bags fit if your process needs them.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronic Capacity Control and SPS shield\u003c\/strong\u003e — Live capacity indication, electronically controlled safety shield, automatic reverse on overfeed and cut-off on bin-full or door-open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting shaft warranty\u003c\/strong\u003e — Cross-cut shafts are warranted for the life of the machine — the one-year term applies only to super micro-cut heads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399)\u003c\/td\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eCross Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e3\/32\" x 5\/8\" (2 x 15 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e16-18 sheets (70 gsm) — MBM rates capacity on 70 gsm paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed opening (throat width)\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShred bin volume\u003c\/td\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1.75 HP, single phase, rated for continuous operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (D x W x H)\u003c\/td\u003e\n\u003ctd\u003e21.5\" D x 25.25\" W x 37.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e179 lb (shipping)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic oiler\u003c\/td\u003e\n\u003ctd\u003eAutomatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible shred bag\u003c\/td\u003e\n\u003ctd\u003eAC0901 (optional — the bin does not require bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime on cutting shafts and wheels; 3 years on other parts (excluding wearables); 90 days labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMBM does not publish a noise rating in decibels for this machine, so none is quoted here.\u003c\/p\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDestroyit 4003 P-5 cross-cut shredder in wooden cabinet on casters\u003c\/li\u003e\n\u003cli\u003eOperating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShredder oil for the automatic oiler is \u003cstrong\u003enot\u003c\/strong\u003e included and must be ordered separately. Shred bags are also not included; the bin empties directly, and AC0901 bags fit.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if you need P-5 destruction, handle mixed or wide paper sizes, and want the machine to look after its own lubrication. Records departments, legal support functions and clinical administration teams shredding steadily through the day are the right buyers. It runs from a standard outlet, so there is no electrical work to schedule.\u003c\/p\u003e\u003cp\u003eDo not buy this if 16 to 18 sheets is short of what you need. If the volume is genuinely heavy and P-5 is required, the 3105 in 2 x 15 mm takes 24 to 26 sheets on a 2.125 HP motor — but it has a 12-inch throat and needs a dedicated 20 amp line, so it is a different installation. Do not buy this one for optical media either: MBM clears only the P-2 and P-4 4003 builds for CDs and DVDs. And if P-4 satisfies your policy, the P-4 4003 doubles the throughput to 34 to 36 sheets for less money.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608120384,"sku":"DSH0395O","price":3769.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/DESTROYIT-4003-A-right-Auto-Oiler-M_cc0c818c-4893-4077-9cc0-b1ab55b8a814.webp?v=1754953741"},{"product_id":"dsh0394","title":"MBM DSH0394 4003 strip-cut 1\/4\" (6 mm)","description":"\u003cp\u003eNothing else in this Destroyit group moves paper as fast as the DSH0394. It is the 4003 in 6 mm strip-cut, rated at 43 to 45 sheets per pass, driven by a 1.75 HP motor through a 16-inch feed opening into a 44-gallon bin. That combination is built for bulk: file room clearances, decommissioned archives, print overruns, end-of-retention purges. The security level is P-2, the second-lowest in DIN 66399, and that is the deliberate trade. Buy it for volume of non-sensitive paper; do not buy it for confidential records.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e43 to 45 sheets per pass\u003c\/strong\u003e — The highest rated capacity of any machine in this selection, measured on 70 gsm paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.75 HP continuous-duty motor\u003c\/strong\u003e — Sized for sustained bulk work, not intermittent departmental shredding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-inch feed opening\u003c\/strong\u003e — Accepts tabloid, ledger and continuous printout flat — which matters when the point is speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and DVD capable\u003c\/strong\u003e — MBM confirms the P-2 and P-4 4003 models for the most common optical discs, alongside staples, paper clips and credit cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e44-gallon shred bin\u003c\/strong\u003e — Necessary at this throughput, though strip-cut waste is bulky and will still need frequent emptying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo oiler on the strip-cut build\u003c\/strong\u003e — MBM fits automatic oilers to the cross-cut and super micro-cut 4003 only. Strip-cut shafts do not require it, which removes a consumable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting shaft warranty\u003c\/strong\u003e — Hardened steel shafts milled at MBM’s Balingen factory, warranted for the life of the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic reverse, ECC and safety shield\u003c\/strong\u003e — The patented Electronic Capacity Control indicator reads remaining capacity before you commit a stack, the cutters reverse automatically when overfed, and the electronically controlled safety shield plus bin-full cut-off keep the machine safe in shared use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399)\u003c\/td\u003e\n\u003ctd\u003eP-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eStrip Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e1\/4\" (6 mm) strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e43-45 sheets (70 gsm) — MBM rates capacity on 70 gsm paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed opening (throat width)\u003c\/td\u003e\n\u003ctd\u003e16 inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShred bin volume\u003c\/td\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor\u003c\/td\u003e\n\u003ctd\u003e1.75 HP, single phase, rated for continuous operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e115 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (D x W x H)\u003c\/td\u003e\n\u003ctd\u003e21.5\" D x 25.25\" W x 37.25\" H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e166 lb (shipping)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAutomatic oiler\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible shred bag\u003c\/td\u003e\n\u003ctd\u003eAC0901 (optional — the bin does not require bags)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime on cutting shafts and wheels; 3 years on other parts (excluding wearables); 90 days labor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eMBM does not publish a noise rating in decibels for this machine, so none is quoted here.\u003c\/p\u003e\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDestroyit 4003 strip-cut shredder in wooden cabinet on casters\u003c\/li\u003e\n\u003cli\u003eOperating manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eShred bags are \u003cstrong\u003enot\u003c\/strong\u003e included and are not required — the bin empties directly. AC0901 bags fit the 4003 if bagged waste is part of your disposal process. No oil is needed on the strip-cut model.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if the job is volume disposal of paper that is not personally identifiable or contractually confidential: superseded print jobs, internal drafts, expired catalogues, general clear-outs. At 43 to 45 sheets through a 16-inch throat, it will clear boxes of paper in the time a P-5 machine takes to do one file.\u003c\/p\u003e\u003cp\u003eDo not buy this for records containing personal, medical or financial data. A 6 mm strip runs the full length of the page and text stays readable along it; DIN 66399 rates P-2 for internal material only. For anything covered by a privacy obligation, move to the 4 x 40 mm P-4 4003 (34 to 36 sheets), the 2 x 15 mm P-5 version (16 to 18 sheets), or the super micro-cut P-7 build. All share this cabinet, throat and bin, so the only thing that changes is the cutting head and the throughput.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608153152,"sku":"DSH0394","price":3240.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/DESTROYIT-4003-A-right-Auto-Oiler-M_22862670-4970-4d78-a7a3-6a9eace15838.webp?v=1754953743"},{"product_id":"dsh0501l","title":"MBM DSH0501L 4005 cross-cut 3\/16\" x 1 1\/2\" (4 x 40 mm)","description":"\u003cp\u003eIf you want one machine to cover an entire floor and the requirement is P-4, this is the sensible choice in MBM's office range. The 4005 cross-cut delivers a 4 x 40 mm particle - 160 mm², right on the P-4 limit - while still taking 37 to 39 sheets a pass, which is more than the 4003 manages at the same security level and enough to keep a queue moving. The 4005 is a floor-standing machine on castors, not a deskside unit: it stands nearly 40 inches tall, ships at 378 lb and needs its own 20 amp circuit, so treat it as a shared departmental asset that gets sited once and stays there.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e4 x 40 mm cross cut at DIN 66399 P-4, the level most privacy policies and client contracts settle on.\u003c\/li\u003e\n\u003cli\u003e37-39 sheets per pass at 70 gsm - the highest P-4 capacity in the 115 V Destroyit office line.\u003c\/li\u003e\n\u003cli\u003e2.12 hp motor, run on a dedicated 115 V, 20 amp circuit.\u003c\/li\u003e\n\u003cli\u003e16-inch feed opening for continuous forms, letter, legal and folded large formats.\u003c\/li\u003e\n\u003cli\u003ePhotocell automatic start and stop, so the operator never touches a switch during a run.\u003c\/li\u003e\n\u003cli\u003eAutomatic reverse on overload and a safety flap across the throat.\u003c\/li\u003e\n\u003cli\u003eMagnetic door protection cuts the drive when the cabinet is opened; thermal motor overload protection.\u003c\/li\u003e\n\u003cli\u003e44-gallon pull-out shred bin, machine mobile on castors.\u003c\/li\u003e\n\u003cli\u003eHardened steel cutting shafts, warranted for life.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 1-1\/2\" (4 x 40 mm), 160 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e37-39 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e2.12 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V, dedicated 20 amp line required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e23.25\" x 25.25\" x 39.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e378 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, most common CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eCutting shafts warranted for life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled on castors with the pull-out shred bin, operating manual and power cord. \u003cstrong\u003eDisposable bags are not included\u003c\/strong\u003e; the bin can be run bare or lined. Confirm the current liner part number for the 4005 bin with your dealer before ordering, as MBM does not print it on the model spec sheet.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the default departmental shredder. A 30 to 60 person floor, a busy back office, a records room that receives steady rather than seasonal volume - the 4005 cross-cut is sized for that and has the motor to sustain it. Compared with the DSH0396O (4003, same P-4 cut) you gain about three sheets a pass and a substantially heavier drive train; compared with the DSH0500L strip-cut you lose about thirteen sheets a pass and gain two full DIN security levels, which is almost always the right trade.\u003c\/p\u003e\u003cp\u003eDo not buy it if a contract or classification specifies P-5 or P-7. P-4 permits 160 mm² particles, and no amount of good practice changes the rating - go to the DSH0502L (2 x 15 mm, P-5) or the DSH0503L (0.8 x 5 mm, P-7), accepting the capacity drop to 24-26 and 10-12 sheets respectively. Do not buy it for continuous archive destruction either; clearing pallets of boxes is work for the conveyor-fed 4108 or the 4606, both three-phase machines. And if the machine will only ever serve two or three people, this is more shredder than you need.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608218688,"sku":"DSH0501L","price":6614.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/4005HR-M_a8099397-411b-4de0-8f63-fcae761cf409.webp?v=1754953748"},{"product_id":"dsh0502l","title":"MBM DSH0502L 4005 cross-cut 3\/32\" x 5\/8\" (2 x 15 mm)","description":"\u003cp\u003eThis is the 4005 built for organisations whose policy names P-5 rather than P-4. The 2 x 15 mm cross cut produces a 30 mm² particle, which is exactly the DIN 66399 P-5 limit, and that precision is the point: it is the smallest particle you can get out of this chassis without dropping to the super micro-cut head and its shorter warranty. The cost is throughput - 24 to 26 sheets a pass against 37-39 for the P-4 version - and a narrower list of things you can safely feed it. Everything else is identical to the rest of the 4005 range: the same 2.12 hp drive, the same 16-inch throat, the same 44-gallon bin and the same photocell-controlled operation.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e2 x 15 mm cross cut, 30 mm² - DIN 66399 P-5, the level specified for data whose disclosure would threaten an organisation's existence.\u003c\/li\u003e\n\u003cli\u003e24-26 sheets at 70 gsm, a workable rate for a department that shreds steadily rather than in bulk.\u003c\/li\u003e\n\u003cli\u003eKeeps the full lifetime cutting shaft warranty, unlike the super micro-cut build of the same machine.\u003c\/li\u003e\n\u003cli\u003e2.12 hp motor on a dedicated 115 V, 20 amp circuit.\u003c\/li\u003e\n\u003cli\u003e16-inch feed opening; letter and legal go in long edge first.\u003c\/li\u003e\n\u003cli\u003ePhotocell automatic start and stop with automatic reverse on overfeed.\u003c\/li\u003e\n\u003cli\u003eSafety flap across the throat, magnetic door protection, thermal motor overload protection.\u003c\/li\u003e\n\u003cli\u003e44-gallon pull-out bin on castors.\u003c\/li\u003e\n\u003cli\u003eMachine mobile on castors but genuinely heavy at 378 lb - site it once, on a route that can take it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/32\" x 5\/8\" (2 x 15 mm), 30 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e24-26 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e2.12 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V, dedicated 20 amp line required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e23.25\" x 25.25\" x 39.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e378 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eCutting shafts warranted for life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled on castors with the pull-out shred bin, operating manual and power cord. \u003cstrong\u003eDisposable bags are not included\u003c\/strong\u003e; the bin can be run bare or lined. Confirm the current liner part number for the 4005 bin with your dealer before ordering, as MBM does not print it on the model spec sheet.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it when P-5 appears in writing somewhere - a government supplier agreement, a defence or pharmaceutical contract, an internal classification for board papers, commercially sensitive R\u0026amp;D or M\u0026amp;A material. It is also the right pick when you want materially better security than P-4 but cannot justify the productivity hit at P-7, and when you would rather keep the lifetime shaft warranty than trade it away for a smaller particle. accept the 10-12 sheet rate and one-year shaft warranty of the super micro-cut DSH0503L.\u003c\/p\u003e\u003cp\u003eDo not buy it as a general office machine. Dropping from 37-39 sheets to 24-26 for security you do not need is a real productivity cost, and the DSH0501L at P-4 is the better default. Do not buy it if you need to destroy optical media or cards: MBM clears only its P-2 and P-4 machines for the most common CDs and DVDs, so this variant should be treated as a paper-and-fasteners machine. And if the requirement is genuinely P-7 - a specific classification, or NSA-grade particle size - this machine does not reach it and the DSH0503L does.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608251456,"sku":"DSH0502L","price":6614.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/4005HR-M_61d7c04c-ba2a-436f-bf7e-c134743c6b3f.webp?v=1754953750"},{"product_id":"dsh0500l","title":"MBM DSH0500L 4005 strip-cut 1\/4\" (6 mm)","description":"\u003cp\u003eThe Destroyit 4005 strip-cut is the fastest machine in MBM's office range and the least secure. It cuts 6 mm strips at DIN 66399 P-2 and swallows 50 to 52 sheets in a pass - roughly double what the P-5 version of the same chassis manages. Buy it when the job is bulk paper reduction with a modest confidentiality requirement, and be honest with yourself that P-2 is not a data-protection grade. Mechanically it is the same 4005 as the cross-cut versions - the same 2.12 hp drive, the same 16-inch throat, the same 44-gallon bin - fitted with the most tolerant cutting head MBM builds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e50-52 sheets per pass at 70 gsm, the highest single-pass capacity of any 115 V machine in the Destroyit office line.\u003c\/li\u003e\n\u003cli\u003e6 mm strip cut, DIN 66399 P-2 - suitable for general internal paper, not for personal data.\u003c\/li\u003e\n\u003cli\u003e2.12 hp motor on a dedicated 115 V, 20 amp circuit - check this before you site the machine, as a shared 15 amp office circuit will not do.\u003c\/li\u003e\n\u003cli\u003e16-inch feed opening takes continuous forms, letter and legal long edge first.\u003c\/li\u003e\n\u003cli\u003ePhotocell automatic start and stop; automatic reverse if the throat is overloaded.\u003c\/li\u003e\n\u003cli\u003eSafety flap across the feed opening and a door interlock that cuts the drive when the cabinet is opened.\u003c\/li\u003e\n\u003cli\u003eThermal overload protection on the motor.\u003c\/li\u003e\n\u003cli\u003e44-gallon pull-out shred bin, machine mobile on castors.\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on the hardened steel cutting shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/4\" (6 mm) strip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e50-52 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e44 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e2.12 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e115 V, dedicated 20 amp line required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e23.25\" x 25.25\" x 39.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e343 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips; small quantities of credit cards and optical media\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eCutting shafts warranted for life\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled on castors with the pull-out shred bin, operating manual and power cord. \u003cstrong\u003eDisposable bags are not included\u003c\/strong\u003e; the bin can be run bare or lined. Confirm the current liner part number for the 4005 bin with your dealer before ordering, as MBM does not print it on the model spec sheet.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it for volume: print rooms clearing misprints, warehouses destroying picking lists, schools and clubs emptying filing cabinets of non-sensitive administrative paper, or any operation where the point is to reduce paper for recycling and confidentiality is a secondary concern. At 50-plus sheets a pass it will clear a banker's box far faster than any cross-cut in this price class, and the strip-cut shafts are the most tolerant in the range.\u003c\/p\u003e\u003cp\u003eDo not buy it if you handle personal data. DIN P-2 permits particles up to 800 mm², and a 6 mm strip leaves whole lines of text intact and reconstructable. Most privacy programmes and most client contracts land on P-4 as the floor; for that, take the DSH0501L, which is the same chassis with a 4 x 40 mm cross cut and still manages 37-39 sheets. If your requirement is P-5, the DSH0502L is the one to look at. And if you need this throughput on a continuous basis rather than in bursts, the conveyor-fed 4108 strip-cut (DSH0345) does 75-95 sheets on three-phase power.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608284224,"sku":"DSH0500L","price":5886.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/4005HR-M_f77d54d9-9b3b-41d0-a7ef-a3187c1dee8a.webp?v=1754953753"},{"product_id":"dsh0329","title":"MBM DSH0329 5009 cross-cut 11\/32\" x 11\/2\"-3\" (8 x 40-80 mm)","description":"\u003cp\u003eThe Destroyit 5009 in its 8 x 40-80 mm configuration is a destruction plant rather than a shredder: 600 to 700 sheets in a single pass, a 20-inch throat, 24 horsepower and 3,080 lb on the pallet. This is the highest-capacity machine MBM builds, and this variant is the fastest version of it. Its DIN 66399 rating is P-2, which is the trade you are making for that speed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cp\u003eThe 5009 is the largest machine in the Destroyit line and is not an office product. It runs on 220 volt three-phase power with a dedicated 50 amp line, draws up to 24 horsepower, and ships at 3,080 lb. MBM rates it for hardbound documents, three-ring binders, CDs and DVDs in addition to flat and crumpled paper and cardboard.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e600-700 sheets per pass at 70 gsm - an order of magnitude beyond any office shredder.\u003c\/li\u003e\n\u003cli\u003e8 x 40-80 mm cross cut, DIN 66399 P-2.\u003c\/li\u003e\n\u003cli\u003e20-inch feed opening, wide enough for unopened files and bulky mixed waste.\u003c\/li\u003e\n\u003cli\u003eRated by MBM for hardbound documents, three-ring binders, CDs and DVDs as well as flat and crumpled paper and cardboard including staples.\u003c\/li\u003e\n\u003cli\u003e24 hp maximum on a 220 V three-phase supply with a dedicated 50 amp line.\u003c\/li\u003e\n\u003cli\u003eEmergency stop, door and grid safety switches that halt the machine, and overload protection with automatic reverse.\u003c\/li\u003e\n\u003cli\u003eTemperature indicator with thermal shutdown to protect the drive on long runs.\u003c\/li\u003e\n\u003cli\u003e79-gallon shred volume using 350-litre plastic bags (MBM accessory 9000 414).\u003c\/li\u003e\n\u003cli\u003eOptional module conveyor belt system (accessory 9000 595) for fully fed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e.35\" x 1.5\"-3\" (8 x 40-80 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e600-700 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e79 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e24 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220 V, 3 phase, dedicated 50 amp line required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e74 dB(A) per EN 13023; 76 dB(A) with the conveyor belt in front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e85.5\" x 40.7\" x 67.5\" - depth extends to 121\" with the optional conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e3,080 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper (flat or crumpled), cardboard including staples, hardbound documents, three-ring binders, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe 5009 is delivered as a machine on a pallet and commissioned on site. \u003cstrong\u003eBags are not included\u003c\/strong\u003e - it uses 350-litre plastic bags, MBM accessory number \u003cstrong\u003e9000 414\u003c\/strong\u003e. The module conveyor belt system is a separate accessory, number \u003cstrong\u003e9000 595\u003c\/strong\u003e, and adds substantially to the depth required. Installation needs a 220 V three-phase supply on a dedicated 50 amp line.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it if you destroy paper by the pallet: a commercial shredding service, a records centre closing out retention periods, a large financial or government facility running scheduled destruction days. The reason to choose this configuration over the P-3 DSH0331 is throughput - 600-700 sheets against 300-400 - and the reason it can achieve that is the coarser 8 x 40-80 mm cut. If your material is bulk administrative paper, superseded manuals, hardbound reference sets and binders, this is the correct machine.\u003c\/p\u003e\u003cp\u003eDo not buy it for personal data or client-confidential records. P-2 is a bulk-reduction rating, not a privacy rating, and no operational care compensates for the particle size. The DSH0331 is the identical machine cutting 6 x 50 mm at P-3 and is the right specification for anything with names on it. Do not buy either 5009 without a facilities assessment: you need three-phase power on a dedicated 50 amp circuit, a bay over seven feet deep before the optional conveyor, floor loading for 3,080 lb, and a plan for removing several hundred kilograms of shredded waste a day. Below that scale, the 4108 or 4606 is a far more sensible purchase.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608480832,"sku":"DSH0329","price":48265.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/5009HR-M.webp?v=1754953770"},{"product_id":"dsh0331","title":"MBM DSH0331 5009 cross-cut 1\/4\" x 2\" (6 x 50 mm)","description":"\u003cp\u003eThis is the 5009 specified for material that has to be destroyed securely rather than merely reduced. The 6 x 50 mm cross cut yields a 300 mm² particle inside the DIN 66399 P-3 limit, and the machine still takes 300 to 400 sheets a pass. You give up roughly half the throughput of the 8 x 40-80 mm DSH0329 to gain that security level - on an industrial machine, that is usually the right decision.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cp\u003eThe 5009 is the largest machine in the Destroyit line and is not an office product. It runs on 220 volt three-phase power with a dedicated 50 amp line, draws up to 24 horsepower, and ships at 3,080 lb. MBM rates it for hardbound documents, three-ring binders, CDs and DVDs in addition to flat and crumpled paper and cardboard.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 x 50 mm cross cut, 300 mm², DIN 66399 P-3.\u003c\/li\u003e\n\u003cli\u003e300-400 sheets per pass at 70 gsm - roughly five times what the conveyor-fed 4108 manages at the same security level.\u003c\/li\u003e\n\u003cli\u003e20-inch feed opening for bulky, unsorted confidential waste.\u003c\/li\u003e\n\u003cli\u003eMBM rates the 5009 for hardbound documents, three-ring binders, CDs and DVDs alongside flat and crumpled paper and cardboard including staples.\u003c\/li\u003e\n\u003cli\u003e24 hp maximum on 220 V three phase with a dedicated 50 amp line.\u003c\/li\u003e\n\u003cli\u003eEmergency stop, door and grid switches that halt the drive, and overload protection with automatic reverse.\u003c\/li\u003e\n\u003cli\u003eTemperature indicator with thermal shutdown for sustained production runs.\u003c\/li\u003e\n\u003cli\u003e79-gallon shred volume using 350-litre bags (MBM accessory 9000 414).\u003c\/li\u003e\n\u003cli\u003eOptional module conveyor belt system (accessory 9000 595).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSecurity level\u003c\/th\u003e\n\u003ctd\u003eDIN 66399 P-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/4\" x 2\" (6 x 50 mm), 300 mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e300-400 sheets at 70 gsm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e20\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShred volume\u003c\/th\u003e\n\u003ctd\u003e79 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e24 hp maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220 V, 3 phase, dedicated 50 amp line required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise\u003c\/th\u003e\n\u003ctd\u003e74 dB(A) per EN 13023; 76 dB(A) with the conveyor belt in front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (D x W x H)\u003c\/th\u003e\n\u003ctd\u003e85.5\" x 40.7\" x 67.5\" - depth extends to 121\" with the optional conveyor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShipping weight\u003c\/th\u003e\n\u003ctd\u003e3,080 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper (flat or crumpled), cardboard including staples, hardbound documents, three-ring binders, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMBM quotes sheet capacity at 70 gsm paper on its published spec sheet and prints an explicit caveat alongside it: \"realistic throughputs can be as low as half that of the theoretical capacities quoted.\" US 20 lb bond is roughly 75 gsm and slightly heavier, so plan around the lower end of the range, not the headline number.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDelivered on a pallet and commissioned on site. \u003cstrong\u003eBags are not included\u003c\/strong\u003e; the machine takes 350-litre plastic bags, MBM accessory \u003cstrong\u003e9000 414\u003c\/strong\u003e. The module conveyor belt system is optional, accessory \u003cstrong\u003e9000 595\u003c\/strong\u003e. A 220 V three-phase supply on a dedicated 50 amp line must be in place before installation.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it for high-volume secure destruction: commercial shredding operators serving regulated clients, government and defence records centres, large hospital or bank archive programmes. It is the configuration to choose when the material contains customer or patient information and P-3 is what your contract or policy specifies. At 300-400 sheets a pass it will clear archive boxes at a rate no office-class machine approaches, and it takes binders and hardbound volumes without pre-processing.\u003c\/p\u003e\u003cp\u003eDo not buy it if your obligations name P-4 or higher. P-3 allows particles up to 320 mm², and there is no P-4 or P-5 version of the 5009 - reaching those levels means dropping to a 4606 at P-5 and 32-37 sheets, which is a very different operation. Do not buy it if bulk reduction rather than security is the goal; the DSH0329 does 600-700 sheets on the same chassis at P-2 for less money per sheet destroyed. And do not order either 5009 before a site survey covering three-phase power, a bay over seven feet deep, floor loading for 3,080 lb and the logistics of moving the waste out.\u003c\/p\u003e","brand":"MBM","offers":[{"title":"Default Title","offer_id":40693608513600,"sku":"DSH0331","price":53349.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/5009HR-M_03d55c79-f800-4723-b0eb-a62bccea1e96.webp?v=1754953773"},{"product_id":"4620001","title":"Microshred 225Mi 100% Jam Proof Micro-Cut Shredder","description":"\u003cp\u003eThe Microshred 225Mi is Fellowes' commercial micro-cut machine and the one to specify when a policy names P-5. It cuts at 5\/64 by 15\/32 inches — 2 by 12 mm, about 24 mm² per particle — comfortably inside the 30 mm² DIN 66399 sets for the class.\u003c\/p\u003e\n\u003cp\u003eIt is also a continuous-duty machine rather than a cycled one, which is unusual at this security level. Sixteen sheets a pass through a 9.5-inch throat into a 16-gallon bin, with a published daily maximum of 4,400 sheets, 200 cards and 10 CDs. That last figure is more useful than any run-time rating: it tells you what Fellowes expects the machine to absorb in a working day.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenuine DIN 66399 P-5\u003c\/strong\u003e at 5\/64 x 15\/32 in (2 x 12 mm, about 24 mm²) — a fifth the particle area of a P-4 cross-cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous duty.\u003c\/strong\u003e Fellowes publishes a maximum daily usage of 4,400 sheets, 200 cards and 10 CDs rather than an on\/off cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSixteen sheets per pass\u003c\/strong\u003e on 20 lb paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5-inch (240 mm) paper entry\u003c\/strong\u003e, wider than the small-office Powershred models.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, plastic credit cards, CDs and DVDs, staples, small paper clips and junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e with SafeSense contact protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilentShred acoustic design\u003c\/strong\u003e for shared workspaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gallon bin\u003c\/strong\u003e, 89 lb, at 120 V, 60 Hz, 8 A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe daily usage figure is worth reading as a specification rather than a footnote. Four thousand four hundred sheets is roughly nine reams — a serious departmental workload. Two hundred cards and ten CDs, on the other hand, are strict limits: hard media wears a micro-cut head far faster than paper, and a machine used mainly for discs will not last. If your destruction load is heavily weighted towards cards and media rather than paper, a dedicated media shredder is a better investment than pushing this one to its limits.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eMicro-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/64 x 15\/32 in (2 x 12 mm, about 24 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e16 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePaper entry width\u003c\/th\u003e\n\u003ctd\u003e9.5 in (240 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous; maximum daily usage 4,400 sheets, 200 cards, 10 CDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 8 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e89 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, CDs\/DVDs, staples, small paper clips, junk mail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. We have not published cabinet dimensions for this model: the figures in our supplier data are demonstrably corrupted — four different Powershred commercial models were listed at 17.13, 17.14, 17.15 and 17.16 inches deep — and we could not verify a clean set against Fellowes' own documentation. Ask us and we will measure one. Fellowes publishes no decibel value for this model.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder with 16-gallon pull-out bin and power cord. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, and asks that the machine be oiled each time the waste bin is emptied. Aerosol lubricants must not be used in any shredder. Fellowes' manual for this model asks that the oiling procedure be repeated twice, which is worth noting: a micro-cut head needs more lubricant than a cross-cut one.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 225Mi when P-5 is a written requirement and the volume is departmental. Continuous duty, a 16-gallon bin and a 4,400-sheet daily rating make it a machine that a records team or a compliance function can rely on, and unlike many micro-cut shredders it also takes cards, discs and staples.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if P-4 would satisfy your policy. The \u003cstrong\u003ePowershred 225Ci\u003c\/strong\u003e is the equivalent machine at P-4, takes 22 sheets a pass instead of 16 and costs less — micro-cut is a real security gain but it is paid for in throughput. Do not buy it for a single desk; at 89 lb and 8 A it is a commercial fixture. And if you need P-6 or P-7, the \u003cstrong\u003eFortishred HS-440\u003c\/strong\u003e is the only Fellowes machine in that territory, at four sheets a pass and paper only.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995536448,"sku":"4620001","price":1463.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/225Mi_HeroLeft_web_28dfe671-e623-4411-aabb-8713c9cf5cd5.png?v=1754951494"},{"product_id":"3312501","title":"Powershred 125Ci 100% Jam Proof Cross-Cut Shredder","description":"\u003cp\u003eThe 125Ci is where Fellowes' Powershred range crosses from small-office to commercial: twenty sheets a pass at DIN 66399 P-4, a 14-gallon bin, and a continuous-duty motor rather than a run-time budget.\u003c\/p\u003e\n\u003cp\u003eThe other number that matters is speed. Fellowes rates this machine at around 16 feet per minute, the fastest of the Ci cabinets, which is what turns twenty sheets a pass into real throughput rather than a specification. Combined with a lifetime cutter warranty, it is the model to put in a shared area that gets used every day.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty operation\u003c\/strong\u003e, with roughly 45 minutes of running before a cool-down is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-cut at 0.156 x 1.5 in\u003c\/strong\u003e (about 4 x 38 mm, roughly 152 mm²).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShred speed of about 16 ft\/min\u003c\/strong\u003e, the quickest in the Ci family.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e with SafeSense contact protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilentShred acoustic design\u003c\/strong\u003e and an Energy Savings System.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, CDs and DVDs, staples and paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine-inch throat, 14-gallon bin, 69 lb\u003c\/strong\u003e, with a two-year machine warranty and a lifetime warranty on the cutters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe lifetime cutter warranty is a genuine commercial differentiator and worth understanding. Cutting heads are the expensive part of a shredder and the part that wears; a machine whose cutters are covered indefinitely is one the manufacturer expects to survive years of departmental use. It also means the practical lifetime of the machine is determined by the motor and the electronics rather than by the cutters, which is the opposite of what happens to under-maintained office shredders.\u003c\/p\u003e\n\u003cp\u003eThat warranty assumes the machine is oiled. Fellowes asks for lubrication at every bin change with its part 35250, and a cutter failure traceable to running dry is not a manufacturing defect.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e0.156 x 1.5 in (approx. 4 x 38 mm, around 152 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e20 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e14 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous duty; approx. 45 minutes of running before a cool-down\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003eapprox. 16 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e69 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, CDs\/DVDs, staples, paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine, lifetime cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper. We have not published cabinet dimensions: our supplier data for the Powershred commercial models is demonstrably corrupted (four different machines listed at 17.13, 17.14, 17.15 and 17.16 inches deep) and we could not verify a clean set against Fellowes' documentation. Ask us and we will measure one. Fellowes publishes no decibel value for this model.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder on its 14-gallon pull-out bin, with power cord and operating instructions. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, and asks that the machine be oiled each time the waste bin is emptied. Aerosol lubricants must not be used in any shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 125Ci for a department or a shared floor that shreds daily. Continuous duty, twenty sheets a pass and 16 feet per minute mean it keeps up with a queue, the 14-gallon bin means emptying is not constant, and the lifetime cutter warranty makes it a defensible ten-year purchase rather than a three-year one.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you need micro-cut. This is a P-4 machine at roughly 152 mm², and the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is Fellowes' P-5 answer at 24 mm² — four sheets a pass fewer, and worth it if a policy requires it. Do not buy it if a bigger bin is what you actually want: the \u003cstrong\u003ePowershred 225Ci\u003c\/strong\u003e carries 16 gallons and 22 sheets, and the \u003cstrong\u003e425Ci\u003c\/strong\u003e carries 30 gallons with a 12-inch throat. And for a small office of five people, the \u003cstrong\u003e99Ci\u003c\/strong\u003e does the job for considerably less.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995569216,"sku":"3312501","price":875.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/125Ci_HeroLeft2_3d6315ff-a1fb-467f-9328-5794af6d3145.png?v=1754951496"},{"product_id":"3825001","title":"Powershred 225Ci 100% Jam Proof Cross-Cut Shredder","description":"\u003cp\u003eThe 225Ci is Fellowes' mid-size commercial cross-cut cabinet: twenty-two sheets a pass at DIN 66399 P-4, a 9.5-inch throat, a 16-gallon bin and a motor rated for continuous operation.\u003c\/p\u003e\n\u003cp\u003eIt sits between the 125Ci and the 425Ci in a range where the differences are capacity rather than security. All three are P-4 cross-cut machines cutting roughly 4 by 38 mm. What the 225Ci adds over the 125Ci is two more sheets, two more gallons and half an inch of throat; what it gives up against the 425Ci is eight sheets, fourteen gallons and two and a half inches of width.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwenty-two sheets per pass\u003c\/strong\u003e on 20 lb paper at DIN 66399 P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-cut at 5\/32 x 1 1\/2 in\u003c\/strong\u003e (3.9 x 38 mm per Fellowes' manual, about 148 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous duty.\u003c\/strong\u003e No scheduled cool-down to plan a session around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5-inch throat\u003c\/strong\u003e and a shred speed of about 14 ft\/min.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e16-gallon pull-out bin.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e with SafeSense contact protection and SilentShred acoustics.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, credit cards, CDs and DVDs, staples and small paper clips.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31.2 in H x 17.7 in W x 17.7 in D, 92 lb\u003c\/strong\u003e, at 120 V, 60 Hz, 6 A.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFellowes' own documentation is inconsistent about the sheet rating on this model. The 2012 operating manual states 20 sheets per pass; current retail listings and Fellowes' marketing quote 22. We have published 22 as the current figure and are telling you about the discrepancy so that you can plan against 20 if the specification matters. Either way, stapled sets, creased pages and glossy stock all reduce the practical number, and the Jam Proof system will decline an overload rather than attempt it.\u003c\/p\u003e\n\u003cp\u003eThe exclusion list is the same across the Powershred commercial cabinets: no adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large paper clips, file folders, X-rays or plastics other than credit cards and discs.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/2 in (3.9 x 38 mm, about 148 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e22 sheets of 20 lb paper (Fellowes' 2012 manual states 20)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e9.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e16 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShred speed\u003c\/th\u003e\n\u003ctd\u003eapprox. 14 ft\/min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical\u003c\/th\u003e\n\u003ctd\u003e120 V, 60 Hz, 6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e31.2 in H x 17.7 in W x 17.7 in D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e92 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, credit cards, CDs\/DVDs, staples, small paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper at rated voltage. Fellowes publishes no decibel value for this model, describing the acoustic design only as SilentShred.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder on its 16-gallon pull-out bin, with power cord and operating instructions. Fellowes specifies its own non-aerosol vegetable-based shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, and asks that the machine be oiled each time the waste bin is emptied. Aerosol lubricants must not be used in any shredder.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 225Ci for a department that shreds every day and wants headroom rather than a machine running at its limit. Continuous duty and a 16-gallon bin mean a records clear-out is a matter of emptying the bin rather than watching a timer, and the 9.5-inch throat takes a loose handful more comfortably than the 9-inch models.\u003c\/p\u003e\n\u003cp\u003eDo not buy it if you were told this machine is P-7. It is not, and our own supplier data was wrong about that — it is a P-4 cross-cut. If your requirement really is high security, the \u003cstrong\u003eFortishred HS-440\u003c\/strong\u003e is the only Fellowes machine in that class. Do not buy it if a policy names P-5 either; the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e shares this cabinet size at 16 sheets and 24 mm². And if your material includes ledger or A3, the \u003cstrong\u003ePowershred 425Ci\u003c\/strong\u003e with its 12-inch throat and 30-gallon bin is the right size up.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995601984,"sku":"3825001","price":1210.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/225Ci_HeroLeft_dc4ce7d7-3565-4e5d-99ee-e48eb57c21b4.png?v=1754951498"},{"product_id":"38425","title":"Powershred 425Ci 100% Jam Proof BAA Compliant Cross-Cut Shredder","description":"\u003cp\u003eThe 425Ci is the largest Powershred cross-cut cabinet in this group and the one built for a floor: thirty sheets a pass, a 12-inch throat, a 30-gallon bin and an automatic oiler so that the maintenance task nobody remembers happens by itself.\u003c\/p\u003e\n\u003cp\u003eThe throat is what distinguishes it. Twelve inches takes ledger and A3 flat and lets someone feed a loose handful without squaring it up, which is exactly how a shared machine gets used in practice. Combined with a continuous-duty motor and TAA compliance, it is a central shredding station rather than a departmental one.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve-inch throat.\u003c\/strong\u003e Ledger, A3, legal and letter all feed unfolded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThirty sheets per pass\u003c\/strong\u003e at DIN 66399 P-4, cut at 5\/32 x 1 1\/8 in (about 4 x 29 mm, roughly 113 mm² per particle).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic oiler.\u003c\/strong\u003e The machine lubricates its own cutters, which removes the single most-skipped maintenance task on any shared shredder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty motor\u003c\/strong\u003e for non-stop operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-gallon bin\u003c\/strong\u003e in a 22 x 20 x 37.5 in cabinet weighing 125 lb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Jam Proof System\u003c\/strong\u003e, SafeSense contact protection and an Energy Savings System.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShreds paper, staples, paper clips, credit cards, CDs and DVDs and junk mail.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTAA compliant\u003c\/strong\u003e, cUL approved and UL listed, with a two-year machine warranty and a lifetime warranty on the cutters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe auto-oiler is the feature that justifies this machine over a cheaper cabinet in many buildings. Every shredder needs lubrication, and on a shared machine it is the task that gets deferred until the cutters start struggling — at which point the sheet capacity has already dropped and someone is calling it faulty. A machine that oils itself removes the human factor from the one maintenance job that determines how long the cutters last, which is why the lifetime cutter warranty on this model is a reasonable commitment for Fellowes to make.\u003c\/p\u003e\n\u003cp\u003eNote also that the cut here is slightly finer than on the 125Ci and 225Ci: 5\/32 by 1 1\/8 inches rather than 5\/32 by 1 1\/2, about 113 mm² against 148 to 152. All three are P-4, so the class does not change, but the 425Ci produces the smallest particle of the group.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399)\u003c\/th\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eCross-cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5\/32 x 1 1\/8 in (approx. 4 x 29 mm, around 113 mm²)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e30 sheets of 20 lb paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e30 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuty cycle\u003c\/th\u003e\n\u003ctd\u003eContinuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLubrication\u003c\/th\u003e\n\u003ctd\u003eAutomatic oiler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e22 in W x 20 in D x 37.5 in H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e125 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs, junk mail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eTAA compliant; cUL approved and UL listed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years machine, lifetime cutters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp class=\"spec-note\"\u003eSheet ratings are Fellowes' figures for 8.5 x 11 in, 20 lb paper. Fellowes publishes no decibel value for this model. Our supplier data listed a 9.5-inch throat for this machine against the 12 inches Fellowes and its distributors publish; we have used the manufacturer figure.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\n\u003cp\u003eShredder on its 30-gallon pull-out bin, with power cord and operating instructions. The automatic oiler needs a supply of Fellowes shredder oil, part \u003cstrong\u003e35250\u003c\/strong\u003e, which is ordered separately. Aerosol lubricants must never be used.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\n\u003cp\u003eBuy the 425Ci as a central shredding station for a floor or a building. Thirty sheets a pass, a 12-inch throat, a 30-gallon bin and continuous duty mean it absorbs whatever arrives, the auto-oiler means it keeps doing so without anyone remembering to maintain it, and TAA compliance clears the procurement gate for federal and prime-contractor buyers.\u003c\/p\u003e\n\u003cp\u003eDo not buy it on the strength of a security level above P-7. No such level exists — the DIN 66399 paper scale ends at P-7 — and our supplier data claimed one for this machine, which was simply wrong. The 425Ci is a P-4 cross-cut machine. If you need micro-cut, the \u003cstrong\u003eMicroshred 225Mi\u003c\/strong\u003e is P-5; if you need genuine high security, the \u003cstrong\u003eFortishred HS-440\u003c\/strong\u003e is P-7 and takes four sheets a pass. Do not buy it for a small department either: at 125 lb, 37.5 inches tall and 30 gallons, it is more machine than eight people need, and the \u003cstrong\u003ePowershred 225Ci\u003c\/strong\u003e or \u003cstrong\u003e125Ci\u003c\/strong\u003e are better matched.\u003c\/p\u003e","brand":"Fellowes","offers":[{"title":"Default Title","offer_id":40693995634752,"sku":"38425","price":2892.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/425i_120V_HeroLeft_BAA_11237e40-8aa7-490e-967d-605c17dc1ba2.png?v=1754951501"},{"product_id":"hsm-pure-630-3-16-x-1-1-8-document-shredder-hsm2363","title":"HSM Pure 630 3\/16 x 1 1\/8 Document Shredder - HSM2363","description":"\u003cp\u003eThe HSM Pure 630 with the 4.5 x 30 mm head is the workgroup shredder most offices should be looking at before anything more exotic. It produces DIN 66399 P-4 particles, takes 20 to 22 sheets a pass, and holds about 1,590 shredded sheets in its 130 litre bin - enough that a team of six to ten people can share it without the bin becoming somebody's daily job.\u003c\/p\u003e\u003cp\u003eWhat separates it from the Pure 530 is not the cut, which is identical, but the reserve. Same particles, 40 percent more sheets per pass, 60 percent more bin. What separates it from the Pure 740 is the 310 mm feed opening rather than 400 mm, and a narrower cabinet that fits where the 740 does not.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 with margin, not P-4 on the line.\u003c\/strong\u003e The 4.5 x 30 mm particle is 135 mm2 against the 160 mm2 limit DIN 66399 sets for P-4. Machines that squeeze into P-4 at 155 mm2 are technically compliant; this one is not arguing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 to 22 sheets at 80 g\/m2.\u003c\/strong\u003e Measured on the same standard paper weight the rest of this page uses. Enough to take a whole day's printouts in a handful of passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,590 sheets per bin fill.\u003c\/strong\u003e HSM's published collection figure for the 130 litre bin with this cutting head. Particle-cut waste settles densely, which is why a 130 litre bin holds nearly twice what the same bin holds behind a strip-cut head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for cards, discs and staples.\u003c\/strong\u003e Classification E-3|F-1|O-3|P-4|T-4 covers credit cards, optical discs, magnetic carriers and film alongside paper. Staples and paper clips go straight through the induction-hardened rollers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-bin cut-out.\u003c\/strong\u003e The machine stops automatically when the bin is full rather than packing waste back into the cutting head, which is the most common way a shared shredder gets jammed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximately 55 dB(A) at idle.\u003c\/strong\u003e Quiet enough for an open-plan floor, on castors so it can be repositioned without a trolley.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 630\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4 (full classification E-3|F-1|O-3|P-4|T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e20 - 22 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e310 mm (12.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e130 l (34.3 US gal), approx. 1,590 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 55 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e538 x 487 x 889 mm (21.2\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e47.6 kg (105 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied as a complete floor cabinet on castors with the collecting bag frame and power lead. Waste bags are not included; the bin takes a 130 litre liner. There is no automatic oiler on this version - if you want one, the Pure 630 with external automatic oiler is the same machine with the pump fitted.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if a department of roughly six to ten people needs one shredder that satisfies a P-4 records-destruction policy and will not become a bottleneck. It is the default correct answer for most offices in this size band, and the 1,590-sheet bin means emptying is weekly rather than daily.\u003c\/p\u003e\u003cp\u003eLook elsewhere in three cases. If your feed opening needs to swallow wide continuous stationery or you want the extra headroom for stacked files, the HSM Pure 740 gives you 400 mm instead of 310 mm on a similar footprint. If nobody will reliably oil the cutting head, buy the Pure 630 with the external automatic oiler - particle-cut rollers lose capacity when they are run dry. And if your policy specifies P-5, this machine does not reach it; the Pure 830 1.9 x 15 mm or the Pure 740 max 1.9 x 15 mm are the P-5 options in this family.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935193152,"sku":"2363113","price":1628.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2363113_HSM_Pure_630_feature_image_1_JPG_RGB_1280x1280_57d24076-e20f-481b-8e53-8d95aef59f22.jpg?v=1759514215"},{"product_id":"hsm-pure-630-1-4-inch-strip-cut-document-shredder-hsm2361","title":"HSM Pure 630 1\/4 Inch Strip Cut Document Shredder - HSM2361","description":"\u003cp\u003eThe HSM Pure 630 in its 5.8 mm strip cut is the volume option in the 630 chassis. Where the particle-cut 630 manages 20 to 22 sheets, this one takes 35 to 37 at the same 80 g\/m2 paper weight, because a strip-cut head has far less work to do per pass. The trade is security: 5.8 mm strips are DIN 66399 P-2, which is a general-document classification, not a confidential-data one.\u003c\/p\u003e\u003cp\u003eThat makes this a specific tool rather than a general-purpose one. It is for offices that generate a lot of routine paper - internal printouts, superseded drafts, packing lists, mail that simply should not go in the recycling bin intact - and that shred genuinely sensitive records elsewhere or on a second machine.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 to 37 sheets per pass.\u003c\/strong\u003e HSM's figure at 80 g\/m2. The overview brochure quotes 40 to 42 for the same machine because it measures at 70 g\/m2 paper; both numbers are real, they just describe different paper. Buy against the 80 g\/m2 figure if your office runs standard 20 lb copier stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e310 mm feed opening.\u003c\/strong\u003e Wide enough for letter, legal and A4 portrait without folding, and wide enough that a loose stack drops in squarely rather than needing to be squared up first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130 litre bin.\u003c\/strong\u003e Roughly 1,085 to 1,170 shredded sheets in strip cut on this chassis. Strip cut is bulky waste, so this bin fills noticeably faster than the same bin behind a particle-cut head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting head rated for cards and discs.\u003c\/strong\u003e The classification is E-2|O-2|P-2|T-2, so credit cards, CDs, DVDs and floppy disks are inside specification alongside staples and paper clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty design.\u003c\/strong\u003e The Pure 630 is built for uninterrupted running rather than a duty cycle measured in minutes, with overload protection on the feed and automatic start\/stop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-roller warranty.\u003c\/strong\u003e P-2 sits comfortably inside the P-2 to P-5 band HSM covers with its lifetime roller warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 630\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-2 (full classification E-2|O-2|P-2|T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e5.8 mm (marketed as 1\/4\"; 5.8 mm is closer to 0.228\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e35 - 37 sheets at 80 g\/m2 (40 - 42 at 70 g\/m2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e310 mm (12.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e130 l (34.3 US gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 55 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e538 x 487 x 889 mm (21.2\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs, floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe Pure 630 ships as a floor cabinet on castors with a removable collecting bag frame and its power lead. Waste bags are not included - the bin takes a 130 litre liner. HSM does not publish a manufacturer bag part number for the US Pure 630 configuration, so match the bag by bin volume rather than by a part code you find on a third-party listing.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the right machine for a department that destroys large volumes of routine paper and treats shredding as housekeeping rather than as a data-protection control. Thirty-five sheets a pass means a full recycling tray goes through in a few minutes instead of twenty.\u003c\/p\u003e\u003cp\u003eIt is the wrong machine if the paper you are destroying contains personal data. P-2 strips are reconstructable with effort and most privacy policies written after GDPR and the state privacy statutes specify P-4 or better for records containing identifiable individuals. If that describes your paper, buy the HSM Pure 630 4.5 x 30 mm instead - identical chassis, identical bin, P-4 security, 20 to 22 sheets. If you need both, the honest answer is that most offices are better served by one P-4 machine than by a fast P-2 machine plus a bad habit.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935225920,"sku":"2361113","price":1313.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2361113_HSM_Pure_630_feature_image_1_JPG_RGB_1280x1280_a378bea7-403c-43fe-b62f-763efd3664cb.jpg?v=1759514235"},{"product_id":"hsm-pure-630-3-16-x-1-1-8-with-external-automatic-oiler-hsm23634","title":"HSM Pure 630 3\/16 x 1 1\/8 with External Automatic Oiler - HSM23634","description":"\u003cp\u003eThis is the HSM Pure 630 with the maintenance problem engineered out of it. The 4.5 x 30 mm P-4 cutting head, the 310 mm feed opening, the 130 litre bin and the 700 W motor are all identical to the standard 630; what is added is an external automatic oiler that doses the cutting rollers on its own schedule.\u003c\/p\u003e\u003cp\u003eThat matters more than it sounds. A particle-cut head run without oil loses sheet capacity gradually and then jams, and by the time an office notices, the machine that was rated for 22 sheets is struggling with twelve. The oiler is not a convenience feature, it is the difference between a shredder that performs to specification in year four and one that does not.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternally mounted automatic oiler.\u003c\/strong\u003e The pump and reservoir sit outside the cabinet, so checking the level and refilling do not require access to the cutting head or a service call.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentical P-4 cut to the standard 630.\u003c\/strong\u003e 4.5 x 30 mm particles, 135 mm2, classification E-3|F-1|O-3|P-4|T-4. Adding the oiler changes nothing about the security rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 to 22 sheets at 80 g\/m2, sustained.\u003c\/strong\u003e The point of the oiler is that this figure stays true. Unoiled particle-cut heads drift downwards; this one does not.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130 litre bin, about 1,590 shredded sheets.\u003c\/strong\u003e Weekly emptying for a department shredding a few hundred pages a day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-bin shutoff and overload protection.\u003c\/strong\u003e The machine stops when the bin is full and reverses the rollers when the feed is overloaded, rather than forcing waste back through the head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty on the cutting rollers.\u003c\/strong\u003e P-4 sits inside HSM's P-2 to P-5 coverage band for the induction-hardened solid steel rollers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 630\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4 (full classification E-3|F-1|O-3|P-4|T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e20 - 22 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e310 mm (12.2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e130 l (34.3 US gal), approx. 1,590 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 55 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e538 x 487 x 889 mm (21.2\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e47.6 kg (105 lb) for the shredder; the oiler adds a small amount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubrication\u003c\/td\u003e\n\u003ctd\u003eExternal automatic oiler, fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet on castors, collecting bag frame, external automatic oiler fitted, power lead. Waste bags are not included - the bin takes a 130 litre liner. The oiler consumes HSM cutting-roller oil; order a supply with the machine so the reservoir is not run dry in the first months, which would defeat the purpose of buying this version.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this version if the shredder is shared. Shared machines are exactly the ones nobody oils, because responsibility for them is diffuse. A department of six to ten people running a P-4 policy is the textbook case for an automatic oiler, and the price difference over the standard 630 is small against the cost of a cutting head that has been run dry for two years.\u003c\/p\u003e\u003cp\u003eSkip it if one person owns the machine and will genuinely oil it at every bin change - the standard Pure 630 does the same work for less. Skip it too if you need a wider feed opening, where the Pure 740 with external automatic oiler gives you 400 mm and 145 litres, or if you need P-5, where the Pure 740 max 1.9 x 15 mm is the oiled option in this family.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935258688,"sku":"2363113O","price":2069.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2363113O_HSM_Pure_630_feature_image_1_JPG_RGB_1280x1280_695b0729-f2df-473d-a267-0aec5c54d3cf.jpg?v=1759514256"},{"product_id":"hsm-pure-740-1-4-inch-strip-cut-document-shredder-hsm2371","title":"HSM Pure 740 1\/4 Inch Strip Cut Document Shredder - HSM2371","description":"\u003cp\u003eThe HSM Pure 740 in 5.8 mm strip cut exists for one reason: throughput on bulk paper. A 400 mm feed opening is the widest in the Pure line short of the 740 max, and at 35 to 37 sheets a pass with a 145 litre bin behind it, this is the machine you put in a mailroom or a records store rather than beside a desk.\u003c\/p\u003e\u003cp\u003eThe security classification is P-2, and that is the honest limit of what it is for. Five-point-eight millimetre strips are fine for internal paper you simply do not want leaving the building legible. They are not an appropriate control for records that identify individuals.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 mm feed opening.\u003c\/strong\u003e The practical benefit is that stacks go in without being squared up, and wide-format printouts and continuous stationery fit. On a machine used by many people, a wide throat removes most of the day-to-day friction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 to 37 sheets at 80 g\/m2.\u003c\/strong\u003e HSM's 70 g\/m2 figure for the same head is 40 to 42. Both are published; the 80 g\/m2 number is the safer one to plan against for standard US copier paper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145 litre bin, about 1,085 shredded sheets.\u003c\/strong\u003e Strip-cut waste is bulky and springs back, which is why a bigger bin holds fewer sheets here than the particle-cut version of the same machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCards, discs and magnetic media in specification.\u003c\/strong\u003e Classification E-2|O-2|P-2|T-2. Staples and paper clips pass straight through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous running.\u003c\/strong\u003e Designed to keep going rather than to stop for a cool-down, with overload protection on the feed and automatic start\/stop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximately 56 dB(A) at idle.\u003c\/strong\u003e Quiet for a machine this size, though a mailroom is the natural home for it regardless.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 740\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-2 (full classification E-2|O-2|P-2|T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e5.8 mm (marketed as 1\/4\"; 5.8 mm is closer to 0.228\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e35 - 37 sheets at 80 g\/m2 (40 - 42 at 70 g\/m2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e400 mm (15.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e145 l (38.3 US gal), approx. 1,085 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e620 x 487 x 889 mm (24.4\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e47.2 kg (104 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs, floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet on castors with collecting bag frame and power lead. Waste bags are not supplied; the bin takes a 145 litre liner. No oiler is fitted to this model, and strip-cut heads need less lubrication than particle-cut heads, but they are not maintenance-free.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis suits a mailroom, a print room or a records archive working through legacy paper in volume, where the material is routine and the priority is getting through it. The 400 mm throat and the 35-sheet bite make it genuinely fast in a way a narrower P-4 machine is not.\u003c\/p\u003e\u003cp\u003eIt is the wrong choice for anything covered by a privacy policy. If the paper contains names, account numbers or health information, the HSM Pure 740 4.5 x 30 mm is the same machine at P-4 with 21 to 22 sheets - you give up roughly 40 percent of the throughput and gain a defensible destruction standard. If you also want a large bin and the oiler, the Pure 740 max is the step up. And if you need P-2 speed on an even bigger scale, the Pure 830 3.9 mm takes 42 to 44 sheets on a 1,920 W motor.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935455296,"sku":"2371113","price":1731.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2371113_HSM_Pure_740_feature_image_1_JPG_RGB_1280x1280_f290e78e-330f-4dca-b0e1-b8f83318d49d.jpg?v=1759514276"},{"product_id":"hsm-pure-740-3-16-x-1-1-8-with-external-automatic-oiler-hsm23734","title":"HSM Pure 740 3\/16 x 1 1\/8 with External Automatic Oiler - HSM23734","description":"\u003cp\u003eTake the Pure 740's 400 mm feed opening and P-4 cutting head, then remove the one maintenance task offices reliably fail to perform. That is what this version is. The external automatic oiler lubricates the cutting rollers from a reservoir mounted outside the cabinet, on the machine's own schedule, without anyone having to feed an oiled sheet through the throat.\u003c\/p\u003e\u003cp\u003eFor a shredder that will be shared by a department, this is the variant that makes sense. Diffuse responsibility and manual lubrication do not coexist. Everything else - 21 to 22 sheets at 80 g\/m2, a 145 litre bin, 700 W, around 56 dB(A) idle - matches the standard Pure 740 exactly.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal automatic oiler as fitted equipment.\u003c\/strong\u003e Reservoir and pump outside the cabinet. Topping it up is a periodic job, not a per-bin ritual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 mm feed opening.\u003c\/strong\u003e The widest throat in the standard Pure range. Tabloid, A3 and folded plans go in unfolded; loose handfuls feed without squaring up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 at 4.5 x 30 mm.\u003c\/strong\u003e 135 mm2 particles against DIN 66399's 160 mm2 ceiling for P-4, classified E-3|F-1|O-3|P-4|T-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145 litre bin, about 1,860 shredded sheets.\u003c\/strong\u003e Roughly a working week for a department destroying 400 pages a day.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSustained rather than nominal throughput.\u003c\/strong\u003e The reason to pay for an oiler is that the 21-to-22-sheet figure is still true in year four.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty on the cutting rollers.\u003c\/strong\u003e HSM's induction-hardened solid steel rollers, covered for P-2 through P-5 cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 740\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4 (full classification E-3|F-1|O-3|P-4|T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e21 - 22 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e400 mm (15.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e145 l (38.3 US gal), approx. 1,860 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e620 x 487 x 889 mm (24.4\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e53.6 kg (118 lb) for the shredder; the oiler adds a small amount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubrication\u003c\/td\u003e\n\u003ctd\u003eExternal automatic oiler, fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet on castors, collecting bag frame, external automatic oiler fitted, power lead. Waste bags are not included - the bin takes a 145 litre liner. Order HSM cutting-roller oil with the machine; an oiler with an empty reservoir is just a more expensive standard Pure 740.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is for a department of ten to fifteen people where the shredder belongs to everyone and therefore to no one. If you have ever walked past a shared shredder and wondered when it was last oiled, this is the version to buy. The wide throat also makes it the right P-4 choice for teams handling mixed or oversized paper.\u003c\/p\u003e\u003cp\u003eThere are cheaper right answers in some cases. If a single named person owns and maintains the machine, the standard Pure 740 is the same shredder for less. If 310 mm of throat is plenty, the Pure 630 with external automatic oiler gives you the same cut and the same oiler in a narrower cabinet. If bin changes rather than lubrication are your bottleneck, the Pure 740 max carries 240 litres with the oiler fitted as standard. And if your policy requires P-5, none of these three reach it - the Pure 740 max 1.9 x 15 mm or the Pure 830 1.9 x 15 mm do.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935488064,"sku":"2373113O","price":2354.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2373113O_HSM_Pure_740_feature_image_1_JPG_RGB_1280x1280_a447f2f9-29fa-4467-8076-b730efbab5b2.jpg?v=1759514300"},{"product_id":"hsm-pure-740-3-16-x-1-1-8-cross-cut-document-shredder-hsm2373","title":"HSM Pure 740 3\/16 x 1 1\/8 Cross Cut Document Shredder - HSM2373","description":"\u003cp\u003eAmong the Pure machines that reach DIN 66399 P-4, the Pure 740 with the 4.5 x 30 mm head is the one you buy for the feed opening. Four hundred millimetres is 90 mm wider than the Pure 630 and 70 mm wider than the Pure 830, and on a machine used by a dozen people that width is what stops the queue.\u003c\/p\u003e\u003cp\u003eThe rest of the specification is solidly mid-range: 21 to 22 sheets a pass at 80 g\/m2, a 145 litre bin holding roughly 1,860 shredded sheets, a 700 W motor and about 56 dB(A) at idle. It is a departmental machine that behaves like one.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 mm feed opening on a P-4 machine.\u003c\/strong\u003e Wide-format documents, folded plans and tabloid printouts go in without folding, and casual handfuls of loose paper feed cleanly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5 x 30 mm particles, 135 mm2.\u003c\/strong\u003e Comfortably inside the 160 mm2 DIN 66399 sets as the P-4 ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,860 shredded sheets per bin.\u003c\/strong\u003e HSM's collection figure for the 145 litre bin with this head - about 70 percent more than the same bin behind the strip-cut version, because particle waste settles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated E-3|F-1|O-3|P-4|T-4.\u003c\/strong\u003e Film, optical discs, magnetic carriers, cards, staples and paper clips are all within specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, standby and full-bin cut-out.\u003c\/strong\u003e The machine manages its own idle state and stops before it packs a full bin back into the cutting head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-roller warranty.\u003c\/strong\u003e P-4 sits inside the P-2 to P-5 band HSM covers for its induction-hardened solid steel rollers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty construction.\u003c\/strong\u003e This is not a machine with a five-minute run time and a thirty-minute cool-down. The Pure 740 is built to keep going for as long as paper is being fed into it, which is what separates a departmental shredder from a desk-side one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCastors and a wide cabinet door.\u003c\/strong\u003e The bag frame lifts out through a full-width opening rather than being wrestled up past the cutting head, and the whole cabinet rolls when the floor plan changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 740\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4 (full classification E-3|F-1|O-3|P-4|T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e21 - 22 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e400 mm (15.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e145 l (38.3 US gal), approx. 1,860 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e620 x 487 x 889 mm (24.4\" x 19.2\" x 35.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e53.6 kg (118 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eComplete floor cabinet on castors, collecting bag frame, power lead. Waste bags are not included and the bin takes a 145 litre liner. This version has no automatic oiler - the Pure 740 with external automatic oiler is the same machine with the pump fitted, and is the version to choose if the shredder will be shared.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the machine for a department of ten to fifteen people that shreds to a P-4 standard and wants the widest throat it can get at this price. If your paper is not uniformly letter-size - drawings, wide reports, folded plans, mixed archive material - the 400 mm opening is worth more than any other single specification on the page.\u003c\/p\u003e\u003cp\u003eDo not buy it if the width is irrelevant to you: the Pure 630 has the identical cutting head and a 130 litre bin in a narrower cabinet for less money. Do not buy it if nobody will oil it - choose the external automatic oiler version. And if you are shredding at a volume where bin changes dominate, the Pure 740 max carries 240 litres and roughly 2,950 sheets with the oiler fitted as standard.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935520832,"sku":"2373113","price":2256.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2373113_HSM_Pure_740_feature_image_1_JPG_RGB_1280x1280_9a2aa9a0-8eec-4896-986b-31a430b7ead9.jpg?v=1759514320"},{"product_id":"hsm-pure-740-max-3-16-x-1-1-8-plus-external-automatic-oiler-hsm2373m","title":"HSM Pure 740 max 3\/16 x 1 1\/8 with External Automatic Oiler - HSM2373M","description":"\u003cp\u003eThis is the Pure 740 max configured for volume rather than for maximum security. It keeps the big machine's 240 litre cabinet, its 400 mm feed opening and its externally fitted automatic oiler, and pairs them with the familiar 4.5 x 30 mm P-4 cutting head - so you get 20 to 22 sheets a pass and about 2,950 shredded sheets between bin changes.\u003c\/p\u003e\u003cp\u003eThe practical effect is a P-4 shredder that a whole floor can use for a fortnight without anybody touching it beyond feeding paper in. If the reason you keep looking at larger machines is bin changes rather than security, this is the one that solves your problem.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 litre bin, about 2,950 shredded sheets.\u003c\/strong\u003e Two-thirds more collection capacity than the standard Pure 740, and around three times the Pure 530. Bin changes become a fortnightly event for most departments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle distributor.\u003c\/strong\u003e Waste is spread across the bin rather than piling beneath the outfeed. Without it, a bin this size would be declared full while a third of it was still empty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal automatic oiler fitted as standard.\u003c\/strong\u003e No manual lubrication routine to forget on a machine that will be shared by dozens of people.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-4 at 4.5 x 30 mm.\u003c\/strong\u003e 135 mm2 particle area, comfortably inside the 160 mm2 DIN 66399 limit for P-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 mm feed opening.\u003c\/strong\u003e Ledger, A3 and folded plans go in unfolded; loose handfuls feed without squaring up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel-reinforced wooden cabinet on castors.\u003c\/strong\u003e Built for a busy corridor position rather than a desk-side one, and still movable when the floor plan changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 740 max\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e20 - 22 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e400 mm (15.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e240 l (63.4 US gal), approx. 2,950 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e670 x 784 x 1347 mm (26.4\" x 30.9\" x 53.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e76.4 kg (168 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubrication\u003c\/td\u003e\n\u003ctd\u003eExternal automatic oiler, fitted as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eWooden-floor cabinet with steel-reinforced base on castors, collecting bag frame, external automatic oiler fitted, particle distributor, power lead. Waste bags are not included and the 240 litre bin takes a larger liner than the 145 litre Pure 740 - check the size before reordering from an old part number. Order HSM cutting-roller oil alongside the machine.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is a floor-level machine for an organisation that has decided P-4 is the correct standard and wants to stop thinking about the shredder. Fifteen to thirty people can share it. The 2,950-sheet bin, the automatic oiler and the particle distributor between them remove almost all of the routine attention a shared shredder normally demands.\u003c\/p\u003e\u003cp\u003eIt is over-specified for a small team - the Pure 630 or the standard Pure 740 do the same P-4 cut in a much smaller cabinet, and at 784 mm deep and 1,347 mm tall this machine takes real floor space. It is also the wrong machine if you need to destroy CDs, credit cards or magnetic media: HSM lists paper, staples and paper clips only for the 740 max, with no optical or magnetic classification, so plan a separate route for those. If your policy calls for P-5, the sibling Pure 740 max 1.9 x 15 mm is the identical cabinet with a micro-cut head, trading down to 14 to 15 sheets a pass.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935553600,"sku":"2373113X","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2373113X_HSM_Pure_740max_feature_image_1_JPG_RGB_1280x1280_de6b8861-3458-4a02-bffe-586e11075924.jpg?v=1759514347"},{"product_id":"hsm-pure-740-max-1-16-x-5-8-with-external-automatic-oiler-hsm2372m","title":"HSM Pure 740 max 1\/16 x 5\/8 with External Automatic Oiler - HSM2372M","description":"\u003cp\u003eThe Pure 740 max 1.9 x 15 mm is the highest-security machine in this range and the only one here that reaches DIN 66399 P-5. Its particles are 28.5 mm2, against the 30 mm2 ceiling P-5 allows - a genuinely fine micro-cut, and a very different proposition from the 135 mm2 P-4 particles the rest of the Pure family produces.\u003c\/p\u003e\u003cp\u003eThe 'max' in the name is the cabinet. Two hundred and forty litres of bin holding roughly 3,050 shredded sheets, on a 1,347 mm tall chassis with an external automatic oiler fitted as standard. HSM built this configuration for organisations that need P-5 and cannot afford to be emptying a bin twice a day to get it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP-5 at 1.9 x 15 mm.\u003c\/strong\u003e 28.5 mm2 per particle. DIN 66399 caps P-5 at 30 mm2, so this sits just inside the class - which is what P-5 looks like when it is real rather than aspirational.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 litre bin, about 3,050 shredded sheets.\u003c\/strong\u003e Roughly three times the collection capacity of the standard Pure 740 chassis. On a high-security cut with a modest sheet rating, that bin is what makes the machine usable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal automatic oiler fitted as standard.\u003c\/strong\u003e Micro-cut heads are the most lubrication-sensitive of all. HSM does not offer this machine without the oiler, and that is the right decision.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 mm feed opening.\u003c\/strong\u003e Full width despite the fine cut, so oversized and mixed paper still goes in unfolded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParticle distributor.\u003c\/strong\u003e Spreads waste across the bin instead of letting it pile under the outfeed, which is what lets a 240 litre bin actually reach its rated 3,050 sheets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximately 56 dB(A) at idle.\u003c\/strong\u003e The same acoustic figure as the standard 740, on a 700 W motor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 740 max\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (micro cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e1.9 x 15 mm (approx. 1\/16\" x 5\/8\"); 28.5 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e14 - 15 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e400 mm (15.75\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e240 l (63.4 US gal), approx. 3,050 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e670 x 784 x 1347 mm (26.4\" x 30.9\" x 53.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e76.2 kg (168 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLubrication\u003c\/td\u003e\n\u003ctd\u003eExternal automatic oiler, fitted as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eWooden-floor cabinet with steel-reinforced base on castors, collecting bag frame, external automatic oiler fitted, particle distributor, power lead. Waste bags are not included; the bin takes a 240 litre liner, which is a larger bag than the rest of the Pure range uses - do not assume your existing 145 litre stock will fit. Order HSM cutting-roller oil with the machine.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if a written policy specifies P-5 and the machine has to serve a team rather than one desk. Legal, finance, healthcare administration and R\u0026amp;D records are the usual drivers. The combination of a genuine P-5 cut, a 400 mm throat, a fitted oiler and a bin that holds 3,050 sheets is unusual; most P-5 machines force you to choose between security and bin size.\u003c\/p\u003e\u003cp\u003eDo not buy it for general office paper. Fourteen to fifteen sheets a pass is slow, and you are paying for security you do not need - the Pure 740 4.5 x 30 mm handles 21 to 22 sheets at P-4 for less money. Do not buy it if you need to destroy optical discs or magnetic media either: HSM lists this machine's shreddable materials as paper, staples and paper clips only, with no O or T classification, so discs and drives need separate provision. And do not buy it expecting it to fit a small room - at 784 mm deep and 1,347 mm tall it is a substantially bigger object than the standard Pure 740.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935586368,"sku":"2372113X","price":3029.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2372113X_HSM_Pure_740max_feature_image_1_JPG_RGB_1280x1280_bef556d5-639c-482e-be6a-76f314edf359.jpg?v=1759514374"},{"product_id":"hsm-pure-830-3-16-x-1-1-8-cross-cut-document-shredder-hsm2383","title":"HSM Pure 830 3\/16 x 1 1\/8 Cross Cut Document Shredder - HSM2383","description":"\u003cp\u003eIf there is one machine in the Pure range that resolves the usual trade-off between security and speed, it is this one. Thirty-three to thirty-five sheets a pass at DIN 66399 P-4 is a strip-cut sheet rating with a particle-cut output, and the 1,920 W motor is what makes it possible.\u003c\/p\u003e\u003cp\u003eFor comparison within its own family: the Pure 630 and Pure 740 produce identical 4.5 x 30 mm particles and manage 20 to 22 sheets on 700 W. The Pure 830 does the same job at roughly 60 percent higher throughput. What you give up for it is a narrower 330 mm throat than the 740's 400 mm, about 5 dB(A) more noise, and a demanding electrical supply.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e33 to 35 sheets at 80 g\/m2, at P-4.\u003c\/strong\u003e The highest particle-cut sheet rating in the Pure range by a wide margin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,920 W motor.\u003c\/strong\u003e Nearly three times the power of the 700 W Pure 630 and 740, which is the entire reason the sheet count is what it is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5 x 30 mm particles, 135 mm2.\u003c\/strong\u003e Inside the 160 mm2 DIN 66399 sets as the P-4 ceiling, classified E-3|F-1|O-3|P-4|T-4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 litre bin, about 1,860 shredded sheets.\u003c\/strong\u003e Comparable collection to the Pure 740's bin, in a cabinet 40 mm narrower.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for cards, discs, film and magnetic media.\u003c\/strong\u003e Staples and paper clips pass through the induction-hardened rollers without preparation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous-duty design with full-bin cut-out.\u003c\/strong\u003e Automatic start\/stop, standby, overload protection on the feed and a wide cabinet door for bag changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 830\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-4 (full classification E-3|F-1|O-3|P-4|T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (cross cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e4.5 x 30 mm (approx. 3\/16\" x 1 1\/8\"); 135 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e33 - 35 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e330 mm (13.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e150 l (39.6 US gal), approx. 1,860 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e579 x 548 x 954 mm (22.8\" x 21.6\" x 37.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e73 kg (161 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet with wooden base on castors, removable collecting bag frame, wide door opening, power lead. Waste bags are not included; the bin takes a 150 litre liner. There is no automatic oiler option on the Pure 830, so manual lubrication of the particle-cut head needs to be somebody's named responsibility - order shredder oil or oil sheets at the same time.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis is the machine for a department that has standardised on P-4 and shreds enough that the 20-sheet ceiling on the Pure 630 and 740 has become annoying. Fifteen to thirty people can share it comfortably. It is also the sensible central machine for a floor that wants one shredder rather than three.\u003c\/p\u003e\u003cp\u003eThree reasons to choose something else. Electrical supply: 1,920 W at 120 V is about 16 A, which needs a dedicated circuit - if you cannot provide one, the 700 W Pure 740 is the pragmatic answer at 21 to 22 sheets. Throat width: at 330 mm this is 70 mm narrower than the Pure 740, so if oversized or folded documents are routine, the 740 is easier to live with. Lubrication: with no oiler option here, a shared 830 depends on someone remembering, whereas the Pure 740 with external automatic oiler does not. If your policy specifies P-5 rather than P-4, the Pure 830 1.9 x 15 mm is this same chassis at 19 to 21 sheets.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935619136,"sku":"2383133","price":3220.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2383133_HSM_Pure_830_feature_image_1_JPG_RGB_1280x1280_a58d3203-4267-42df-8919-a1782b3a474e.jpg?v=1759514396"},{"product_id":"hsm-pure-830-1-16-x-5-8-cross-cut-document-shredder-hsm23834","title":"HSM Pure 830 1\/16 x 5\/8 Cross Cut Document Shredder - HSM23834","description":"\u003cp\u003eThe Pure 830 in 1.9 x 15 mm is the machine to look at when a P-5 requirement collides with real departmental volume. Most P-5 shredders sacrifice throughput to get the particle size down; this one answers with a 1,920 W motor - nearly three times the power of every other machine in the Pure range - and still manages 19 to 21 sheets a pass.\u003c\/p\u003e\u003cp\u003eThat combination is the whole argument for it. Nineteen sheets at P-5 is a figure most micro-cut machines in this price band cannot approach, and unlike the Pure 740 max it also carries the full E-4|F-2|O-4|P-5|T-5 classification, so optical discs and magnetic media are within specification alongside paper.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,920 W motor.\u003c\/strong\u003e The reason the sheet count holds up at P-5. Fine cutting is work, and this chassis has the power to do it without labouring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.9 x 15 mm micro-cut particles.\u003c\/strong\u003e 28.5 mm2, inside the 30 mm2 ceiling DIN 66399 sets for P-5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull media classification E-4|F-2|O-4|P-5|T-5.\u003c\/strong\u003e Unusually broad for a P-5 machine. Optical discs are destroyed to O-4 and magnetic carriers to T-5, which is materially higher than the O-3\/T-4 the P-4 Pure machines manage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 litre bin, about 1,900 shredded sheets.\u003c\/strong\u003e HSM's collection figure for this head. Micro-cut waste is dense, which is why the bin holds more sheets here than the strip-cut 830's 1,395.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic start\/stop, standby and full-bin cut-out.\u003c\/strong\u003e Standard across the Pure range and worth having on a machine this powerful.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime cutting-roller warranty.\u003c\/strong\u003e P-5 is the top of HSM's P-2 to P-5 coverage band, so this machine is included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 830\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-5 (full classification E-4|F-2|O-4|P-5|T-5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eParticle cut (micro cut)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e1.9 x 15 mm (approx. 1\/16\" x 5\/8\"); 28.5 mm2 particle area\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e19 - 21 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e330 mm (13.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e150 l (39.6 US gal), approx. 1,900 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e579 x 548 x 954 mm (22.8\" x 21.6\" x 37.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e74 kg (163 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet with wooden base on castors, removable collecting bag frame, wide door opening, power lead. Waste bags are not included; the bin takes a 150 litre liner. No automatic oiler is fitted to the Pure 830, and a micro-cut head needs regular lubrication - order HSM shredder oil or oil sheets with the machine and put roller oiling on a schedule someone owns.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy the 830 micro-cut if you need P-5 for a department and you also need to destroy discs and magnetic media on the same machine. The O-4 and T-5 classifications are the differentiator against the Pure 740 max, which is paper-only. It is also the right choice where throughput at P-5 matters: 19 to 21 sheets is a real working rate, not a token one.\u003c\/p\u003e\u003cp\u003eThe honest counter-arguments are power, noise and bin size. This machine draws 1,920 W - check the circuit it will sit on before ordering, particularly on a shared 15 A office circuit. It idles at around 60 dB(A), noticeably louder than the 55 to 56 dB(A) of the smaller Pure machines, so it belongs in a print room rather than beside desks. And its 150 litre bin is far smaller than the Pure 740 max's 240 litres, so if bin changes are your pain point rather than security, the max cabinet is the better answer. If P-4 is sufficient, the Pure 830 4.5 x 30 mm on this same chassis takes 33 to 35 sheets.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935651904,"sku":"2382133","price":3649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/HSM_Pure_830_P1_JPG7HJjGE5c2wQV3_1280x1280_3beaf633-1ec5-4901-9886-857c3b7e22e5.jpg?v=1759514417"},{"product_id":"hsm-pure-830-1-8-inch-strip-cut-document-shredder-hsm2380","title":"HSM Pure 830 1\/8 inch Strip Cut Document Shredder - HSM2380","description":"\u003cp\u003eForty-two to forty-four sheets in a single pass makes this the fastest machine in the Pure range on paper, and the 1,920 W motor behind it is why. The Pure 830 in 3.9 mm strip cut is a bulk-destruction machine: put it where paper arrives by the tray rather than by the folder.\u003c\/p\u003e\u003cp\u003eOne correction worth making before you order. This model is widely listed as a 1\/8 inch strip cut, but HSM's cutting size is 3.9 mm, which is 0.154 inches - closer to 5\/32 than to 1\/8. The security classification is unaffected, but if you are comparing particle sizes across brands, use the metric figure.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e42 to 44 sheets at 80 g\/m2.\u003c\/strong\u003e The highest sheet rating in the Pure family. A full printer tray of waste goes through in a couple of passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,920 W motor.\u003c\/strong\u003e Substantial power for a strip cut, which is what turns a high nominal sheet count into a rate the machine can actually sustain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e330 mm feed opening.\u003c\/strong\u003e Letter, legal, A4 and A3 all fit portrait without folding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 litre bin, about 1,395 shredded sheets.\u003c\/strong\u003e Strip-cut waste is bulky and springy, so this bin holds fewer sheets than the same bin behind the 830's micro-cut head, which manages about 1,900.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad media handling.\u003c\/strong\u003e Classified E-2|O-2|P-2|T-2, so credit cards, optical discs, floppy disks, staples and paper clips are all within specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty on the cutting rollers.\u003c\/strong\u003e P-2 sits inside HSM's P-2 to P-5 coverage for the induction-hardened solid steel rollers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContinuous operation, not a duty cycle.\u003c\/strong\u003e There is no run-time limit to work around. Feed it for an hour and it will keep cutting; the only interruptions are a full bin or an overloaded feed, and the rollers reverse automatically to clear the latter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide cabinet door and castors.\u003c\/strong\u003e Bag changes happen frequently on a machine this fast, so the full-width door matters more here than on a lower-volume shredder. The cabinet rolls on castors despite weighing 68 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eHSM Pure 830\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSecurity level (DIN 66399 \/ ISO 21964)\u003c\/td\u003e\n\u003ctd\u003eP-2 (full classification E-2|O-2|P-2|T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut type\u003c\/td\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCut size\u003c\/td\u003e\n\u003ctd\u003e3.9 mm (listed as 1\/8\"; 3.9 mm is 0.154\", nearer 5\/32\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSheet capacity\u003c\/td\u003e\n\u003ctd\u003e42 - 44 sheets at 80 g\/m2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeed \/ throat width\u003c\/td\u003e\n\u003ctd\u003e330 mm (13.0\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBin volume\u003c\/td\u003e\n\u003ctd\u003e150 l (39.6 US gal), approx. 1,395 shredded sheets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNoise level\u003c\/td\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e579 x 548 x 954 mm (22.8\" x 21.6\" x 37.6\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e68 kg (150 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShreddable materials\u003c\/td\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs, floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eFloor cabinet with wooden base on castors, removable collecting bag frame, wide door opening, power lead. Waste bags are not included; the bin takes a 150 litre liner. Strip-cut heads need less oil than particle-cut heads, but they still need it - order shredder oil or oil sheets with the machine.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis machine earns its place in a mailroom, a print room or a records project clearing legacy files by the box. Where the material is routine and the volume is the problem, 42 to 44 sheets a pass and a 1,920 W motor turn a two-hour job into a twenty-minute one.\u003c\/p\u003e\u003cp\u003eIt is not a data-protection control. P-2 permits particles up to 800 mm2 and a 3.9 mm strip runs the full length of the sheet, so anything carrying names, account numbers or health information should not go through it. For that paper on the same chassis, the Pure 830 4.5 x 30 mm gives you P-4 at 33 to 35 sheets - still fast - and the Pure 830 1.9 x 15 mm gives you P-5 at 19 to 21. Also check your electrical supply: 1,920 W at 120 V is 16 A, which is more than a standard 15 A office circuit should carry.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935684672,"sku":"2380133","price":2661.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2380133_HSM_Pure_830_feature_image_1_JPG_RGB_1280x1280_39ece717-5d50-46ba-ab79-8827154f251d.jpg?v=1759514442"},{"product_id":"hsm-pure-940-1-16-x-5-8-cross-cut-document-shredder-hsm23934","title":"HSM Pure 940 1\/16 x 5\/8 Cross Cut Document Shredder - HSM23934","description":"\u003cp\u003eThis is the high-security configuration of the HSM Pure 940: a 1.9 x 15 mm particle cut rated DIN 66399 P-5, fitted to the same 43.6-gallon departmental cabinet as the rest of the range. The single thing that distinguishes it from its siblings is that it is the only Pure 940 that produces particles small enough for most organisations' personal-data policies, and the price of that is sheet capacity: 19 to 21 sheets a pass instead of the 33-35 you get from the P-4 version. If your paper is regulated, that trade is usually the right one.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1.9 x 15 mm particle cut, 28.5 mm² per particle - comfortably inside the DIN P-5 ceiling of 30 mm².\u003c\/li\u003e\n\u003cli\u003e19-21 sheets per pass at 80 g\/m², high for a P-5 machine because of the full-width 400 mm cutting head.\u003c\/li\u003e\n\u003cli\u003e43.6-gallon (165 l) cabinet holds roughly 2,090 sheets of P-5 waste, so high-security shredding does not mean constant bin trips.\u003c\/li\u003e\n\u003cli\u003e15.75-inch throat accepts letter, legal and tabloid without folding, and takes stapled and clipped documents.\u003c\/li\u003e\n\u003cli\u003eMedia rated as well as paper: credit cards and optical discs at O-4, the highest optical class HSM assigns in this range.\u003c\/li\u003e\n\u003cli\u003eSolid steel induction-hardened rollers, covered by HSM's lifetime cutting-roller warranty at P-5.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399 \/ ISO\/IEC 21964)\u003c\/th\u003e\n\u003ctd\u003eP-5 (also rated E-4 | F-2 | O-4 | T-5)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eParticle cut (micro-cut class)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/16\" x 5\/8\" (1.9 x 15 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e19-21 sheets at 80 g\/m² (20-22 at 70 g\/m² per HSM's range brochure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e15.75\" (400 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e43.6 gal (165 l), pull-out cabinet on castors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e24.41\" x 19.17\" x 40.2\" (620 x 487 x 1021 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e200.6 lb (91 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper including staples and paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year machine warranty; lifetime warranty on the solid steel cutting rollers (HSM applies the roller warranty to P-2 through P-5 models only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eSupplied assembled on the wheeled cabinet with the collecting-bag frame, power cord and operating instructions. \u003cstrong\u003eShredder bags are not included\u003c\/strong\u003e and are ordered separately as a consumable.\u003c\/p\u003e\u003ch2\u003eMaintenance and Consumables\u003c\/h2\u003e\u003cp\u003eTwo consumables determine what this machine costs to run: bags and oil. The 165-litre cabinet takes roughly 2,090 sheets of P-5 waste per fill, so a department shredding a ream a day changes the bag about weekly. Oil matters more at P-5 than at coarser cuts, because the fine particles produce a paper dust that packs into the roller teeth and quietly erodes sheet capacity over months. Oil across the full throat width, run the machine briefly in reverse, then feed a few waste sheets to distribute it.\u003c\/p\u003e\u003cp\u003eOn power, the 1,920 W drive pulls close to 16 A at 120 V. A dedicated circuit is the sensible provision, particularly if the machine will run for long periods during file purges. Plan the position around the drawer as well as the cabinet: it is 24.4 inches wide, 40 inches tall and needs clearance in front to roll the bin out.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it if a department generates a steady flow of personal or commercially sensitive paper - HR, finance, legal, clinical records, client files - and you need one machine that satisfies a P-5 policy without turning shredding into someone's afternoon. Nineteen to twenty-one sheets a pass with a 165-litre bin is a genuinely productive combination at this security level.\u003c\/p\u003e\u003cp\u003eDo not buy it purely for throughput. If your paper is ordinary internal record-keeping, the \u003cstrong\u003eHSM Pure 940 3\/16\" x 1 1\/8\"\u003c\/strong\u003e gives you 33-35 sheets a pass at P-4 for less money, and the \u003cstrong\u003eHSM Pure 940 1\/4\" strip cut\u003c\/strong\u003e gives you 51-53 at P-2. Equally, if your policy specifies P-6 or P-7, this machine does not reach it and no Pure 940 does; you would need a dedicated high-security model. And at 200 lb on a 24-inch-wide cabinet, this is a fixed installation, not something to squeeze beside a desk.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935848512,"sku":"2392133","price":5984.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/HSM_Pure_940_P1_JPG_1280x1280_3d8119b7-199b-4f8f-b1f1-1fb4d5a9d8ef.jpg?v=1759514462"},{"product_id":"hsm-pure-940-1-4-inch-strip-cut-document-shredder-hsm2391","title":"HSM Pure 940 1\/4 Inch Strip Cut Document Shredder - HSM2391","description":"\u003cp\u003eThe HSM Pure 940 in 1\/4-inch strip cut is the throughput model of the Pure 940 range: it takes 51 to 53 sheets of 80 g\/m² paper in a single pass and empties into a 43.6-gallon cabinet, which makes it a central shredder for a floor or a department rather than a desk-side machine. What separates it from its two siblings is purely the cutting head. Strip cut buys you roughly two and a half times the sheet capacity of the 1\/16\" x 5\/8\" version, and it costs you security: strips are DIN 66399 P-2, which is appropriate for internal paperwork but not for personal data you are obliged to protect.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e51-53 sheets per pass at 80 g\/m², the highest manual capacity of any Pure 940 configuration.\u003c\/li\u003e\n\u003cli\u003e15.75-inch throat swallows letter, legal and tabloid sheets without folding, and takes stapled or clipped documents straight from the file.\u003c\/li\u003e\n\u003cli\u003e43.6-gallon (165 l) cabinet holds roughly 816 sheets of strip-cut waste before it needs emptying - strip waste is bulky, so the bin fills faster per sheet than on the particle-cut models.\u003c\/li\u003e\n\u003cli\u003eInduction-hardened solid steel cutting rollers carry HSM's lifetime roller warranty at this security level.\u003c\/li\u003e\n\u003cli\u003eAutomatic start\/stop with reverse for clearing an overfeed; continuous-duty drive rated at 1,920 W.\u003c\/li\u003e\n\u003cli\u003eCabinet rolls on castors, so it can be repositioned or wheeled out for emptying without lifting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399 \/ ISO\/IEC 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 (also rated E-2 | F-1 | O-2 | T-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/4\" (5.8 mm) strips\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e51-53 sheets at 80 g\/m² (HSM quotes 65-67 at 70 g\/m² in its range brochure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e15.75\" (400 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e43.6 gal (165 l), pull-out cabinet on castors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e24.41\" x 19.17\" x 40.2\" (620 x 487 x 1021 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e176.4 lb (80 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper including staples and paper clips, credit cards, CDs and DVDs, floppy disks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year machine warranty; lifetime warranty on the solid steel cutting rollers (HSM applies the roller warranty to P-2 through P-5 models only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe machine arrives assembled on its wheeled cabinet with the collecting-bag frame, power cord and operating instructions. \u003cstrong\u003eShredder bags are not supplied\u003c\/strong\u003e - they are a consumable and are ordered separately by bin size.\u003c\/p\u003e\u003ch2\u003eRunning It Day to Day\u003c\/h2\u003e\u003cp\u003eStrip cut is the least demanding cut for the machine and the most demanding on the bin. The 5.8 mm strips stay long and springy, so they bridge and trap air as they fall; the 165-litre cabinet is rated at roughly 816 sheets, well under half what the same cabinet holds when a particle-cut head is fitted. The practical consequence is that bag changes, not motor duty, set the pace of a large purge. Keep two or three spare bags with the machine and change at three-quarters full rather than waiting for the bin to jam against the lid.\u003c\/p\u003e\u003cp\u003eThe cabinet is 24.4 inches wide and stands 40 inches tall, so it needs a genuine footprint plus clearance in front for the drawer to pull out. It draws 1,920 W, which on a 120 V supply is close to 16 A - give it its own circuit rather than sharing a strip with printers or space heaters. Oiling is manual; there is no automatic oiler fitted.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it if your bottleneck is volume: an eight-to-twelve-person department clearing box files, expired print runs, internal reports and mailroom overflow. At 51-53 sheets a pass you can feed it a full folder at a time, and the 43.6-gallon cabinet means the facilities team is not emptying it daily.\u003c\/p\u003e\u003cp\u003eDo not buy it if the paper contains personal data. P-2 strips are 5.8 mm wide and full page-height; they are legible enough that most privacy programs will not accept them for HR files, medical records, payroll or customer lists. If that is your paper, move to the \u003cstrong\u003eHSM Pure 940 3\/16\" x 1 1\/8\"\u003c\/strong\u003e (P-4, 33-35 sheets) or, for the strictest internal policies, the \u003cstrong\u003eHSM Pure 940 1\/16\" x 5\/8\"\u003c\/strong\u003e (P-5, 19-21 sheets). Both use the same cabinet, throat and motor, so the only thing you trade is sheets per pass.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935881280,"sku":"2391133","price":3316.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2391133_HSM_Pure_940_feature_image_1_JPG_RGB_1280x1280_ea9b1c38-22ad-4ea5-b415-53ec6edbd67c.jpg?v=1759514484"},{"product_id":"hsm-pure-940-3-16-x-1-1-8-cross-cut-document-shredder-hsm2393","title":"HSM Pure 940 3\/16 x 1 1\/8 Cross Cut Document Shredder - HSM2393","description":"\u003cp\u003eOf the three Pure 940 configurations, this is the one most departments actually end up buying: a P-4 particle cut that satisfies ordinary confidentiality policies while still taking 33 to 35 sheets in a single pass. It sits exactly between the 51-53 sheet strip-cut model, which is too coarse for personal data, and the 19-21 sheet P-5 model, which is slower than most offices need. Same 43.6-gallon cabinet, same 15.75-inch throat, same 1,920 W drive - only the cutting head changes.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eP-4 particle cut, the level most organisations accept for general confidential paperwork.\u003c\/li\u003e\n\u003cli\u003e33-35 sheets per pass at 80 g\/m² - roughly 70% more than the P-5 Pure 940 in the same cabinet.\u003c\/li\u003e\n\u003cli\u003e43.6-gallon (165 l) cabinet holds around 2,178 sheets of waste, the largest sheet count of any Pure 940 configuration.\u003c\/li\u003e\n\u003cli\u003e15.75-inch throat takes letter, legal and tabloid unfolded, with staples and paper clips left in place.\u003c\/li\u003e\n\u003cli\u003eRated for credit cards, CDs and DVDs and film as well as paper (O-3, T-4, F-1).\u003c\/li\u003e\n\u003cli\u003eInduction-hardened solid steel rollers with HSM's lifetime cutting-roller warranty.\u003c\/li\u003e\n\u003cli\u003eWheeled pull-out cabinet, automatic start\/stop and reverse for clearing overfeeds.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399 \/ ISO\/IEC 21964)\u003c\/th\u003e\n\u003ctd\u003eP-4 (also rated E-3 | F-1 | O-3 | T-4)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eParticle cut (cross-cut class)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e3\/16\" x 1 1\/8\" as listed for this US article number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e33-35 sheets at 80 g\/m² (39-41 at 70 g\/m² per HSM's range brochure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e15.75\" (400 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBin volume\u003c\/th\u003e\n\u003ctd\u003e43.6 gal (165 l), pull-out cabinet on castors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor \/ power consumption\u003c\/th\u003e\n\u003ctd\u003e1,920 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 60 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e24.41\" x 19.17\" x 40.2\" (620 x 487 x 1021 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e200.6 lb (91 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper including staples and paper clips, credit cards, CDs and DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e3-year machine warranty; lifetime warranty on the solid steel cutting rollers (HSM applies the roller warranty to P-2 through P-5 models only)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cem\u003eA note on the cut size:\u003c\/em\u003e HSM's European datasheet for the equivalent article number describes this cutting head as 3.9 x 40 mm, while the US listing quotes 3\/16\" x 1 1\/8\". Both figures fall inside the DIN 66399 P-4 class (maximum 160 mm²), and the security rating is unaffected. If your procurement paperwork requires an exact particle dimension, confirm it against HSM's datasheet for article 2393133 before ordering.\u003c\/p\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eDelivered assembled on the wheeled cabinet with the collecting-bag frame, power cord and operating instructions. \u003cstrong\u003eShredder bags are not included.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003ePlacement and Power\u003c\/h2\u003e\u003cp\u003eAt 24.4 inches wide, 19.2 inches deep and 40.2 inches tall on castors, the Pure 940 is a piece of office furniture rather than a desk accessory, and it needs clear floor in front so the bin drawer can be pulled fully out. Weight is 200 lb, so decide where it lives before it is uncrated. The 1,920 W drive draws close to 16 A at 120 V; a dedicated circuit avoids nuisance trips when a purge runs long.\u003c\/p\u003e\u003cp\u003eNoise is quoted at approximately 60 dB(A) at idle - noticeably present in a quiet room, unremarkable in a copy room or a corridor alcove, which is where most buyers put it. Maintenance is limited to bag changes and periodic oiling of the cutting rollers with HSM shredder oil; there is no automatic oiler on this model, so build the oiling step into whoever's routine already covers the bag.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This - and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy it as a shared floor or departmental shredder where the paper is a mix of routine internal documents and confidential files, and where nobody wants to stand and feed sheets. Thirty-three to thirty-five sheets a pass into a 165-litre cabinet handles a large office's daily output plus the occasional archive clear-out.\u003c\/p\u003e\u003cp\u003eDo not buy it if a written policy specifies P-5 or higher for personal data - go to the \u003cstrong\u003eHSM Pure 940 1\/16\" x 5\/8\"\u003c\/strong\u003e instead and accept 19-21 sheets a pass. Equally, if you are only destroying non-sensitive paper in bulk, the \u003cstrong\u003eHSM Pure 940 1\/4\" strip cut\u003c\/strong\u003e gives you 51-53 sheets for less. And if the machine will serve one or two people, this is oversized: a SECURIO AF-series autofeed shredder will cost far less and do the job without a 200 lb cabinet in the room.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751935914048,"sku":"2393133","price":3997.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/2393133_HSM_Pure_940_feature_image_1_JPG_RGB_1280x1280_52eb9bad-f444-472e-bb02-b8ab3a7f2d5f.jpg?v=1759514506"},{"product_id":"hsm-securio-b34-1-8-inch-strip-cut-document-shredder-hsm1840","title":"HSM SECURIO B34 1\/8 inch Strip Cut Document Shredder - HSM1840","description":"\u003cp\u003eThe HSM SECURIO B34 in 1\/8 inch (3.9 mm) strip cut is the volume option in the B34 line: it takes 25 to 27 sheets of 80 g\/m² paper in a single pass, more than any cross-cut B34 will manage, and it does so at DIN 66399 security level P-2. That trade is the whole point of this model. If your shredding is routine internal paperwork rather than regulated personal data, the strip-cut rollers move it faster and jam less than a particle-cut head on the same 310 mm chassis. If the paper contains customer or employee data, stop reading and look at the P-4 sibling instead.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.2\" throat (310 mm).\u003c\/strong\u003e Letter, legal, A4 and 11 in tabloid stock feed in without folding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN 66399 level P-2 at 1\/8\" strip (3.9 mm).\u003c\/strong\u003e Verified from HSM's own European datasheet rather than a distributor listing, so the security class and the cut geometry agree.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 - 27 sheets per pass at 80 g\/m².\u003c\/strong\u003e HSM rates capacity at 80 g\/m²; standard US 20 lb bond is about 75 g\/m², so expect slightly more in practice, not less.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e26.4 gal (100 L) container built into the cabinet.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandles staples, paper clips, credit cards and CDs\/DVDs.\u003c\/strong\u003e No document prep, and no separate media shredder for the occasional disc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700 W drive, approximately 56 dB(A) at idle.\u003c\/strong\u003e Quiet enough to sit in an open office rather than a service room.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime warranty on the induction-hardened solid steel cutting rollers.\u003c\/strong\u003e HSM applies this cover to P-2 through P-5 machines, which includes this one.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399 \/ ISO IEC 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 — full classification E-2 | O-2 | P-2 | T-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e1\/8\" strip (3.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e25 - 27 sheets at 80 g\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat width\u003c\/th\u003e\n\u003ctd\u003e12.2\" (310 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContainer volume\u003c\/th\u003e\n\u003ctd\u003e26.4 gal (100 L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive power\u003c\/th\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 56 dB(A) at idle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e21.3\" x 17.3\" x 33.3\" (541 x 439 x 845 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e76.1 lb (34.5 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples, paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting roller warranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eAll figures above are taken from HSM's European datasheet for article number 1840111, the metric-native source for this model. Sheet capacity is stated at 80 g\/m².\u003c\/p\u003e\n\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe shredder ships assembled: cutting head, cabinet and the integrated 100 L collection container, plus the power cord and operating instructions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShredder bags are not included.\u003c\/strong\u003e HSM lists collection bags and cutting-block oil as separate consumables. The bags for this chassis are the reusable collection bags for HSM 225, 386 and SECURIO B34, sold in packs of 10 or 100 (1410995000 \/ 1410995100); a cardboard box - b34 is also available. Order at least one pack with the machine.\u003c\/p\u003e\n\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eBuy this if you shred high volumes of ordinary internal paperwork - drafts, superseded print runs, meeting packs - and want the fastest B34 available. At 25 to 27 sheets a pass it will keep up with a floor of 15 to 25 people without becoming a queue.\u003c\/p\u003e\u003cp\u003eDo not buy this if the paper contains names, account numbers, medical information or anything else a privacy policy would call personal data. Strip cut at P-2 leaves legible fragments and most data-protection guidance treats it as inadequate. The \u003cstrong\u003eHSM SECURIO B34 3\/16 x 1 1\/8 inch (HSM1843)\u003c\/strong\u003e is the same machine at DIN P-4 and is the correct choice for regulated paper. If you need P-4 but with a wider 400 mm throat and a bigger bin, step up to the \u003cstrong\u003eSECURIO B35 3\/16 x 1 1\/8 inch (HSM1923)\u003c\/strong\u003e.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751940468800,"sku":"1840113","price":1145.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/1840113_HSM_SECURIO_B34_feature_image_1_JPG_RGB_1280x1280_bb07c7a4-6d1e-407a-ab69-7d301529a1b9.jpg?v=1759515970"},{"product_id":"hsm-securio-b34-1-4-strip-cut-document-shredder-hsm1841","title":"HSM SECURIO B34 - 1\/4\" Strip Cut Document Shredder - HSM1841","description":"\u003cp\u003eThe SECURIO B34 in 5.8 mm strip cut is the highest-throughput machine in the whole B32\/B34 family: 30 to 32 sheets of 80 g\/m2 paper per pass at DIN 66399 P-2, into a 100-litre pull-out container. It shares the 310 mm feed opening with the smaller B32, so the difference you are paying for is the bigger motor, the bigger bin and the higher sheet count - not a wider throat.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 to 32 sheets per pass.\u003c\/strong\u003e The highest paper capacity across both chassis. If clearing volume is the job, nothing else in the range is quicker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700 W motor.\u003c\/strong\u003e Ninety watts more than the B32, and the reason this machine sustains a higher feed rate rather than backing off into its reverse cycle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-litre waste container.\u003c\/strong\u003e Rated by HSM at about 658 sheets of 5.8 mm strip waste. Strip cut is bulky, so a big bin matters more here than on a micro-cut model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated for staples, paper clips, cards and optical media.\u003c\/strong\u003e HSM lists this model at E-2, O-2, P-2 and T-2, so stapled sets, old badges and obsolete discs all fall within what it is built for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic light-barrier operation.\u003c\/strong\u003e Starts when paper enters, stops when the throat clears. EcoSmart control holds standby draw at 0.1 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSame 310 mm feed opening as the B32.\u003c\/strong\u003e Letter, legal and tabloid all pass fed short edge first. The B34 is taller and deeper, not wider at the throat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSecurity level (DIN 66399 \/ ISO\/IEC 21964)\u003c\/th\u003e\n\u003ctd\u003eP-2 — full rating E-2 | O-2 | P-2 | T-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut type\u003c\/th\u003e\n\u003ctd\u003eStrip cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCut size\u003c\/th\u003e\n\u003ctd\u003e5.8 mm strip (approx. 1\/4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSheet capacity\u003c\/th\u003e\n\u003ctd\u003e30–32, measured at 80 g\/m\u003csup\u003e2\u003c\/sup\u003e paper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThroat \/ intake width\u003c\/th\u003e\n\u003ctd\u003e310 mm (12.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWaste container volume\u003c\/th\u003e\n\u003ctd\u003e100 l (26.4 gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eContainer capacity in shredded sheets\u003c\/th\u003e\n\u003ctd\u003e658 sheets at this cut (HSM figure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor power\u003c\/th\u003e\n\u003ctd\u003e700 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVoltage \/ frequency (US model)\u003c\/th\u003e\n\u003ctd\u003e110-120 V \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eapprox. 56 dB(A) (idle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions (W x D x H)\u003c\/th\u003e\n\u003ctd\u003e541 x 439 x 845 mm (21.3 x 17.3 x 33.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e34.5 kg (76.1 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShreddable materials\u003c\/th\u003e\n\u003ctd\u003ePaper, staples and paper clips, credit cards, CDs\/DVDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExternal automatic oiler\u003c\/th\u003e\n\u003ctd\u003eNot fitted on this article\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003eLifetime warranty on the induction-hardened solid steel cutting rollers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eArticle number (US \/ EU)\u003c\/th\u003e\n\u003ctd\u003e1841113 \/ 1841111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eWhat's in the Box\u003c\/h2\u003e\u003cp\u003eThe HSM SECURIO B34 arrives assembled: the cutting head and cabinet are a single unit, with the 100 l (26.4 gal) waste container in place behind the cabinet door, plus the mains lead and the HSM operating manual. There is no oiler on this article — lubrication, where required, is a manual task.\u003c\/p\u003e\u003cp\u003eShredder bags and HSM's fitting cardboard waste box are consumables and are \u003cstrong\u003enot included\u003c\/strong\u003e — order them with the machine if you do not intend to empty the container loose. A strip-cut head of this size is not on HSM’s routine oiling schedule, so no oil is needed to put it into service.\u003c\/p\u003e\u003ch2\u003eWho Should Buy This — and Who Should Not\u003c\/h2\u003e\u003cp\u003eThis belongs in a mailroom, print room, records office or school administration block where the daily job is getting rid of a lot of non-sensitive paper quickly. At 30-plus sheets a pass with a 100-litre bin, it will absorb a filing-cabinet clear-out without anyone standing over it.\u003c\/p\u003e\u003cp\u003eIt is the wrong choice the moment security level enters the conversation. P-2 is a 5.8 mm ribbon and it will not stand up to an audit of how you destroy personal data. For that, move up the same chassis: the B34 at 1.9 x 15 mm gives P-5, and the 0.78 x 11 mm version gives P-6. If you like this cut but the volume does not justify the footprint - the B34 is 541 mm wide, 439 mm deep and 845 mm tall, and weighs 34.5 kg - the SECURIO B32 in the identical 5.8 mm strip takes 25 to 27 sheets in a smaller cabinet, usually for meaningfully less money.\u003c\/p\u003e","brand":"HSM","offers":[{"title":"Default Title","offer_id":40751940501568,"sku":"1841113","price":1274.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/files\/1841113_HSM_SECURIO_B34_feature_image_1_JPG_RGB_1280x1280_1bfb6d2a-465a-42b3-894a-434c6d427b12.jpg?v=1759515998"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0589\/2387\/6416\/collections\/2604HR-M_062465b9-3606-47b1-879a-7aad68da7242.png?v=1778100865","url":"https:\/\/shreddermaster.com\/collections\/commercial-large-office-shredders.oembed?page=3","provider":"Shredder Master","version":"1.0","type":"link"}